• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.412-417
• /
• 2012

Mucopolysaccharidosis (MPS) is a disorder which is caused by the defect of the lysosomal enzyme that is essentially needed for resolution of glycosaminoglycans (GAGs). Metabolite of GAGs will accumulate in the lysosome of cells and will result in the dysfunction of cells, tissues, and organs. Eventually, patients will manifest both mental retardation and physical disorders. In worst cases, mucopolysaccharidosis can cause premature death. The current clinical types have been classified as MPS from type I to type IX according to the defect of certain enzyme. The dental complications have been reported as delay of eruption, enamel hypoplasia, microdontia, malocclusion, condylar defects, gingival hyperplasia and dentigerous cystlike follicle. This clinical report presents the case of a boy with MPS type II, Hunter Syndrome which has various dental complications.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.259-267
• /
• 2008

This in vitro study aimed to investigate the influence of flowable composite lining with different thicknesses on the marginal quality. One hundred twenty cavities, each preparated with proximal boxtype( 3mm of bucco-lingual width, 2mm of mesio-distal depth and gingival margin of 1mm supra-CEJ) were randomly dived into four groups. group I : Tetric ceram filling alone(control group) group II: 0.5mm thickness Tetric flow + Tetric ceram filling group III: 1.5mm thickness Tetric flow + Tetric ceram filling group IV: 2.5mm thickness Tetric flow + Tetric ceram filling The followings are the results: 1. Group II showed significantly less microleakage compared to group I(control group)(p<0.05). 2. There was no statistically significant difference between group III, IV and group I(p>0.05). 3. Group II showed significantly less microleakage compared to group III, IV(p<0.05). 4. There was microleakage more or less in all group. It was concluded that 0.5mm flowable composite lining improved cavity adaptation and marginal sealing.

• The Journal of the Korea Contents Association
• /
• v.16 no.1
• /
• pp.295-307
• /
• 2016

The purpose of this study was to examine the awareness and knowledge of school organizational members about peridontal diseases, their belief in the diseases, attitude and periodontal health in an effort to provide some information on how to ensure successful oral health education and incremental dental care. The subjects in this study were the selected patients who visited school dental clinics. Their ideas of periodontal diseases and periodontal health were analyzed to determine the influential factors. They got a mean of 2.77 in awareness of the epidemiologic characteristics of periodontal diseases, 2.97 in knowledge on the initial symptoms of gingivitis, 2.90 in awareness of the causes of periodontal diseases, 2.95 in awareness of the prevention and treatment of peridontal diseases, and 3.04 in belief in periodontal diseases and attitude. Thus, they had a good understanding and knowledge of periodontal diseases, and they had the right belief and the right attitude as well. They scored relatively lower in several items of periodontal diseases: awareness of tooth loss caused by aging, awareness of the relationship of food to the prevention and occurrence of periodontal diseases, the relationship between toothbrushing time and gingival health, the right toothbrushing method and the right way of dental care.

• The korean journal of orthodontics
• /
• v.26 no.5 s.58
• /
• pp.591-599
• /
• 1996

This study was undertaken to investigate the cytotoxicity of orthodontic wires after doing various treatments to the wires. 018x025 inch Stainless steel(A) and Co-Cr(B) wires were used and each of them were divided into 4 groups. A-1 and B-1 groups were as received state, and A-2 and B-2 groups were heat treated. A-3 and B-3 groups were electropolished after heat treatment, and A-4 and B-4 groups were soldered with Ag-solder. Each group had 3 wires and these were sterilized with Ethylene Oxide gas. We used human gingival fibroblast cell culture and agar overlay technique to investigate the cytotoxicity of each group of wires. The cytotoxicity of wire was assessed using reaction index (zone index/lysis index). The findings of this study were as follows. 1. Both of the stainless steel wire and Co-Cr wire showed no cytotoxicity in as received state. 2. Heat treatment or electropolishing of the wires had no effect on the cytotoxicity of the wires 3. Soldered stainless steel wires showed a little wider zone of discoloration than soldered Co-Cr wires, but the zone index and cytotoxicity(reaction index) was not different. 4. Soldered wires showed moderate cytotoxicity in both of the wires.

