• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.1 s.1
• /
• pp.171-180
• /
• 1993

Concern about nonpoint source pollution associated with urban storm water has led to the development of new tools for better water quality planning. This paper presents an application of a geographic information system (GIS) for urban water quality study. The GIS was used to manage land use data for nonpoint source pollution modeling and to aggregate pollutant loadings within various types of geographic units. An empirical water quality model was used to estimate pollutant loadings based primarily on land use. A land use coverage was created by updating an old coverage through interpretation of recent photography. This land use coverage was also used to record all pollutant loadings for each land use polygon. Storm sewer maps were digitized and interpreted to create a coverage of storm sewer basins and sub-basins. By overlaying pollutant loadings with the sewer sub-basin layer, aggregated pollutant loadings for major sewer outfalls were calculated. Based on the loading information, critical areas of excessive pollutant loadings were located and the effectiveness of Best Management Practices (BMPs) to control pollutant loadings were evaluated.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.79-86
• /
• 2010

This research is a thing about reverse operation about the solar power for location decision and increasing efficiency of the solar power generation equipments. The purpose of this research is reverse operation about the amount of sunshine using the climate and spatial elements. Following the result of correlation analysis, the wind-speed and cloud-amount factor are excluded, because the correlation and significance coefficients are out of value. Each outcome of regression analysis using the other four climate elements, and regression analysis using spatial elements is what the amount of sunshine and the solar altitude are the most influence to the insolation-modeling. Doing the regression analysis based on the precedent result make the result that climate elements have bigger coefficient of regression than spatial elements. This outcome means the climate elements are more influence than spatial elements.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.311-316
• /
• 2006

Despite geospatial information systems are widely used in many different fields as a powerful tool for spatial analysis and decision-making, their capabilities to handle realistic 3-D urban environment are very limited. The objective of this work is to integrate the recent developments in 3-D modeling and visualization into GIS to enhance its 3-D capabilities. To achieve a photorealistic view, building models are collected from a pair of aerial stereo images. Roof and wall textures are respectively obtained from ortho-rectified aerial image and ground photography. This study is implemented by using ArcGIS as the work platform and ArcObjects and Visual Basic as development tools. Presented in this paper are 3-D geometric modeling and its data structure, texture creation and its association with the geometric model. As the results, photorealistic views of Purdue University campus are created and rendered with ArcScene.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.3
• /
• pp.21-27
• /
• 2010

When the capacity of underground caverns' structures is measured, a general surveying is difficult to decide an accurate section of irregular shape and a photographic surveying has problems on picture acquisition due to underground dusts, noise and lighting conditions, etc. The laser scanner system is being much used for 3-dimensional modeling such as topography, planimetric features and structures, etc. without a target by measuring arriving time of a laser pulse reflected after scanning the laser pulse and calculating space coordinates of the reflection position. Accordingly, the present research carried out section and earthwork volume measurement of a tunnel by using a laser scanner in underground anchorage excavation work that a bridge construction is being executed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.5
• /
• pp.519-525
• /
• 2011

High-resolution earth-observing satellites acquire substantial amount of geospatial images. In addition to high image quality, high-resolution satellite images (HRSI) provide unprecedented direct georegistration accuracy, which have been enabled by accurate orbit determination technology. Direct georegistration is carried out by relating the determined position and attitude of camera to the ground target, i.e., projecting an image point to the earth ellipsoid using the collinearity equation. However, the apparent position of ground target is displaced due to the atmosphere and satellite velocity causing significant georegistration bias. In other words, optic ray from the earth surface to satellite cameras at 400~900km altitude refracts due to the thick atmosphere which is called atmospheric refraction. Velocity aberration is caused by high traveling speed of earth-observing satellites, approximately 7.7 km/s, relative to the earth surface. These effects should be compensated for accurate direct georegistration of HRSI. Therefore, this study presents the equation and the compensation procedure of atmospheric refraction and velocity aberration. Then, the effects are simulated at different image acquisition geometry to present how much bias is introduced. Finally, these effects are evaluated for Quickbird and WorldView-1 based on the physical sensor model.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.45-54
• /
• 1997

A mathodology to manage effectively urban open space using GIS(Geographic Information System) was developed to explore the methology of efficient urban open space management focusing on landscaped trees. Cartographic modeling technique was used for practical use of GIS as a case study of the Childeren's park in Kwangju city. First, spatial and attribute information for efficient landscaped tree management was acqired through the development of a tree management cartographic model. Second the information of location and the attribute of individual trees can be applied as a means of decision making in tree management. Thira optimal path of tree management and priority of management in work process of the selected urban open space could be determined according to the objective of park management.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.1 s.11
• /
• pp.65-74
• /
• 1998

The acquisition and analysis system of accurate geometrical digital data is very important in side of maintaining the traditional culture for the preservation of cultural properties. This study is on the construction and shape analysis of precise digital data to manage more successfuly using the CRP method and 3D Mono Mobile System. Also this study could acquisite 3D geometrical digital data, make such various space analysis and section, projection, and calculation of bias, area and volume and modeling by rendering technique on the misterious bell of great king of SungDuck, one of the greatest bells in periods of TongIl Silla. So, We suggest utilization of image analysis method to safety diagnosis for the maintenance of cultural properties, archeological and artistic research.

• Journal of Korean Society for Geospatial Information Science
• /
• v.1 no.2 s.2
• /
• pp.97-104
• /
• 1993

The Cadastre assumed as one of the most important Part of GIS has the highest priority in GIS model and Organization of the Cadasual embraces the modern methods of gaining and collecting geometric type cadastral data concerning on the land and it's ownership. Geneally, the measurement of the topologigraphic map offers great convenience for the architects to device. But the graphic precision of the value from the map is too low for many users, the large scale digital map as well as cadastral map can solve these problems. So it is necessary to get the coordinates of the characteristic points and the graphic information. In this paper, for calculating the point of measured element such as distance, and it's adjustment. This paper dicusses the methodes also, the combination of GIS data and Cadastral data and the geo-reference system, topology, data system, data modeling and so on.

• Journal of Korean Society for Geospatial Information Science
• /
• v.8 no.2 s.16
• /
• pp.71-78
• /
• 2000

In these days, the attributes data recorded in computerization of cadastral maps is just written in its own format, not considered the relation with graphic data. Therefore, digital information linked attribute data to graphic data is necessary to be performed as fundamental data of graphic information and analysis of various spatial information. This study is to present the possibility of GIS application by constructing cadastral information related to graphic and attribute Information based on the cadastral map. Attribute information was constructed as a relational database form using data modeling and entity-relationship diagram. Thus, this study is expected to be used as a fundamental data for various public planning and design including the effective management of cadastral information and building parcel based land information system by presenting various spatial analysis and application methods.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.1 s.24
• /
• pp.39-44
• /
• 2003

Recently, GIS has been increasing its applicability in water resource field. The GIS based modeling process can generally be used for extracting channel network and watershed delineation. Through the overlay analysis, the extracted channel network can be overlayed with topographic and landuse maps to generate the input files for running a hydrologic model. This lead to consider GIS as a tool which can include subjective factors of the model designers in hydrologic analysis. Therefore, this study has compared GIS based HEC-GEOHMS with the classical approach. In general, both approaches have similar results, however, HEC-GROHMS has showed some errors. Based on the results, a GIS based approach could be more effective method with better credibility to obtain input parameters from topographic information as subsequent efforts were made to lessen the errors.