• Journal of Ginseng Culture
• /
• v.6
• /
• pp.51-79
• /
• 2024

In the 1970s and 1980s, during the nascent phase of ginseng disease research, efforts concentrated on isolating and identifying pathogens. Subsequently, their physiological ecology and pathogenesis characteristics were scrutinized. This led to the establishment of a comprehensive control approach for safeguarding major aerial part diseases like Alternaria blight, anthracnose, and Phytophthora blight, along with underground part diseases such as Rhizoctonia seedling damping-off, Pythium seedling damping-off, and Sclerotinia white rot. In the 1980s, the sunshade was changed from traditional rice straw to polyethylene (PE) net. From 1987 to 1989, focused research aimed at enhancing disease control methods. Notably, the introduction of a four-layer woven P.E. light-shading net minimized rainwater leakage, curbing Alternaria blight occurrence. Since 1990, identification of the bacterial soft stem rot pathogen facilitated the establishment of a flower stem removal method to mitigate outbreaks. Concurrently, efforts were directed towards identifying root rot pathogens causing continuous crop failure, employing soil fumigation and filling methods for sustainable crop land use. In 2000, adapting to rapid climate changes became imperative, prompting modifications and supplements to control methods. New approaches were devised, including a crop protection agent method for Alternaria stem blight triggered by excessive rainfall during sprouting and a control method for gray mold disease. A comprehensive plan to enhance control methods for Rhizoctonia seedling damping-off and Rhizoctonia damping-off was also devised. Over the past 50 years, the initial emphasis was on understanding the causes and control of ginseng diseases, followed by refining established control methods. Drawing on these findings, future ginseng cultivation and disease control methods should be innovatively developed to proactively address evolving factors such as climate fluctuations, diminishing cultivation areas, escalating labor costs, and heightened consumer safety awareness.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.62-62
• /
• 2020

Ginseng is a shade-plant cultivated using shading facilities. However, at too low light levels, root growth is poor, and at high light levels, the destruction of chlorophyll reduces the photosynthesis efficiency due to leaf burn and early fall leaves. The ginseng has a lightsaturation point of 12,000~15,000 lux when grown at 15 to 20℃ and 9,500 lux at 25℃. This study was conducted to select the optimal light intensity of 3-year-old ginseng grown in blue-white film plastic house. The seeds were planted in the blue-white film plastic house with different light receiving rate (March 17, 2020). Between April and September, the average air temperature in the house was 20.4-20.7℃. Average soil temperature was 18.3℃-18.5℃. The chemical properties of the test soil was as follows. The pH level was 7.0-7.4, EC was 0.5-0.6 dS/m, OM was at the levels of 33.6-37.7 g/kg, P₂O₅ was 513.0-590.8 mg/kg, slightly higher than the allowable 400 mg/kg. The amount of light intensity, illuminance, and solar radiation in the blue-white film house was increased as the light-receiving rate increased and the amount of light intensity was found to be 9-14% compared to the open field, 8-13% illuminance and 9-14% solar irradiation respectively. The photosynthesis rate was the lowest at 3.1 µmolCO²/m²/s in the 9% light blue-white plastic house and 4.2 and 4.0 µmolCO²/m²/s in the 12% and 14% light blue-white plastic house, respectively. These results generally indicate that the photosynthesis of plants increases with the amount of light, but the ginseng has a lower light saturation point at high temperatures, and the higher the amount of light, the lower the photosynthetic efficiency. The SPAD (chlorophyll content) value decreased as the increase of light-receiving rate, and was the highest at 32.7 in 9% light blue-white plastic house. Ginseng germination started on April 11 and took 13-15 days to germinate. The overall germination rate was 82.9-85.8%. The plant height and length of stem were long in the 9% light-receiving plastic house. The diameter of stem was thick in the 12-14% light-receiving plastic house. In the 12% and 14% light-receiving plastic house, the length and diameter of taproot was long and thick, so the fresh weight of root per plant was 20 g or more, which was heavier than 16.9 g of the 9% light-receiving plastic house. The disease incidence (Alternaria blight, Gray mold and Damping-off etc.) rate were 0.9-2.7%. The incidence of Sclerotinia rot disease was 7.5-8.4%, and root rot was 0-20.0%. The incidence ratio of rusty root ginseng was 34.4-38.7% level, which was an increase from the previous year's 15% level.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.45-45
• /
• 2019

