• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.31.2-31.2
• /
• 2009

In this research, single walled carbon nano-tube film was manufactured with spray coating method on glass for application as transparent heat element. SWNTs solution to be used for spraying is obtained by dispersion of 0.01 wt% purified SWNTs in dimethylformamide (DMF) solution through ultrasonification and centrifugation. The transmittance and sheet resistance of SWNTs film were determined by the number of spray injection. Manufactured SWNTs film will have sheet resistance range of $200\;\Omega/\square-900\;\Omega/\square$ at transmittance range of 70-90 %. Heat generation characteristic of SWNTs film was measured by applying constant DC voltage of 15V. The result confirmed that SWNTs film with sheet resistance of $200\;\Omega/\square$ reaches surface temperature of $80^{\circ}C$ within several seconds. In addition, PET coating film was coated on top of the SWNTs film by using laminator in order to solve weak adhesive property of the spray coated SWNTs film on the substrate as well as to maintain its electrical and optical properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.75-78
• /
• 2006

An external electrode fluorescent lamps (EEFLs) have the advantage of a long lifetime in the early stages of the study on plasma discharge, interest in the lamp continues. Studies on the operation of external electrode fluorescent lamps have focused mainlyon its use of a type of high frequency (MHz). By performing high brightness using a square wave operation method with the low frequency below 100kHz, which is applied to a narrowed tube type lamp that has several mm of lamp diameter, an EEFL presented the possibility of using it as a light source for backlights. However, because an EEFL generates plasma using wall charges, which considers the impedance characteristics of glass based on the structural principle in discharge, it can be significantly affected by frequency. Thus, this study verifies the change in the characteristics of electromagnetic fields according to the change in frequency through a Maxwell's electromagnetic field simulation and examines the relationship between the change in the EEFL frequency and brightness by measuring the optical. characteristics. In addition, the characteristics of the transformation of energy orbits were verified by investigating the characteristics of the wavelength according to the change in frequency through the OES.

• The Korean Journal of Physiology
• /
• 제7권2호
• /
• pp.21-23
• /
• 1973

To see if the Panax Ginseng has any influence upon the amount of water and food intake, an experiment was carried out using 30 male rats. The animals were divided equally into the ginseng and the saline groups. For 5 days, animals belonging to the ginseng group received every day 0.5 ml/100g body weight of ginseng extract (4 mg of ginseng alcohol extract in 1 ml of saline), while animals belonging to the saline group received the same amount of saline. After the last medication on the 5th day, each animal was accommodated in a cage which was provided with a food well and a water supplier made of glass tube bent $30^{\circ}$ at the tip. The amounts of water and food consumed in the daytime (from 6 a.m. to 6 p.m.) and at night (from 6 p.m. to 6 a.m. next morning) were measured for 2 days. The ginseng group tended to consume water and food slightly more than the saline group did. However, the difference between the 2 group was far from reaching significancy. The influence of Panax Ginseng upon water and food intake was not evident.

• 대한전자공학회논문지
• /
• 제23권5호
• /
• pp.699-705
• /
• 1986

Sb2S3 thin films were fabricated by vacuum evaporation of compound Sb2S3 at a pressure of 10**-5 torr. and in argon ambient. Then, their electrical and photoconductive properties were investigated. The Sb2S3 glass-layer showed maximum photosensitivity at the deposition rate of 250\ulcornersec, and Sb2S3 porous layer had mininum dielectric constant of 1.5 at the deposition rate of 0.3 um/sec and argon partial pressure of 0.2torr. Sb2S3 multi-layers were prepared at the different thickness ratio (B/A) to find the proper structural property suited for camera pick-up tube. Here, A is the sum of the thickness of Sb2S3 porous layer and Sb2S3 fine grain layer, and B is the thickness of Sb2S3 fine grain layer. As a result, photosensitivity had a peak value at the thickness ratio (B/A) of 60%.

• 대한한방부인과학회지
• /
• 제22권1호
• /
• pp.110-124
• /
• 2009

Purpose: This study was performed to evaluate anti-thrombotic effect of Jogantanggagambang extract (JGTG). Methods: Blood flow rate through the regular volume of glass tube after the blood was diluted five times with ACD solution. Antithrombotic effect was calculated as a percentage of the experimental animal figure protected from the paralysis of hind legs or death of the mouse that was caused from the administration of platelet aggregation regent. Results: 1. JGTG inhibited the platelet aggregation induced by ADP, epinephrine, collagen and arachidonic acid as compared with the control group. 2. JGTG inhibited pulmonary embolism induced by collagen and epinephrine (inhibitory rate is 37.5%). 3. JGTG increased platelet number and fibrinogen amount significantly and also JGTG shortened PT and APTT significantly as compared with the control group in thrombus model induced by dextran. 4. JGTG increased blood flow rate significantly as compared with the control group in vivo. Conclusion: These results suggest that JGTG can be used for treating various female diseases caused by thrombosis.