• International Journal of Oral Biology
• /
• v.34 no.2
• /
• pp.61-72
• /
• 2009

Chios gum mastic (CGM) is a resin produced from the stem and leaves of Pistiacia lentiscus L var chia, a plant which grows only on Chios Island in Greece. CGM has been used for many centuries as a dietary supplement and folk medicine for stomach and duodenal ulcers in many Mediterranean countries and is known also to induce cell cycle arrest and apoptosis in some cancer cells. In this study, we further investigated the induction and mechanisms underlying the apoptotic response to CGM treatment in the SCC25 human tongue squamous cell carcinoma cell line. The viability of SCC25 cells, human normal keratinocytes (HaCaT cells) and human gingival fibroblasts (HGF-1 cells), and the growth inhibition of SCC25 cells were assessed by MTT assay and clonogenic assay, respectively. Staining with Hoechst and hemacolor dyes and TUNEL assays were employed to detect SCC25 cells undergoing apoptosis. SCC25 cells were treated with CGM, and this was followed by western blotting, immunocytochemistry, confocal microscopy, FACScan flow cytometry, MMP activity and proteasome activity analyses. CGM treatment of SCC25 cells was found to result in a time- and dosedependent decrease in cell viability, a dose-dependent inhibition of cell growth, and apoptotic cell death. Interestingly, CGM showed a remarkable level of cytotoxicity in SCC25 cells but not in normal cells. Tested SCC25 cells also showed several lines of apoptotic manifestation. Taken together, our present findings demonstrate that CGM strongly inhibits cell proliferation by modulating the expression of G1 cell cycle-related proteins and induces apoptosis via the proteasome, mitochondria and caspase cascades in SCC25 cells.

• Korean Journal of Microbiology
• /
• v.48 no.1
• /
• pp.52-56
• /
• 2012

The aim of this study was to evaluate the antimicrobial effect of carvacrol against periodontopathic and cariogenic bacteria and its cytotoxicity in human oral tissue cells. We tested their antibacterial properties against mutans streptococci and five major periodontopathic bacterial species involved in periodontal disease. The antimicrobial activity was evaluated by the minimal inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). The cell viability of carvacrol on normal human gingival fibroblast (NHGF) cells was tested by metyl thiazolyl tetrazolium assay. The data showed that carvacrol had remarkable antimicrobial effect on tested bacteria with a MIC and MBC values ranged from 16 to $128{\mu}g/ml$ and from 32 to $128{\mu}g/ml$, respectively. In cell toxicity studies, carvacrol had significantly decreased cell viability when NHGF cells were treated at $128{\mu}g/ml$. These findings suggest that carvacrol has a strong antimicrobial activity against periodontopathic and cariogenic bacteria. However, in order to use it as a component of gargling solution or toothpaste, its concentration should be below $64{\mu}g/ml$ and other compounds having an antimicrobial activity against periodontopathic and cariogenic bacteria should be used together.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.577-577
• /
• 2001

The lastest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not blown dry but left moist before application of the bonding primer. Ideally, the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during preparation of a restoration. The aim of this study was to evaluate the effect of contamination by hem-ostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were cleaned from soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive paper on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows: Group 1 : Dentin surface was not etched and not contaminated by hemostatic agents. Group2 : Dentin surface was not etched but was contaminated by Astringedent (Ultradent product Inc., Utah, U.S.A.). Group3 : Dentin surface was not etched but was contaminated by Bosmin (Jeil Phann, Korea.). Group4 : Dentin surface was not etched but was contaminated by Epri-dent (Epr Industries, NJ, U.S.A.). Group5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6 : Dentin surface was etched and contaminated by Astringedent. Group7 : Dentin surface was etched and contaminated by Bosmin. Group8 : Dentin surface was etched and contaminated by Epri-dent. Group9 : Dentin surface was contaminated by Astringedent. The contaminated surface was rinsed by water and dried by compressed air. Group10 : Dentin surface was contaminated by Bosmin. The contaminated surface was rinsed by water aud dried by compresfed air. Group 11 : Dentin surface was contaminated by Epri-dent. The contaminated surface was rinsed by water and dried by compresfed air. After surface conditioning, F2000 was applicated on the conditoned dentin surface. The teeth were thermocycled in distilled water at $5^{\circ}C\;and\;55^{\circ}C$ for 1000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the lmife-edge shearing rod of the Universal testing machine(Zwick 020, Germany) running at a cross head speed of 1.0mmimin. There were no significant differences in shear bond strength between groups 1 and group 3 and 4, but group 2 showed significant decrease in shear bond strength compared with group 1. There were no significant differences in shear bond strength between group 5 and group 7 and 8, but group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.493-501
• /
• 2002