This experiment was carried out using artificial clay and LED in the plastic film house (irradiation time: 08:00~18:00/day). Seedlings (n = 63 per $3.3m^2$) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity. The average air temperature from April to September was $12.3^{\circ}C$ $-26.0^{\circ}C$ and it was the the highest at $26.0^{\circ}C$ in August. The test area where fluorescent lamp was irradiated tended to be somewhat higher than the LED irradiation area. The chemical properties of the test soil are as follows. pH levels was 5.3~5.5, EC levels 0.45~0.52 dS/m and OM levels 33~37%. The total nitrogen content was 0.35~0.47% and the available $P_2O_5$ contents was 13.7~16.0 mg/kg, which was lower than the suitable level of 70~200 mg/kg. Exchangeable cations K and Mg contents were within acceptable ranges, but the Ca contents was $28{\sim}38cmol^+/kg$ levels higher than the permissible level ($2{\sim}6cmol^+/kg$). Germination of ginseng leaves took 8~9 days and the overall germination rate was 70~75%. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PAR (Photosynthetic Action Radiation) value, illuminance and solar irradiation. Photosynthetic rate was also increased with higher light intensity was investigated at $1.7{\sim}3.2{\mu}mol\;CO_2/m^2/s$. Leaf temperature ($23.7{\sim}24.8^{\circ}C$) by light intensity was the same trend. The growth of aerial parts (plant height etc.) were generally excellent when irradiated with 3 times the light intensity, the growth of the ginseng aerial parts were excellent as follows. The plant height was 42.6 cm, stem length was 25.2 cm, leaf length was 9.6 cm and stem diameter was 5.0 mm. The growth of underground part (root length etc.) was the same, and the root length was 24.4 cm, the tap root length was 6.0 cm, diameter of taproot was 18.2 mm and the fresh root weight was 17.2 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping off occurred 2.2~3.6% and incidence ratio of rusty root ginseng was 14.6~20.7%. Leaf discoloration rate was 13.7~48.9% and increased with increasing light intensity. Ginsenoside content of ginseng by light intensity is under analysis.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.61-61
• /
• 2020

This experiment was carried out using artificial bed soil and LED in the plastic film house(irradiation time: 07:00-17:00/day). Seedlings(n=63 per 3.3 m²) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity(40-160 µmol/m²/s). Average air temperature from April to September according to the light intensity test was 20.4℃-20.9℃. Average artificial bed soil temperature was 20.1℃-21.7℃. The test area where fluorescent lamp was irradiated tended to be somewhat lower than the LED irradiation area. The chemical properties of the test soil was as follows. pH levels was 6.6-6.7, EC levels 0.9-1.3 dS/m and OM levels 30.6-32.0%. The available P₂O₅ contents was 73.3-302.3 mg/kg. Exchangeable cations K and Ca contents were higher than the allowable ranges and mg content was high in the fluorescent lamp treatment. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PPFD(Photosynthetic Photon Flux Density) value, illuminance and solar irradiation. Fluorescent lamp treatment had high illuminance value, but PPFD and solar irradiation were lower than LED intensity 40 µmol/m²/s treatment. The photosynthetic rate increased(2.0-3.8 µmolCO²/m²/s) as the amount of light intensity increased, peaking at 120 µmol/m²/s, and then decreasing. The SPAD (chlorophyll content) value decreased as the amount of light intensity increased, and was the highest at 36.1 in fluorescent lamp treatment. Ginseng germination started on April 5 and took 14-17 days to germinate. The overall germination rate was 68.8-73.6%. The growth of aerial parts(plant height etc.) were generally excellent in the treatment of light intensity of 120-160 µmol/m²/s. The plant height was 41.9 cm, stem length was 24.1 cm, leaf length was 9.8 cm and stem diameter was 5.6 mm. The growth of underground part (root length etc.) was the best in the treatment with 120 µmol/m²/s of light intensity. Due to the root length was long(24.8 cm) and diameter of taproot was thick(18.7 mm), the fresh root weight was the heaviest at 24.8 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping-off caused by Rhizoctonia solani occurred 0.6-1.5% and incidence ratio of rusty root ginseng was 30.8-62.3%. It is believed that the reason for the high incidence of rusty root ginseng is that the amount of field moisture capacity of artificial bed soil is larger than the soil. Leaf discoloration rate was 13.7-32.3%.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.3
• /
• pp.210-216
• /
• 2014

