• 한국임상수의학회지
• /
• 제32권1호
• /
• pp.45-48
• /
• 2015

돼지의 희석정액을 glass wool filtration 한 후 양질의 정자를 선별하고자 실시하였다. 돼지의 정액을 채취한 후 glass wool 높이와 시간에 따른 정자의 농도, 기형율, 생존율, 그리고 운동성을 조사하였다. Glass wool 여과 후 정자의 농도는 줄었으나, 정상 정자비율과 생존율은 상승하였고, 운동성의 변화는 나타나지 않았다. 이상의 결과들을 통해 돼지 정자의 glass wool 여과는 상대적으로 낮은 기형율과 높은 생존율을 가진 정자를 얻을 수 있는 방법임을 알 수 있었다.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6816-6822
• /
• 2015

본 연구에서는 기존의 글라스울의 흡습에 의한 변형을 해결하고 단열성능향상을 위해 실리카 에어로젤을 이용한 단열재를 개발하였다. 글라스울 단열재에 액상의 혼합 바인더를 이용하여 실리카에어로젤이 함침된 글라스울 복합체를 제조하였다. 액상의 혼합 바인더는 수용성바인더(CMC, carboxymethyl cellulose)와 물에 분산시킨 실리카 에어로젤을 이용하여 준비하였다. 초기 $0.048g/cm^3$의 밀도를 갖는 글라스울 보드를 준비하고 실리카 에어로젤을 함침시켜 $0.065g/cm^3$의 밀도를 갖는 단열보드를 제작할 수 있었다. 이렇게 제조된 실리카 에어로젤 함침 글라스울 보드 복합체는 단일 글라스울 보드의 단열성능보다 7.4% 향상된 0.0315 W/mK의 열전도율(thermal conductivity)을 나타내었다. 제조된 실리카 에어로젤-글라스울 복합체는 불꽃 관통시험에서 362초간 내화 저항성을 나타내어 단일 글라스울 보드에 비하여 2.7배나 높은 내화성능을 보였다. 또한 일반 글라스울 보드는 흡습에 의하여 수직방향으로 처짐현상을 나타내는 단점이 있었으나, 실리카 에어로젤이 함침된 보드에서는 실리카 에어로젤의 발수특성으로 인하여 높은 내수성능을 나타내는 것을 확인하였다.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.221-231
• /
• 2005

In this study, occupational exposures to man-made mineral fibers (MMMFs) including glass wool, rock wool, and continuous glass filament fibers were determined and evaluated on the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV). A total of 171 personal samples collected from 4 glass wool fiber, 2 rock wool fibers, 4 continuous filament glass fiber products manufacturing and a glass fiber and rock wool insulations using industries, and determined respirable fibers concentrations using the National Institute for Occupational Safety and Health (NIOSH) Method 7400, "B counting rule. The fiber concentrations of samples from workers installing thermal insulations in a MMMF using industry showed the highest value: geometric mean (GM) = 0.73 f/cc and maximum = 2.9 f/cc, 70% of them were above the TLV, 1 f/cc. Workers' exposure level (GM= 0.032 f/cc) in the rock wool manufacturing industries was significantly higher than those of glass wool (GM=0.012 f/cc) and continuous filament glass fibers (GM=0.010 f/cc) manufacturing industries (p<0.01). No samples were more than the TLV in the MMMF manufacturing industries. There was a significant difference among companies in airborne fiber levels.

• 한국수정란이식학회지
• /
• 제7권2호
• /
• pp.133-136
• /
• 1992

Glass wool filtration and swim-up method resulted in inreasing to 58.3% and 62.7% of the progressive motility in frozen-thawed boar sperm, compared to 34.2% in the untreated sperm. Glass wool filtration tended to be more successful than swim-up method for the survival sfter incubation of 38.5$^{\circ}C$ for 3h. Sperm recovered by both the swim-up method and the glass wool filtration method were tested in an in vitro fertilization to determine which of the two techniques would yield sperm with high fertilizing capacity. The results indicated that there was a significantly(p

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.448-455
• /
• 2018

Glass wool is an eco-friendly materials that is manufactured through a continuous process by processing waste glass. This materials is low cost compared with another materials and has excellent thermal conductivity. For this reason, glass wool is installed as insulation system for LNG carriers and as insulation of building wall as well as various industries. The mechanism of insulation of glass wool is the conduction of the wool itself and convection by space between fibers. Therefore, in order to develop the enhanced thermal conductivity of glass wool is necessary to reduce its own conduction or to insert additional material after manufacturing as well as prevent convection. In this respect, many researchers have been actively studying to decrease thermal conductivity of polyurethane foam using by inserted glass wool or change the chemical component of glass wool. However, many research are aiming reduction of glass wool itself. This study focus on post-processing and inserted different materials; silica-aerogel, kevlar fiber 1mm, 6mm and glass bubble. Experimental results show that the thermal conductivity almost decreases with the addiction of glass bubble and silica aerogel.

