• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.3 s.180
• /
• pp.76-85
• /
• 2006

In the manufacture of liquid crystal display devices, there is a strong demand for contactless glass panel handling devices that can manipulate a glass panel without contaminating or damaging it. To fulfill this requirement, an electrostatic transportation device for glass panels is proposed. This device can directly drive a glass panel and simultaneously provide contactless suspension by electrostatic forces. To accomplish these two functions, a feedback control strategy and the operational principle of an electrostatic induction motor are utilized. The stator possesses electrodes which exert electrostatic farces on the glass panel and are divided into a part responsible for suspension and one for transportation. To accomplish dynamic stability and a relatively fast suspension initiation time, the structure of the electrode for suspension possesses many boundaries over which potential differences are formed. In this paper, an electrode pattern suitable for the suspension of glass panels is described, followed by the structure of the transportation device and its operational principle. Experimental results show that the glass panel has been transported with a speed of approximately 25.6 mm/s while being suspended stably at a gap length of 0.3 mm.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.866-873
• /
• 2000

Reinforced concrete structure can be strengthened by glass fiber reinforced plastic thin panels. The GFRP-Thin Panels are manufactured by pressing form and their application technique are similar to steel plates. The use of FGRP-Thin Panels presents several advantages. The advantages of this structural system are the case of application, the elimination of joint and corrosion at the epoxy-panel interface. This paper introduces the method of manufacturing about GFRP-Thin Panels, mechanical properties and the application of reinforced concrete structures.

• Structural Engineering and Mechanics
• /
• v.63 no.2
• /
• pp.217-223
• /
• 2017

Glass fiber reinforced gypsum panels (GFRG) are hollow panels made from modified gypsum plaster and reinforced with chopped glass fibers. The hollow cores of panels can be filled with in-situ concrete/reinforced concrete or insulation material to increase the structural strength or the thermal insulation, respectively. GFRG panels are unfilled when used as partition walls. As load bearing walls, the panels are filled with M 20 grade concrete (reinforced concrete filling) in order to resist the gravity and lateral loads. The study was conducted in two stages: First stage involves formulation of the alternate light weight mix by conducting experimental investigations to obtain the optimum combination of phosphogypsum and shredded thermocol. In the second stage the alternate mixes are filled in GFRG panels and experimental investigations are conducted to compare the performance against panels filled with conventional M 20 mix.

• Transactions of the Society of Information Storage Systems
• /
• v.10 no.2
• /
• pp.39-44
• /
• 2014

LCD panels are used widely in all sorts of devices. Since glass is the main material used to make the panels, scratch resistance is an important issue in acquiring high quality LCD panels. In this work the wear behaviors of three types of commercially available LCD panel glasses were investigated. A pin-on-reciprocating tribotester was used to perform the wear tests using the glass specimens against a stainless steel ball. The hardness of the specimens was initially obtained. It was shown that the wear amount varied with respect to the applied load as well as the type of glass. The wear pattern of the glass specimen was also characterized using confocal microscopy. It is expected that the results of this work will aid in improving the tribological properties of LCD panel glass.

• Steel and Composite Structures
• /
• v.22 no.6
• /
• pp.1445-1463
• /
• 2016

The effects of moisture and temperature on buckling of laminated composite cylindrical shell panels are investigated both numerically and experimentally. A quadratic isoparametric eight-noded shell element is used in the present analysis. First order shear deformation theory is used in the present finite element formulation for buckling analysis of shell panels subjected to hygrothermal loading. A program is developed using MATLAB for parametric study on the buckling of shell panels under hygrothermal field. Benchmark results on the critical loads of hygrothermally treated woven fiber glass/epoxy laminated composite cylindrical shell panels are obtained experimentally by using universal testing machine INSTRON 8862. The effects of curvature, lamination sequences, number of layers and aspect ratios on buckling of laminated composite cylindrical curved panels subjected to hygrothermal loading are considered. The results are presented showing the reduction in buckling load of laminated composite shells with the increase in temperature and moisture concentrations.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.2
• /
• pp.77-84
• /
• 2023

