• 제목/요약/키워드: Glass Optical Fiber

검색결과 134건 처리시간 0.03초

광섬유 TR-EFPI 센서를 이용한 GFRP 직교 적층판의 변형률 해석 (Strain Analysis in GFRP Cross-Ply Laminates Using TR-EFPI Optical Fiber Sensor)

  • 우성충;최낙삼;권일범
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2003년도 추계학술발표대회 논문집
    • /
    • pp.150-153
    • /
    • 2003
  • Longitudinal strains({$varepsilon}_x$) of the core and skin layers in glass fiber reinforced plastic(GFRP) cross-ply composite laminates have been studied using the embedded optical fiber sensor of totally-reflected extrinsic Fabry-Perot interferometer(TR-EFPI). Foil-type strain gauges bonded on both the upper and lower surfaces were used for the measurement of the surface strains. Both TR-EFPI sensor and strain gauge bonded on the specimen surface showed excellent agreement within -0.0086 ~ +0.0302% strain. It was shown that values of {$varepsilon}_x$ in the interior of the surface layer and the core layer measured by embedded TR-EFPI sensor was significantly higher than that of the specimen surface measured by strain gauges. The experimental results were ascertained with finite element analysis. Embedded TR-EFPI optical fiber sensor could measure accurately the internal strains which were different from the surface.

  • PDF

유리섬유/알루미늄 혼합 적층판의 파괴과정과 음향방출 특성 (Acoustic Emission Characteristics during fracture Process of Glass Fiber/Aluminum Hybrid Laminates)

  • 우성충;최낙삼
    • 비파괴검사학회지
    • /
    • 제25권4호
    • /
    • pp.274-286
    • /
    • 2005
  • 본 연구에서는 편측노치를 갖는 단일 hi판 및 유리섬유/알루미늄 혼합 적층판에 대해 인장하중하의 파괴거동에 따른 음향방출(AE) 특성을 살펴보았다. 단일 알루미늄의 파괴시에 발생하는 AE신호는 저주파수 대역을 갖는 신호와 고주파수 대역을 갖는 신호의 2가지 형태로 분류될 수 있었다. 고주파수 대역의 AE는 0.45mm 변위 보다 큰 후반부 하중단계에서 주로 검출되었다. 유리섬유/알루미늄 혼합 적층판의 경우에는, 고진폭의 긴 유지시간의 신호가 FFT 주파수 해석에 의거하여 거시적인 균열진전이나 A1층과 섬유층 사이의 층간분리에 해당하는 신호로 추정되었다. 위와 같은 AE신호의 해석결과와 광학현미경 및 초음파 스캔에 의한 파괴관찰에 의거하여 섬유층 배향에 따라 상이한 섬유/알루미늄 적층판의 파괴거동과 관련된 AE특성을 규명하였다.

무기 필러가 유연기판용 폴리에틸렌나프탈레이트 필름 치수안정성에 미치는 영향 (Effect of Inorganic Fillers on the Dimensional Stability of Poly(ethylene naphthalate) Film as a Flexible Substrate)

  • 김종화;김홍석;강호종
    • 폴리머
    • /
    • 제36권6호
    • /
    • pp.733-738
    • /
    • 2012
  • 광전소자용 유연기판으로 사용되는 폴리에틸렌나프탈레이트 필름의 치수안정성 향상을 위하여 첨가된 유리 비드와 유리 섬유가 필름의 열팽창계수와 광투과도에 미치는 영향을 살펴보았다. 첨가된 무기 필러의 함량이 증가할수록 열팽창계수와 광투과도가 감소함을 알 수 있었다. 무기 필러의 크기, 입도 분포 또한 유연기판의 치수안정성과 광투과도에 영향을 미치는 주요한 요인임을 확인할 수 있었다. 본 연구 결과, 유연기판으로 사용 가능한 85% 이상의 광투과도를 유지하면서 폴리에틸렌나프탈레이트의 고유 치수안전성을 50% 이상 감소시키는 무기 필러의 함량은 5 wt% 내외임을 알 수 있었다.

광압력 센서의 설계 및 특성 (Design and characteristics of a fiber-optic pressure sensor)

  • 김영수;김요희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 추계학술대회 논문집 학회본부
    • /
    • pp.508-510
    • /
    • 1995
  • A fiber-optic pressure sensor is fabricated with a photoelastic glass material. To remove the influence of external pertubation along the optical fiber, a new referencing technique is proposed by using two light sources. LED with 870nm wavelength is used as light source for reference signal, and LED with 660nm wavelength is used as light source for modulation signal. The fiber-optic pressure sensor system shows good linearity within the pressure range of 0 to 5 $kg/cm^2$.

  • PDF

광강도형 광섬유 진동센서를 이용한 진동감지 및 충격위치 측정 (Vibration Sensing and Impact Location Measurement Using Intensity-Based Optical Fiber Vibration Sensor)

  • 양유창;황운봉;박현철;한경섭
    • Composites Research
    • /
    • 제13권5호
    • /
    • pp.1-9
    • /
    • 2000
  • 광강도형 광섬유 진동센서를 이용한 구조물의 진동감지 및 판에서의 충격위치 검출에 관한 연구가 수행되었다. 광섬유 진동센서는 유리 모세관의 내부에 광섬유의 클래딩 부분이 서로 마주보게 하여 제작되며 그 중 한 쪽은 외팔보 형태이다. 진동이 센서에 가해지면 센서 내부의 외팔보가 진동하게 되고 그에 따라 맞은편 광섬유로 전해지는 빛의 강도가 변화하게 된다. 진동감지 실험을 위해 광섬유 진동센서를 복합재료 보의 표면에 부착하고 자유 진동 및 강제 진동에 대한 신호를 취득하였다. 충격 위치 검출에 관한 실험은 아크릴 판에 대하여 알려진 위치에 네 개의 센서를 표면에 부착하고 진동의 도달 시간을 FFT를 이용하여 측정하였다. 충격위치는 이러한 시간차이를 이용하여 계산되어졌다. 광섬유 진동센서는 상용센서인 갭센서와 동일하게 구조물의 진동을 감지하였으며 판에서의 충격위치를 비교적 정확히 측정하였다.