• 한국임상수의학회지
• /
• 제22권3호
• /
• pp.228-232
• /
• 2005

Damaged spermatozoa are supposed to be trapped in glass wool. In the respect of this, two glass wool filtration spermatozoa groups (0.5 cm, 1 cm depth) were compared with control group to assay sperm motility, HOS values, and vital rate by CFDA/PI staining method following glass wool filtration. The motility of canine sperm extended with PBS+PVP after glass wool filtration was lower in both filtrated groups than that of the control group (p<0.01) and the same significant difference was also shown in canine semen extended with Tris buffer (p<0.01). The motility of canine sperm diluted with PBS+PVP was higher than that diluted with Tris buffer in the same experimental groups (p<0.05). The motility of control group was not significantly decreased until 2 hours immediately after extending, however, the motility of both glass wool filtrated spermatozoa were significantly decreased as time passed until 2 hours after filtration (p<0.01). At each time for assay (immediately, 30 min, 2 hours after filtration), the motility of canine sperm of control group was higher than the filtrated groups (p<0.05), whereas the motility of 0.5 cm depth group was higher than 1 cm depth group at the immediate time after filtration (p<0.05), 30 minutes later (p<0.05) with no difference at 2 hours. No difference was shown among the experimental groups in HOS values of canine sperm after glass wool filtration. The vital rate assayed by CFDA/PI staining of both filter groups was higher than the control group (p<0.05).

• 한국건축시공학회지
• /
• 제16권2호
• /
• pp.117-123
• /
• 2016

글라스울(Glass Wool)은 건설 현장 및 여러 다양한 분야에서 단열재로 사용되고 있다. 글라스울의 경우 불연재료이며 화재시 유해한 가스를 발생시키지 않으므로, 단열재로서의 사용이 더욱 권고되고 있는 상황이다. 그러나 글라스울이 반복적인 습윤 건조의 싸이클에 노출되면, 공극의 감소및 수축이 발생하여 단열성능을 잃게 되므로, 주기적인 교체가 필요하다. 본 연구에서는 이러한 폐글라스울을 콘크리트용 첨가재료로 활용하여 역학적 성능을 개선하고자 하는 시도를 하였다. 실험 결과에 따르면 폐글라스울은 약한 포졸란 반응성을 가지며, 압축강도 및 휨강도의 증가 효과를 가짐을 알 수 있었으며, 이를 위한 최적의 폐글라스울 혼입량은 콘크리트 체적의 0.5%에 해당되는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.77-78
• /
• 2022

To improve the fire vulnerability of the organic insulation sandwich panel core, which is the main culprit of the large-scale fire disaster, an experiment was conducted to examine the thermal conductivity properties of the core material mixed with the organic insulation material EPS Bead and the inorganic insulation material glass wool. As the Additional ratio of glass wool increased, the thermal conductivity decreased, and it was determined that the replacement of glass wool of 3% or more had little effect on the decrease in thermal conductivity. In addition, it can be seen that the most ideal thermal conductivity is exhibited when 1% Replacement ratio of EPS and 3% glass wool are added. The core material of such organic and inorganic insulation materials is judged to be a core material that can compensate for the fire vulnerability of existing insulation materials. Therefore, in order to determine whether it is used as a core material for sandwich panels, additional studies such as fire resistance experiments and sound absorption experiments are needed in the future.

• 한국산업보건학회지
• /
• 제15권3호
• /
• pp.213-220
• /
• 2005

Penetration and health effect of fibers was related with their diameters and length. The purpose of this study is to characterize and compare the diameter and length of airborne man-made mineral fibers(MMMF) or synthetic vitreous fibers in the related industries. The average fiber length of the continuous filament glass, rock wool, refractory ceramic, and glass wool fibers production industries approximately 27, 28, 35, $50-105{\mu}m$. Airborne glass fibers were longest in all the type of MMMFs. The average diameters of airborne fibers generated from refractory ceramic, rock wool, glass wool, continuous filament glass fibers production industries were approximately 1.0, 1.6, 1.5-4 and $10{\mu}m$, respectively. The percentages of respirable fibers(<$3{\mu}m$) were 94% for RCFs, 73% for rock wool fibers, 61.0% for glass fibers, and 1.6% for filament glass fibers. The length of glass fibers were the longest in all types of fibers, and length of the others were similar. The refractory ceramic fibers were smallest in diameters and highest in fraction of respirable fibers.

• Nuclear Engineering and Technology
• /
• 제18권4호
• /
• pp.261-266
• /
• 1986

원자력발전소에서 사용되고 있는 증발기에 대해 boron의 탈비말 동반을 분석하기 위하여 강제순환식 및 반연속식 증발기가 실험에 사용되었다. 보수가 용이하고 제염효율이 높은 Cyclone과 glass-wool 충전탑을 액체방사성폐기물을 처리하는데 탈비말동반장치로 사용되었다. Cyclone과 glass-wool 충전탑을 연결하여 사용하였을 때 붕소에 대한 제염효율은 1,000 이상을 나타내었다.