As the installation of solar panel accelerates, so does the number of solar panels reaching their end-of-life (EOL). However, the EOL solar panels is becoming a concern, as they contain potentially hazardous materials and are not easily recycled. Coping strategies such as effective collection, disposal, and recycling methods will be important to manage the growing number of EOL solar panels in the coming years.Therefore, many studies have focused on the development of EOL solar panel recycling technology. One recycling technology for EOL solar panels applicable to the construction field is the application of extracted tempered glass from EOL solar panels as construction materials. This study summarized the EOL solar panel disassembly technology and evaluated the mechanical properties of mortar using extracted tempered glass as fine aggregate. The results showed that when tempered glass was used as a fine aggregate in mortar, the compressive strength, flexural strength, and macro pores in the 1-3 ㎛ with 200-300 ㎛ range were affected, regardless of the disassembly technology of EOL solar panels. Especially, we found that the mechanical performance of mortar using chemically treated tempered glass was noticeably decreased due to changes in the chemical composition of the extracted tempered glass resulting from the removal of K₂O and CuO due to chemical reactions. Meanwhile, it was found that when fly ash was used as a binder, the reduction of mechanical performance could be alleviated.

• Journal of the Korean Solar Energy Society
• /
• v.22 no.4
• /
• pp.62-67
• /
• 2002

Energy conversion soda-lime-silica glasses doped with Eu3+ were produced and they were used to build small scale modules of $100\times100cm$ simulating the roof of glass house with which the rearing state of a small number of young and grown vegetables was observed. The vegetables selected for the study were eggplant, kale, and pimento. The width and length of their leaves along with the photosynthesized ability and chlorophyl content were measured to observe the growing state of the vegetables in the given periods of time. It was found that the vegetables grown under the photo-conversion glass made panels had higher values of the leaf width and length by 5 to 30% than them under the commercially available ordinary glass panels depending on the kind of vegetables. The photosynthesized abilities were also shown much higher for the vegetables under the conversion glass panels than for the non-conversion ones.

• Journal of Information Display
• /
• v.5 no.3
• /
• pp.25-29
• /
• 2004

Effects of additing various types of ceramic fillers to the BZB-based glass on the thermo-chemical stability, optical reflectance, and mechanical properties were investigated. The glass system demonstrated the feasibility to host various types of ceramic fillers to form micro-composites at the processing temperature suitable for PDP systems. The optical reflectance and mechanical strength of the filler-glass composites were improved as compared to the glass itself. These results demonstrate the feasibility of applying the Pb-free BZB-based glass system as a matrix for employing various types of crystalline ceramic fillers to be used as barrier rib materials in plasma display panels.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.755-761
• /
• 2009

The major advantage of transparent materials over traditional materials in noise barriers is aesthetics. The transparent panel materials such as clear plastic or glass are an ideal way of reducing or virtually eliminating the visual impact of a noise barrier. With the use of transparent materials, the drivers' view of the roadside and the sunlight penetration to the highway would not be blocked. With the use of transparent materials, the highway and barrier appear less imposing. Korean Industrial Standards for soundproof panels have been established. But, transparent soundproof panels are not included in this standards. And, some specifications provide only a few basic characteristics for transparent soundproof panels. To develop guidelines on quality criteria for transparent soundproof panel, their mechanical properties such as wind load resistance, safety under impact, and abrasion resistance were experimentally investigated.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.6
• /
• pp.535-550
• /
• 2016

Objective: To enhance user experience of the product by using "wow" materials and parts, a framework for participatory emotional design and evaluation was proposed and validated through a case study in this paper. Background: Customers in recent days value a product which provides new feeling and images they want to get while interacting with it beyond its function, quality, and usability. Since the product consists of various parts and materials, "wow" materials and parts which can affect the customer's feeling and emotions are the essential components for changing the user experience. Method: A framework for participatory and human sensibility ergonomic design was considered and applied on developing the aesthetically and emotionally affecting glass panels of changing colors. Design experts defined a target market for this multicolor glass panels and modified the existing designing goal. Constraints for this design modification were identified by market trend research and consulting with the company which owns the technology for checking out its feasibility. The company developed and provided prototype samples as well as their competing materials. Quantitative and qualitative evaluation of the emotional quality was conducted to validate whether the design goal was achieved successfully. Results: The target market for the developing materials was defined as finishing for the buildings. The designing goal was set as to feed new visual sensation of clean and colorful images. The emotional quality of two different types of multicolor glass panels and an ordinary unicolor panel were evaluated quantitatively with semantic differential method. Results showed that the emotion of the subjects for the multicolor glass panels can be abstracted into two dimensions; named 'colorfulness' and 'harmony'. It was found that the developed samples got higher scores in emotional quality for both dimensions compared to the ordinary one. Age was found to be a significant factor for evaluating the emotional quality of colorfulness. Conclusion and Applications: The proposed framework is a valid approach for enhancing the user experience of the product by participatory design of emotional materials and parts. This framework can be applied easily on the emotional design and evaluation of different materials and components.