• Geophysics and Geophysical Exploration
• /
• v.23 no.4
• /
• pp.267-267
• /
• 2020

• The Journal of Engineering Geology
• /
• v.10 no.2
• /
• pp.172-188
• /
• 2000

This paper presents the state of art and the role of geophysical exploration techniques with evaluating the trend of domestic and worldwide seawater intrusion research, and illustrates advanced techniques obtained through the project of 'Development of the techniques for estimation, prediction, and prevention of seawater intrusion' funded by the Ministry of Science and Technology of Korea. The advanced geophysical interpretation was achieved by adding the digital geophysical logging data. DC resistivity and TEM monitorings were applied to determine whether or not the seawater intrusion was in progress. Induced Polarization technique using electric current monitoring channel was introduced to discriminate seawater contaminated zone from highly conductive layer caused by clay minerals. A conceptual model was suggested with spatial visualization of the study area to predict the diffusion of seawater contamination. Finally, the future work of the development of geophysical techniques was suggested with the base of the present level of them.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2002.09a
• /
• pp.16-23
• /
• 2002

In the present paper, the geophysical survey in shallow water and transition region is introduced and especially the survey using Ocean Bottom Cable (OBC) is focused.

• Geophysics and Geophysical Exploration
• /
• v.21 no.3
• /
• pp.162-170
• /
• 2018

The purpose of this study is to understand the ground change of large scale mountainous region and to estimate the active weak zone using geophysical exploration (electrical resistivity and refraction seismic explorations) in large scale deep landslide area located in Wanjugun, Jeollabukdo. We also analyzed the characteristics of deep landslides occurred in metamorphic rocks region and confirmed the approximate scale. As a result of comparative analysis of N-value by standard penetration test (SPT), low resistivity anomaly, and tension crack identified from field investigation, a discontinuity in soil layer was estimated at 10 ~ 15 m below the surface. Based on this results, the distribution pattern of active weak zone was confirmed between the discontinuity in soil layer and estimation line of bedrock.

• Geophysics and Geophysical Exploration
• /
• v.20 no.4
• /
• pp.241-267
• /
• 2017

Since the liberation in 1945, Korean specialists in the field of geological science and mineral resources engineering have developed two disciplines through the cooperation and competition with each other. Specialists both in the geophysics and in the geophysical exploration, who share much, have developed their own fields deeper and broader. Since the late 1990s, specialists in both fields felt the need for an independent society to deal with their fields and discussed the establishment of such a society. In 1997, they discussed to establish a unified society which integrates both fields instead of separated societies. However, in 1998, the Korean Geophysical Society and the Korean Society of Exploration Geophysicists were separately established due to some practical problems. During 7 ~ 8 years since the establishment of the two societies, many members of the two societies intended that the two societies should integrate into a single comprehensive society based on the facts that many fields of each society are overlapped and naturally many members of one society are the members of the other society. The leaders of the two societies accepted these opinions also and began to discuss thoroughly the integration from 2005. Eventually, in 2007, the two societies successfully integrated and established the Korean Society of Earth and Exploration Geophysicists. The Korean Society of Earth and Exploration Geophysicists continues to cooperate and compete with other societies of geological science and mineral resources engineering in Korea and in circumpacific area including Asia, Oceania and Americas, contributing to the development of geophysics and geophysical exploration.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.309-315
• /
• 2002

Conventional electromagnetic (EM) method using small loops as a source and receiver has been used in detection of conductive buried objects like a metal detector or in qualitative estimation of the subsurface conductivity variation. Recently, however, since detection of buried objects and imaging of the subsurface conductivity distribution in a relatively conductive area are in a high demand for environmental and engineering purposes, the quantitative interpretation technique of EM data is actively studied. In this regard, we introduce a brief principle of EM survey and show an example of the detection of buried conductive material and imaging of the subsurface conductivity distribution based on data measured at a test survey area. Through this study, we show that multi-frequency EM surveys using small loops may be a good solution to give quick and detail information of subsurface in a conductive survey area.

• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.223-235
• /
• 2002

Since weak Bones or geological lineaments are likely to be eroded, there may develop weak Bones beneath rivers, and a careful evaluation of ground condition is important to construct structures passing through a river. DC resistivity method, however, has seldomly applied to the investigation of water-covered area, possibly because of difficulties in data aquisition and interpretation. The data aquisition having high quality may be the most important factor, and is more difficult than that in land survey, due to the water layer overlying the underground structure to be imaged. Through the numerical modeling and the analysis of a case history, we studied the method of resistivity survey at the water-covered area, starting from the characteristics of measured data, via data acquisition method, to the interpretation method. We unfolded our discussion according to the installed locations of electrodes, ie., floating them on the water surface, and installing them at the water bottom, because the methods of data acquisition and interpretation vary depending on the electrode location. Through this study, we could confirm that the DC resistivity method can provide fairly reasonable subsurface images. It was also shown that installing electrodes at the water bottom can give the subsurface image with much higher resolution than floating them on the water surface. Since the data acquired at the water-covered area have much lower sensitivity to the underground structure than those at the land, and can be contaminated by the higher noise, such as streaming potential, it would be very important to select the acquisition method and electrode array being able to provide the higher signal-to-noise ratio (S/N ratio) data as well as the high resolving power. Some of the modified electrode arrays can provide the data having reasonably high S/N ratio and need not to install remote electrode(s), and thus, they may be suitable to the resistivity survey at the water-covered area.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2011.10a
• /
• pp.3-12
• /
• 2011

• Geophysics and Geophysical Exploration
• /
• v.5 no.2
• /
• pp.126-134
• /
• 2002

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.128-131
• /
• 2010