• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.43-51
• /
• 2008

This study examines shear capacity performance and structural characteristics of reinforced concrete beam using carbon fiber sheet(CFS), g)ass fiber sheet(GFS), glass fiber steel plate(GSP) and carbon fiber bar CB) which are reinforcing materials for reinforced concrete beam in order to produce similar condition to repair and reinforce actual structure and aims to provide data available In designing and constructing reinforced concrete structures under the structural damage. This study obtains the following conclusions. After considering the shear experiment results. it was indicated that the CB reinforced test object was the best in the shear capacity improvement and ductility capacity as it was contained in the concrete and was all operated, Also, GFS reinforced test object indicated the reduced flexural capacity but good shear capacity. GSP reinforced test object had bigger reinforcing strength than other reinforcing test objects. On the other hand, it showed the lowest reinforcement effect as compared section thickness of reinforced material because it showed the bigger relativity a section thickness of reinforced material. If the adherence to the concrete is improved, it will seem to show bigger reinforcement effect.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.173-178
• /
• 2008

This is green roof bottom system which composed by aluminum valve and glass fiber together as major reinforcement, so the cooper sheet can have root proof, and using recycled tire gel-type membrane waterproofing system which dost not contains VOCs. The copper sheet reduce the plants' root growing, so it helpes to maintain the waterproofing layer and stability of root proofing. Gel type membrane waterproofing system can do waterproofing, stress dispersion, and reducing leakage expansion. So those two materials can help each other to make green roof bottom layer would have the stability and durability.

• 콘크리트학회논문집
• /
• 제23권4호
• /
• pp.405-411
• /
• 2011

철근콘크리트 구조물의 보강에 자주 사용하는 탄소 섬유나 유리 섬유 대신에 이 두 가지 섬유를 동시에 사용하여 하이브리드 효과를 얻기 위한 연구를 시도하였다. 하이브리드 효과를 얻기 위해서는 탄소 섬유와 유리 섬유를 적절한 비율로 조합해야 되며, 이러한 비율로 제작된 실험체를 이용하여 하이브리드 FRP 직접 인장 실험을 수행할 수 있다. 하이브리드 FRP 실험체는 직조된 섬유 시트를 이용하는 현장과 다르게, 섬유를 직접 조합해야 하는 이유로 작업이 쉽지 않다. 따라서 이 연구에서는 고강도 탄소 섬유와 E형 유리 섬유의 조합에 따른 1축 직접 인장 실험체의 제작 방법을 제안하여 실험을 통하여 하이브리드 효과를 분석하였다. 하이브리드 FRP로 가장 적합한 섬유 조합은 연성 지수, 탄성계수 및 응력-변형률 곡선을 비교한 결과 연성 K형 에폭시를 사용한 유리 섬유 : 탄소 섬유 = 9 : 1(체적비)가 가장 적합한 것으로 평가되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권5호
• /
• pp.685-695
• /
• 2020

The connection performance between cross-laminated timber (CLT) walls and support has the greatest effect on the horizontal shear strength. In this study, the horizontal shear performance of CLT walls with reinforced connection systems was evaluated. The reinforcements of metal bracket connections in the CLT connection system was made by attaching glass fiber-based reinforcement to the connection zone of a CLT core lamina. Three types of glass fiber-based reinforcement were used: glass fiber sheet (GS), glass fiber cloth (GT) and fiber cloth plastic (GTS). The horizontal shear strength of the fabricated wall specimens was compared and evaluated through monotonic and cyclic tests. The test results showed that the resistance performance of the reinforced CLT walls to a horizontal load based on a monotonic test did not improve significantly. The residual and yield strengths under the cyclic loading test were 38 and 18% higher, respectively, while the ductility ratio was 38% higher than that of the unreinforced CLT wall. The glass fiber-based reinforcement of the CLT connection showed the possibility of improving the horizontal shear strength performance under a cyclic load, and presented the research direction for the application of real-scale CLT walls.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권1호
• /
• pp.231-237
• /
• 2004

조적조 건축물은 작은 인장력과 연성능력으로 인해 지진발생시 심각한 피해상황을 나타내고 있다. 국외의 경우 조적조 건축물에 대한 여러 가지 보강방법이 사용되고 있으나, 국내의 경우 여러 가지 제약에 의하여 유리섬유보강방법을 사용하는 것이 적절하다. 본 논문에서는 유리섬유보강을 통한 지진피해를 입은 조적조 건축물의 내진성능에 관해 평가하였다. 실험결과 유리섬유보강 실험체의 최대 밑면전단력과 변형이 현저하게 증가하였다. 실험결과 값과 기존 전단내력식을 비교하여 유리섬유보강 실험체의 전단내력식을 제안하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.274-280
• /
• 2008

To investigate the flexural behavior of real size RC beams strengthened with glass fiber sheets, 9 strengthened beams of real size are experimented and the results are compared with those of existing experimental studies. Experiments are considered glass fiber sheets, the number of fiber sheets, and the existence of U-wrap. By the results of experiments, the failure behavior and crack types of real size RC beams are almost equal to those of the small size RC beams, and the debonding and not the concrete cover delamination are occurred. It can be found from the load-deflection curves that as the number of fiber sheets is increased, the ductility of real size RC beam is more decreased than that of the small size RC beam. For the strengthening method with glass fiber sheets of the real size RC beams, it can be confirmed that the finding a solution to the bonding problem is required