The average and maximum temperature were $29.5^{\circ}C$ and $33.2^{\circ}C$ at 2:00 p.m. respectively, in the plastic-film house covered with shade net, and both of temperature were lower $0.6^{\circ}C$ and $1.3^{\circ}C$ than those of conventional shade. Light transmittance was 14% in the plastic-film house, while 9.9% in conventional shade during growing season from May to October. Withering time of aboveground part was on October 3rd in conventional shade with 60% of withering leaf, while it was on November 10th with 3.7% of withering leaf in the plastic-film house, about 40 days longer survival. The main disease incidence were 15% of anthracnose, 17% of leaf spot, 5% of phytophthora blight and 3% of gray mold in the conventional shade, while 0 ~ 0.1% disease incidence and 95% of emergence rate in the plastic-film house. The growth in the aboveground and underground part of ginseng was totally better, particularly characteristics affecting yield such as root length, main root length and diameter in the plastic-film house. The fresh weight was increased by 128% compared to the conventional shade and harvested roots per $3.3m^2$ were 36 roots in the conventional shade and 58 roots in the plastic-film house and futhermore yield per $3.3m^2$ was increased by 216% compared to the conventional shade. As covering materials, the rice straw in the plastic-film house was excellent. The ginsenoside contents affecting the quality of ginseng were higher in the plastic-film house indicating 0.333% of Rg1, 0.672% of Rb1, 0.730% of Rc and rate of red rusty root was less than 4.0 ~ 6.1%. Above the results, the quality of ginseng grown in the plastic-film house covered with shade net was improved than that of the conventional shade.

• Research in Plant Disease
• /
• v.13 no.3
• /
• pp.170-176
• /
• 2007

Effects of fungicides on the mycelial growth of Botrytis cinerea isolated from ginseng leaves were investigated by an agar dilution method. By using a agar dilution method, it was investigated the effect of fungicides, procymidone, carbendazim and the mixture with both of carbendazim and diethofencarb, on the mycelial growth of Botrytis cinerea isolates, which were isolated from infected leaves of ginseng in 2005 and 2006. With MIC (minimum inhibiton concentration) of procymidone against B. cinerea, pathogens were divided into two groups. While one showed the low MIC between 0.8 and $4.0{\mu}g/ml$, the other showed higher MIC above $20{\mu}g/ml$. In terms of the inhibition ratio of mycelial growth at the indicated concentration of procymidone, isolates of B. cinerea were divided into three groups; the sensitive, the intermediate resistant, and the resistant group. Each group was differentiated by $EC_{50}$; the sensitive group showed below $2.0{\mu}g/ml$, the intermediate resistant group between 2.0 to $5.0{\mu}g/ml$, and resistant group above $5.0{\mu}g/ml$. Compared with the ratio of resistant isolates of B. cinerea in 2005, the ratio in 2006 increased from 19.3% to 27.5%. Furthermore, the average $EC_{50}$ value of them increased from $10.0{\mu}g/ml$ in 2005 to $237.3{\mu}g/ml$ in 2006. The ratio of isolates showing the multiple resistance between procymidone and carbendazim was 40.2%, whereas the ratio was 4.0% showing the multiple resistance in the mixture.