  • PDF

Chirped 회절격자를 이용한 집적형 파장분할 다중화기 제작 및 특성 측정 (Fabrication and characterization of integrated optic wavelength demultiplexer using a chirped grating)

  • 서만수
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
    • /
    • pp.232-236
    • /
    • 1990
  • Optical waveguide was fabricated in the soda lime glass substrate using rapid thermal method. A chirped grating having period variation of 0.41 - 0.51${\mu}{\textrm}{m}$ on this waveguide for WDM was made. And then, arranging input and output optical fiber, wavelength division multiplexer with 5 channels in short wavelength region was realized. Experiment result of this WDM showed that wavelength spacing, 3 dB bandwidth, insertion loss and crosstalk were 5nm, 4nm, 40dB and less than -10dB, respectively.

  • PDF

Fiber Optic Smart Monitoring of Concrete Beam Retrofitted by Carbon and Glass Sheets

  • 김기수
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
    • /
    • pp.486-489
    • /
    • 2004
  • In this paper, we try to detect the peel out effect and find the strain difference between the main structure and retrofitting patch material when they separate from each other. In the experiment, two fiber optic Bragg grating sensors are applied to the main concrete structure and the patching material separately at the same position. The sensors show coincident behaviors at the initial loading, but different behaviors after a certain load. The test results show the possibility of optical fiber sensor monitoring of beam structures retrofitted by the composite patches.

  • PDF

MCVD법을 이용한 광섬유 모재의 제작 (Fabrication of Optical Fiber Preform by MCVD Method)

  • 이기완;홍봉식
    • 한국통신학회논문지
    • /
    • 제14권4호
    • /
    • pp.307-320
    • /
    • 1989
  • 본 논문은 모재 제작을 위한 Modified Chemical Vapor Deposition(MCVD) 장치의 새로운 설계를 제안하였다. MCVD 공정의 기본 장치로는 선반장치와 원료가스공급 장치가 포함되고, 언덕형 광섬유 설계, 공정의 특성 및 MCVD 모재의 굴정율 형태를 측정하는 실험장치를 각기 실현하였다. 연구결과, 중심부 딥(dip)이나 범프(bump) 가 보이지 않는 이상적 언덕형 굴절율 광섬유 모재를 얻었다.

  • PDF

불화 유리의 냉각 속도 효과 (Cooling Speed Effects of Fluoride Glasses)

  • 류선윤
    • 한국세라믹학회지
    • /
    • 제32권2호
    • /
    • pp.183-188
    • /
    • 1995
  • The properties of the glasses are not dominantly dependent on the chemical composition, temperature, and pressure but also on the thermal history. For example, electrical, thermal, optical, and mechanical properties are all known to be strongly dependent on the thermal history. Fluoride glasses have received a great deal of attention as candidate materials for an infra-red transmitting medium. A series of fluoride glasses and fibers were prepared under a nitrogen atmosphere. Thermal history effects of the fluoride glass fibers associated with the fast cooling rate employed during the fiber drawing process were discussed in terms of the glass temperatures and the fictive temperatures on the basis of the results obtained from the Differential Scanning Calorimeter (DSC) measurements of the fiber and bulk forms of the same chemical composition.

  • PDF

미소 교류 자기장 측정을 위한 Mach-Zehnder 광섬유 간섭계 자기센서 특성분석 (Fiber-optic Mach-Zehnder Interferometer for the Detection of Small AC Magnetic Field)

  • 김대연;안준태;공홍진;김병윤
    • 한국광학회지
    • /
    • 제2권3호
    • /
    • pp.139-148
    • /
    • 1991
  • 광섬유를 사용하여 미소 교류자기장 (200Hz-2kHz) 감지를 위한 광섬유 간섭계 자기센서시스템을 구성하였다. 자왜효과(magnetostriction effect)가 큰 비정질 metallic glass(2605SC)를 광섬유에 부착하여 자기장 감지부를 제작하고 방향성 결합기 metallic glass(2605SC)를 광섬유에 부착하여 자기장 감지부를 제작하고 방향성 결합기(directional coupler)를 사용한 광섬유 일체식(all-fiber type)으로 Mach-Zehnder 간섭계를 구성하여 외부 자기장의 변화를 간섭계의 위상변화로 변환시켜 그 크기를 측정하였다. 온도변화, 진동 등 주위환경에서 오는 불규칙한 신호에 의한 간섭계의 신호소멸(signal fading) 문제는 능동 위상추적방법(active phase tracking method)으로 간섭계의 기준 광통로(reference arm)에 위치한 위상 변조기에 보상신호를 되먹임으로써, 직각조건(quadrature condition)을 이루어 안정시켰다. 측정 결과 metallic glass의 주파수 반응특성은 900Hz-2kHz 대역에서 거의 비슷한 경향을 보였으며 최대 감도를 나타내는 직류 바이어스 자기장은 3.5 Oe 였다. 미소 교류자기장에 대한 간섭계의 출력은 $\pm$0.5 Oe 범위 안에서 좋은 선형성을 보였다. 1 kHz 교류자기장에 대한 scale factor S는 8.0 rad/Oe 이었으며 최소감지자기장은 $3X10^{-6} Oe/\sqrt{Hz}$(1Hz detection bandwidth)이었다.

  • PDF