• 대한한방부인과학회지
• /
• 제22권1호
• /
• pp.79-94
• /
• 2009

Purpose: This study was performed to evaluate anti-thrombotic effect of Cheongyeoljohyeoltangkamibang extract (CYJHT). Methods: Blood flow rate through the regular volume of glass tube after the blood was diluted five times with ACD soulution. Antithrombotic effect was calculated as a percentage of the experimental animal figure protected from the paralysis of hind legs or death of the mouse that is caused from the administration of platelet aggregation regent. Results: 1. CYJHT inhibited the platelet aggregation induced by ADP, epinephrine, collagen and arachidonic acid as compared with the control group. 2. CYJHT inhibited pulmonary embolism induced by collagen and epinephrine (inhibitory rate is 50%). 3. CYJHT increased platelet number and fibrinogen amount significantly and also CYJHT shortened PT and APTT significantly as compared with the control group in thrombus model induced by dextran. 4. CYJHT increased blood flow rate insignificantly as compared with the control group in vivo. Conclusion: These results suggest that CYJHT can be useful in treating various female diseases caused by thrombosis, such as menstrual pain, menstrual disorder and so on.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.538-543
• /
• 2008

나노급 다이아몬드는 최근 폭발법이나 증착법에 의한 신공정으로 100 nm 이하의 분말형태의 제조가 가능하다. 나노급 다이아몬드의 소결을 이용하면 이상적인 연마기기의 제작이 가능하다. 이러한 나노급 다이아몬드의 소결 공정에서 생기는 비이상적인 나노결정의 결정립성장과 다이아몬드 결합장애를 방지하기 위해서 나노급 무기물을 균일하게 코팅하는 공정개발이 필요하다. 본 연구에서는 나노급 다이아몬드의 소결 특성을 향상시키기 위해서 ALD(atomic layer deposition)을 이용하여 진공에서 $20{\sim}30\;nm$ 두께의 ZnO 박막을 코팅해 보았다. 나노급 다이아몬드 분말 전면에 경제적으로 ZnO ALD를 위해서 기존의 기계적 진동효과 또는 전용 fluidized bed reactor를 대치하여 새로이 20 mm 석영튜브 안에 다이아몬드 분말을 넣고 다공성 유리필터로 막은 후 펄스와 퍼지 공정시의 압력에 의한 다이아몬드의 부유를 이용한 변형된 fluidized bed 공정을 채용하였다. 다공성 유리필터로 양쪽이 막힌 석영튜브 안에 전구체 DEZn (diethylzinc : $C_4H_{10}Zn$)와 반응기체 $H_2O$를 사용하여 ZnO 박막을 캐니스터 온도 $10^{\circ}C$에서 원자층증착하였다. 공정 순서 및 반응물질 주입 시간은 DEZn pulse-0.1초, DEZn purge-20초, $H_2O$ pulse-0.1초, $H_2O$ purge-40초와 같이 설정하였으며, 이 네 단계를 1 cycle로 정의하여 100 cycle 반복 실시하였다. 다이아몬드 분말과 ZnO 박막이 증착된 다이아몬드 분말의 미세구조를 확인하기 위하여 투과전자현미경 (transmission electron microscope)을 이용하였다. TEM 측정결과, ALD 증착 전 나노급 다이아몬드 분말의 직경이 약 $70{\sim}120\;nm$이었고 사면체, 육면체 등의 다양한 형태를 보임을 확인하였다. ZnO 박막이 ALD코팅된 다이아몬드 분말의 직경은 약 $90{\sim}150\;nm$이었고, 다이아몬드 분말과 ZnO의 명암차이에 의해 약 $20{\sim}30\;nm$ 두께의 균일한 ZnO 박막이 다각형 형태의 다이아몬드 파우더 표면에 성공적으로 증착되었음을 확인하였다.