• The Korean Journal of Mycology
• /
• v.23 no.3 s.74
• /
• pp.246-256
• /
• 1995

Phenotypic characteristics, pathogenicity and fungicides resistance of fifty one isolates of Botrytis cinerea obtained from various host plants were observed and determined. The relationships between these characteristics were also investigated on the basis of isolation host plants. The isolates of B. cinerea varied in the capacity of sclerotia formation and sporulation. The pathogenicity of 44 isolates from tomato, cucumber, and strawberry was significantly stronger with 3.2 cm in average diameter of necrotic lesions on cucumber leaves than that of seven isolates from other host plants such as orange, gerbera, ginseng, kiwi, grape, pear and from butter with 1.8 cm in average diameter of necrotic lesions. Benomyl resistance of 12 isolates from tomato plants was much higher with the $EC_{50}$, 562 ppm than that of 19 isolates from various host plants. Diethofencarb resistance, however, of 11 isolates from strawberry plants was highest with the $EC_{50}$, 210 ppm among isolates from other host plants. Polygalacturonase activity varied among isolates in the range of 0 to 103 unit and that of isolates from tomato, cucumber and strawberry was slightly lower than that of isolates from other host plants. No significant relationship between pathogenicity and fungicides resistance, polygalacturonase activity was found among 51 isolates of B. cinerea. Isozyme patterns of polygalacturonase produced from two strongly and weakly pathogenic isolates (FC122, KC6) were slightly different depending upon carbon sources during cultivation.

• The Plant Pathology Journal
• /
• v.33 no.5
• /
• pp.488-498
• /
• 2017

The aim of this study was to identify volatile and agardiffusible antifungal metabolites produced by Bacillus sp. G341 with strong antifungal activity against various phytopathogenic fungi. Strain G341 isolated from four-year-old roots of Korean ginseng with rot symptoms was identified as Bacillus velezensis based on 16S rDNA and gyrA sequences. Strain G341 inhibited mycelial growth of all phytopathogenic fungi tested. In vivo experiment results revealed that n-butanol extract of fermentation broth effectively controlled the development of rice sheath blight, tomato gray mold, tomato late blight, wheat leaf rust, barley powdery mildew, and red pepper anthracnose. Two antifungal compounds were isolated from strain G341 and identified as bacillomycin L and fengycin A by MS/MS analysis. Moreover, volatile compounds emitted from strain G341 were found to be able to inhibit mycelial growth of various phytopathogenic fungi. Based on volatile compound profiles of strain G341 obtained through headspace collection and analysis on GC-MS, dimethylsulfoxide, 1-butanol, and 3-hydroxy-2-butanone (acetoin) were identified. Taken together, these results suggest that B. valezensis G341 can be used as a biocontrol agent for various plant diseases caused by phytopathogenic fungi.

• The Korean Journal of Mycology
• /
• v.24 no.4 s.79
• /
• pp.293-304
• /
• 1996

A bacterial strain, KSl, possessing strong antifungal activity was isolated from soil samples of ginseng fields and identified as Bacillus subtilis. In greenhouse test, the culture filtrate of B. subtilis KS1 showed strong protective effect against several fungal diseases of agricultural plants such as cucumber gray mold and wheat leaf rust. In addition, the crude butanol fraction of the culture filtrate exhibited antagonistic effect against several fungi including plant or human pathogens, such as Botrytis maydis, Chytridium lagenarium and Candida albicans. The antifungal compound, SW1, produced by B. subtilis KS1 was purified through consecutive chromatographic separations on a pep-RPC column and a ${\mu}$ Bondapak $C_{18}$ reverse phase column. Temperature and pH showed little effect on the stability of the compound in the ranges $-20-121^{\circ}C$ and pH 4.0-10.0, respectively. The composition and structural characteristics of SW1 were analysed by HPLC and by $^1H-,\;^1H-^1H-COSY$, NOESY, COSY-NOESY and HOHAHA NMR spectroscopy, respectively, which revealed that the compound belongs to iturin A, a typical cyclic antifungal compound produced by B. subtilis. In contrast to the previously reported iturin A compounds which have one or no $-CH_3$ side chain in the hydrophobic hydrocarbon chain of ${\beta}-amino$ acids, SW1 was shown to have a ${\beta}-amino$ acid containing 12-carbon skeleton with two $-CH_3$ side chains.