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권5호
• /
• pp.163-169
• /
• 2017

비닐용기 등에 주로 사용되는 PET 섬유는 강도는 아주 작은 반면, 변형성능에는 아주 우수하기 때문에 지진 발생시 구조물의 대변형에 효과적으로 저항할 수 있는 보강재료로 사용가능하며, 일본에서는 이미 PET 섬유를 이용한 연구를 진행하고 있는 실정이다. 따라서 본 연구에서는 PET(polyethylene terephthalate) 섬유의 횡구속 효과를 파악하고, PET 섬유의 보강효과와 기존에 사용해왔던 탄소섬유시트 및 유리섬유시트의 보강효과를 비교함으로써 PET 섬유의 현장적용성 여부를 파악하기 위한 것이다. 이를 위해 무근 콘크리트 공시체에 탄소섬유시트와 유리섬유시트 및 PET 섬유 등으로 구분하고 각각에 대해 콘크리트 강도와 보강겹수를 달리하여 실험체 별로 각각 2개씩 동일하게 제작하여 실험을 실시하였다. 실험결과, 탄소섬유시트 및 유리섬유시트로 보강된 실험체는 기존연구결과들과 마찬가지로 시트가 파단된 후 급격한 내력저하로 최종파괴 되었다. 그러나 PET로 보강한 실험체들은 PET 섬유가 파단되지 않고 최대 강도 이후 급격한 내력저하 없이 서서히 감소되면서 최종파괴 되었다. 또한, 탄소섬유시트 및 유리섬유시트로 보강한 실험체에 비해 강도증진 효과는 크지 않았으나, 연성측면에서는 매우 우수하게 나타나 향후 보강재료로 사용할 수 있을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.652-660
• /
• 2015

To study the bearing characteristics of glass fiber reinforced glulam for structural design, bearing strength tests were performed. Bearing loads were applied in the direction parallel to the grains, and the holes were prepared in such a way that the bolts would bear and support all the layers. The yield bearing strengths of the glass fiber reinforced glulam were found to be similar to those of the non-reinforced glulam, and were almost constant regardless of increases in bolt diameter. The ratio of the experimental yield bearing strength to the estimated bearing strength according to the suggested equation of the Korea Building Code and National Design Specification was 0.91~1.03. For the non-reinforced glulam and the sheet glass fiber reinforced plastic glulam, the maximum bearing load was measured according to the splitting fracture of specimens under bolt. The textile glass fiber reinforced glulam underwent only an embedding failure caused by the bearing load. The failure mode of reinforced glulam according to bearing load will influence the failure behavior of bolted connection, and estimating the shear yield strength of the bolted connection of the reinforced glulam is necessary, not only by using the bearing strength characteristics but also using the fracture toughness of the reinforced glulam.

• Structural Engineering and Mechanics
• /
• 제72권3호
• /
• pp.305-312
• /
• 2019

This paper investigates the effect of utilizing vacuum bagging process to enhance the bond behavior between fiber reinforced polymer (FRP) composites and concrete substrate. Sixty specimens were prepared and tested using double-shear bond test. The effect of various parameters such as vacuum, fiber type, and FRP sheet length and width on the bond strength were investigated. The experimental results revealed that utilizing vacuum leads to improve the bond behavior between FRP composites and concrete. Both the ultimate bond forces and the maximum displacements were enhanced when applying the vacuum which leads to reduction in the amount of FRP materials needed to achieve the required bond strength compared with the un-vacuumed specimens. The efficiency of the enhancement in bond behavior due to vacuum highly depends on the fiber type; using carbon fiber showed higher enhancement in the bond strength compared to the glass fiber when vacuum was applied. On the contrary, specimens with glass fiber showed higher enhancement in the maximum slippage compared to specimens with carbon fibers. Utilizing vacuum does not affect the debonding failure modes but lead to increase in the amount of attached concrete on the surface of the debonded FRP sheet.

• Journal of the Korean Wood Science and Technology
• /
• 제42권5호
• /
• pp.571-578
• /
• 2014

As a way of developing wooden joint development, a glass fiber reinforced wood plate was manufactured to replace a steel plate. Also, the fracture toughness was evaluated. Through application to a cantilever-type specimen made of a column and a beam, the moment resistance performance was evaluated. For the fracture toughness specimen of the wood plate, 12 types were manufactured by varying the combination of a main member (veneer and plywood) and reinforcement (glass fiber sheet and glass fiber cloth). The results of the fracture toughness test indicated that the 5% yield load of the specimen using plywood was 18% higher than that of the specimen using veneer, and that the specimen reinforced by inserting glass fiber sheets between testing materials (Type-3-PS) had the highest average 5% yield load 4841 N. Thus, a moment resistance strength test was performed by applying Type-3-PS to a column-beam joint. The results of the test indicated that compared to the specimen using a steel plate and a drift pin (Type-A), the maximum moment ratio of the specimen using a glass fiber reinforced wood plate (Type-3-PS) and a drift pin (Type-B) was 0.79; and that a rupture occurred in the wood plate due to high stiffness of the drift pin. The maximum moment ratio of the specimen using a glass fiber reinforced wood plate (Type-3-PS) and a glass fiber reinforced wooden laminated pin (Type-C) was 0.67, which showed low performance. However, unlike Type-A, a ductile fracture occurred on Type-C, and the load gradually decreased even after the maximum moment.