• 한국산림과학회지
• /
• 제79권2호
• /
• pp.115-126
• /
• 1990

본(本) 연구(硏究)는 두 지역간(地域間)의 솔잎혹파리에 관한 서로 다른 유충(幼蟲)의 주광성(走光性), 우화율(羽化率), 성비(性比), 그리고 충영형성율(蟲癭形成率)을 찾고자 수행(遂行)하였다. 북쪽에서는 피해(被害)가 가장 심한 구성성분(構城成分)을 남쪽에서는 최초(最初)의 발생지(發生地)였던 무안지역(務安地域)을 선택, 이 두 지역(地域)에서 가져온 유충(幼蟲)을 원광대학교(圓光大學校) 곤충학(昆蟲學) 실험실(實驗室)에 옮겨 월동(越冬)을 시켰다. (1) 우집단간(雨集團間) 성숙유충(成熟幼蟲)의 크기에는 차이(差異)가 인정(認定)되지 않았고, (2) 주광성(走光性)에 있어서는 무안집단(務安集團)이 구성집단(構成集團)보다 높은 조도(照度)와 온도(溫度)에 있어서 더 민감(敏感)한 반응(反應)을 보였다. (3) 우화량(羽化量)에 있어서는 무안집단(務安集團)이 구성집단(構成集團)의 그것에 비해서 3배(倍)가량 높았으며, (4) 우화기간(羽化其間)에도 차이(差異)가 인정(認定)되었다. (5) 충영형성율(蟲癭形成率)은 두 집단간(集團間)에 큰 차이(差異)가 없었다. (6) 성별우화수(性別羽化數)에 있어서는 두 집단(集團) 모두 자충(雌蟲)이 웅충(雄蟲)에 비해서 훨씬 더 높게 나타났다. (7) 솔잎혹파리 기생봉류(寄生蜂類)에 대한 관찰내용(觀察內容)이 설명(說明)되었고, (8) 두 집단(集團)의 이질성(異質性)의 일단(一端)이 밝혀진 것으로 사료(思料)된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.42.2-42.2
• /
• 2010

Transparent conducting oxides (TCOs) are of significant importance for their applications in various devices, such as light-emitting diodes, thin-film solar cells, organic light-emitting diodes, liquid crystal displays, and so on. In order for TCOs to contribute to the performance improvement of these devices, TCOs should have high transmittance and good electrical properties simultaneously. Sn-doped $In_2O_3$ (ITO) is the most commonly used TCO. However, indium is toxic and scarce in nature. Thus, ZnO has attracted a lot of attention because of the possibility for replacing ITO. In particular, group III impurity-doped ZnO showed the optoelectronic properties comparable to those of ITO electrodes. Al-doped ZnO exhibited the best performance among various doped ZnO films because of the high substitutional doping efficiency. However, in order for the Al-doped ZnO to replace ITO in electronic devices, their electrical and optical properties should further significantly be improved. In this connection, different ways such as a variation of deposition conditions, different deposition techniques, and post-deposition annealing processes have been investigated so far. Among the deposition methods, RF magnetron sputtering has been extensively used because of the easiness in controlling deposition parameters and its fast deposition rate. In addition, when combined with post-deposition annealing in a reducing ambient, the optoelectronic properties of Al-doped ZnO films were found to be further improved. In this presentation, we deposited Al-doped ZnO (ZnO:$Al_2O_3$ = 98:2 wt%) thin films on the glass and sapphire substrates using RF magnetron sputtering as a function of substrate temperature. In addition, the ZnO samples were annealed in different conditions, e.g., rapid thermal annealing (RTA) at $900^{\circ}C$ in $N_2$ ambient for 1 min, tube-furnace annealing at $500^{\circ}C$ in $N_2:H_2$=9:1 gas flow for 1 hour, or RTA combined with tube-furnace annealing. It is found that the mobilities and carrier concentrations of the samples are dependent on growth temperature followed by one of three subsequent post-deposition annealing conditions.

• Korean Chemical Engineering Research
• /
• 제44권5호
• /
• pp.444-452
• /
• 2006

298.15 K 및 1 atm에서 2성분계 {1,2-dichloropropane+2-(2-methoxyethoxy)ethanol} 및 {1,2-dichloropropane+2-(2-ethoxyethoxy)ethanol}에 대한 과잉몰부피와 과잉몰엔탈피를 측정하였다. 과잉몰부피를 측정하기 위한 밀도는 vibrating glass-tube 방식의 densimeter를 이용하였고, 과잉몰엔탈피는 flow mixing 형의 isothermal microcalorimeter를 이용하였다. 측정한 과잉몰부피 및 과잉몰엔탈피는 조성과 상관지어 모두 S자형을 나타내었다. 초기 2-(2-alkoxyethoxy)ethanol 의 강한 자체 회합현상으로 음의 편차를 나타내며, 할로겐화탄화수소 분자의 증가에 따라 2-(2-alkoxyethoxy)ethanol 분자간의 수소결합을 끊기 위한 에너지가 상대적 더 많이 필요함을 보여주고 있다. 실험으로부터 얻어진 $V^E_m$ 및 $H^E_m$ data는 Nelder-Mead의 simplex pattern search method를 이용하여 Redlich-Kister 다항식에 접합(fitting)하였고, Wilson, NRTL 및 UNIQUAC model을 이용하여 $V^E_m$ data와 조성과의 상관관계를 조사하였다.