This study evaluated the microleakage performance of four self-etcing primer adhesives(Clearfil SE Bond, Clearfil Liner Bond 2, UniFil Bond, and FL Bond) and one self-etching adhesive(Prompt L-Pop). Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were prepared on both buccal and lingual surfaces of 50 extracted human molar teeth. Prepared teeth were randomly divided into five groups and restored using one of five adhesives and composite resins: Prompt L-Pop/Filtek Z 250(Group 1), Clearfil SE Bond/Clearfil AP-X(Group 2), Clearfil Liner Bond 2/Clearfil AP-X(Group 3), UniFil Bond/UniFil F(Group 4), and FL Bond/Filtek Z 250(Group 5). Following one day storage in room temperature water, the restored teeth were thermocycled for 500 cycles between 5$^{\circ}C$ and 55$^{\circ}C$. Marginal microleakage was assessed by dye penetration using 2% methylene blue dye. After 24 hours, the teeth were sectioned longitudinally and evaluated for microleakage under steromicroscope The data were statistically analysed by Kruskal-Wallis Test, Mann-Whitney and Wilcoxon signed ranked tests. The results of this study were as follows ; 1. The microleakges at both enamel and dentinal mal$.$gins were the lowest in group 4. increasing among groups in the following order: group 2, follwed by group 5, follwed by group 1, and the highest in group 3. 2. At the enamel margins, the microleakage of group 3 was significantly higher than those of groups 2. 4 and 5(p<0.05), and also the microleakage of group 1 was statistically higher than those of groups 2 and 5(p<0.05). 3. At the dentinal margins, microleakage of group 3 was signincantly higher than microleakages of groups 1, 2, 4 and 5(p<0.05). 4. Compared with microleakages between the enamel and dentinal margins of each group, groups 1, 4 and 5 at enamel margin and group 2 and group 3 at dentinal margin were higher microleakage. But there was no significant difference between enamel and dentinal microleakages of each group(p>0.05).

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.419-429
• /
• 2000

Prevotella intermedia has been implicated as a potent pathogen in many kinds of periodontal, pulpal and periapical diseases. However, it has been isolated from periodontally healthy adults and from edentulous children as well. The intraspecies heterogeneity of Prevotella intermedia has been demonstrated in early studies and finally Shah & Gharbia confirmed the existence of 2 DNA homology groups and proposed dividing Prevotella intermedia into 2 species, Prevotella intermedia and Prevotella nigrescens. This study was designed to examine the frequency of Prevotella intermedia and Prevotella nigrescens in diseased periodontal pockets and healthy gingival sulcus of Korean people by PCR based on 16s ribosomal DNA sequence. One hundred adults who had adult periodontitis but not taken any periodontal treatment or antibiotics during previous 6 months and 50 adults who had healthy periodontal tissue were selected for this study. The sulcular fluid was collected into VMGA by sterilized paper point and diluted to 1,000 times in anaerobic chamber. $100{\mu}{\ell}$ of sample was cultured in $37^{\circ}C$ for 10 days. Among the bacterial colonies, BPB were selected and cultured in BHI broth and then Prevotella intermedia was identified through Gram staining and biochemical test. Identified Prevotella intermedia was cultured again and centrifuged. DNA was extracted from the pellet using several reagents. PCR was performed by previously designed primer. The results were followed. 1. BPB were isolated from 39 of 100 samples of diseased periodontal pockets(39%). 2. Prevotella intermedia was identified from 24 of 39 BPB samples. 3. Among 24 Prevotella intermedia, 21 were confirmed as Prevotella inter - media(87.5) and 2 were confirmed as Prevotella nigrescens(8.33%). 4. BPB were isolated from 9 of 50 samples of periodontally healthy patients. Among them only two were identified as Prevotella intermedia, that is, one was confirmed as Prevotella intermedia and the other was Prevotella nigrescens.

• Journal of Periodontal and Implant Science
• /
• v.32 no.3
• /
• pp.555-584
• /
• 2002

Exposed root surfaces can cause esthetic problems, hypersensitivity, and root caries. Numerous efforts have been tried to cover the recessed root surfaces, and various techniques have been developed and introduced. Among these, subepithelial connective tissue graft which shows high coverage rate in various researches, has the advantage of good color match, less discomfort to the donor site, rich vascularity, and high predictability. Following results were obtained after investigating 6 and 18 months post operatively, 98 cases of subepithelial connective tissue graft from 48 patients who underwent subepithelial connective tissue graft procedure in the department of periodontology, college of dentistry, Yonsei university. 1. The total average root coverage of Miller class I, II & III were 76.2?24% at 6 months follow-up and 75?25.2% at 18 months follow-up with no statistically significant difference between the follow-up periods.(p<0.05) 2. The percentage of teeth showing complete coverage were 41.9% at 6 months follow-up and 39.2% at 18 months follow-up. 3. At 6 months follow-up, Miller classification I showed 84.9?20.7%, class II showed 82.5?17.7%, and class III showed 62.3?24.5% of coverage. In class III recession, statistically significantly less root coverage was observed compared to class I & II. (p(0.05) 4. At 18 months follow-up, Miller classification I showed 92.2?13.5%, class II showed 84.3?17.4%, and class III showed 59.5?24.5% of coverage. In class III recession, statistically significantly less root coverage was observed compared to class I & II. (p<0.05) In conclusion, subepithelial connective tissue graft for class I and II recession can be used as a clinically predictable treatment modality for root coverage.