• 한국유체기계학회 논문집
• /
• 제11권2호
• /
• pp.55-63
• /
• 2008

An examination of the condition of the flow leaving the impeller exit kinetic energy often accounts for 30-50% of the shaft work input to the compressor stage, and for energy efficiency it is important to recover as much of this as possible. This is the function of the diffuser which follows the impeller. The purpose of this study is to investigate the sensitivity of how compressor performances changes as vaned diffuser geometry is varied. Three kinds of vaned diffusers were studied and its results were compared. First vaned diffuser type is based on NACA airfoil and second is channel diffuser and third is conformal transformation of NACA65(4A10)06 airfoil. Mean-line prediction method was applied to investigate the performance and stability for three kinds of diffusers. And CFD analyses have been done for comparison and detailed interior flow pattern study. NACA65(4A10)06 airfoil showed the widest operating range and higher pressure characteristics than the others.

• Korea-Australia Rheology Journal
• /
• 제17권3호
• /
• pp.99-110
• /
• 2005

This work presents results of finite element analysis of isothermal incompressible creeping viscoelastic flows with the tensor-logarithmic formulation of the Leonov model especially for the planar geometry with singular comers in the domain. In the case of 4:1 contraction flow, for all 5 meshes we have obtained solutions over the Deborah number of 100, even though there exists slight decrease of convergence limit as the mesh becomes finer. From this analysis, singular behavior of the comer vortex has been clearly seen and proper interpolation of variables in terms of the logarithmic transformation is demonstrated. Solutions of 4:1:4 contraction/expansion flow are also presented, where there exists 2 singular comers. 5 different types spatial resolutions are also employed, in which convergent solutions are obtained over the Deborah number of 10. Although the convergence limit is rather low in comparison with the result of the contraction flow, the results presented herein seem to be the only numerical outcome available for this flow type. As the flow rate increases, the upstream vortex increases, but the downstream vortex decreases in their size. In addition, peculiar deflection of the streamlines near the exit comer has been found. When the spatial resolution is fine enough and the Deborah number is high, small lip vortex just before the exit comer has been observed. It seems to occur due to abrupt expansion of the elastic liquid through the constriction exit that accompanies sudden relaxation of elastic deformation.

• Korea-Australia Rheology Journal
• /
• 제17권2호
• /
• pp.47-62
• /
• 2005

The present study deals with a mathematical model describing the dynamic response of heat and mass transfer in blood flow through bifurcated arteries under stenotic condition. The geometry of the bifurcated arterial segment possessing constrictions in both the parent and the daughter arterial lumen frequently appearing in the diseased arteries causing malfunction of the cardiovascular system, is formulated mathematically with the introduction of the suitable curvatures at the lateral junction and the flow divider. The blood flowing through the artery is treated to be Newtonian. The nonlinear unsteady flow phenomena is governed by the Navier-Stokes equations while those of heat and mass transfer are controlled by the heat conduction and the convection-diffusion equations respectively. All these equations together with the appropriate boundary conditions describing the present biomechanical problem following the radial coordinate transformation are solved numerically by adopting finite difference technique. The respective profiles of the flow field, the temperature and the concentration and their distributions as well are obtained. The influences of the stenosis, the arterial wall motion and the unsteady behaviour of the system in terms of the heat and mass transfer on the blood stream in the entire arterial segment are high­lighted through several plots presented at the end of the paper in order to illustrate the applicability of the present model under study.

• 소음진동
• /
• 제4권2호
• /
• pp.163-175
• /
• 1994

An analytical method for nautral frequencies of a partially liquid- filled circular cylindrical shell with various boundary conditions is developed by means of the Stokes's transformation and Fourier series expansion on the basis of Sanders' shell equation. The liquid-shell coupled system is divided into two regions for convenient formulation. One is the empty shell region in which the Sanders' shell equations are formulated without the lipuid effect, the other is wetted shell region in which the shell equations are formulated with consideration of the liquid dynamic effect. The shell equations for each regions are combined by the geometry and the force continuities at the junction of the two regions. For the vibration relevant to the liquid motion, the velocity potential of liquid is assumed as a sum of linear combination of suitable harmonic functions in axial direction. The unknown parameters are selected to satisfy the boundary condition along the wetted shell surface. The natural frequencies of the liquid filled cylindraical shells with the clamped- free and the clamped-clamped boundary conditions examined in the previous works, are obtained by this analytical method. The results are compared with the previous works, and excllent agreement is found for the natural frequencies of the shells.

• 한국군사과학기술학회지
• /
• 제23권3호
• /
• pp.195-203
• /
• 2020

Selective laser melting(SLM) is one of the powder bed fusion(PBF) processes, which enables quicker production of nearly fully dense metal parts with a complex geometry at a moderate cost. However, the process still lacks knowledge and the experimental evaluation of possible process parameter sets is costly. Thus, this study presents a finite element analysis model of the SLM process to predict the melt pool characteristics. The physical phenomena including the phase transformation and the degree of consolidation are considered in the model with the effective method to model the volume shrinkage and the evaporated material removal. The proposed model is used to predict the melt pool dimensions and validated with the experimental results from single track scanning process of Ti-6Al-4V. The analysis result agrees with the measured data with a reasonable accuracy and the result is then used to evaluated each of the process parameter set.

• 한국실내디자인학회논문집
• /
• 제14권3호
• /
• pp.95-102
• /
• 2005

Guarini's architectural contribution has simply focused on the dome structure that has been known to us; however, his geometric and spatial construction has been overlooked so far Through this study, it has been demonstrated that the dome structure was simply part of geometrical forms that Guarini wanted to express ultimately and it functioned as a geometrical element such as the network combined with the entire spatial structure. The purpose of this study is to reevaluate Guarini's architectural thought by means of investigating the ultimate principles of spatial composition appeared in the late Baroque architecture through the analysis of the principles of spatial composition and organized formal Idioms by Guarini's geometrical concepts. Besides, it has been assumed that such geometrical concepts by Guarini's mathematical proportion and his reiteration and change of diagrams could be clearly distinguished from the Classical geometry in the Renaissance and Guarini. suggested a way to create a new space through more active and amusing application and transformation. In this aspect, Guarini's principles of geometric composition will be one of the role models that need to be seriously reconsidered in chaotic reality of modern architecture.

• 한국통신학회논문지
• /
• 제19권5호
• /
• pp.796-804
• /
• 1994

본 논문은 Inverse SAR를 이용하여 속도를 모르는 움직이는 물체의 영상 이미지를 얻는 이미징 알고리즘을 제시하였고 실제 데이터를 알고리즘에 적용되었다. 실제 데이터는 stepped-frequency 변조된 레이더 신호를 송신하였고 수신된 데이터는 sampling rate이 충분하지 않으나 reference 신호를 mixing 시켜 unaliased 되게 만든 후 interpolation 에 의해서 해결하였다. 알고리즘을 적용시키는데 요구되는 물체의 속도는 subaperture processing 방법에 의해서 얻어졌으며 얻어진 속도에 의해서 squint-mode SAR geometry 로 변환한 후 최근에 제시된 approximation 이 없는 이미징 알고리즘을 사용하여 최종적으로 이미지를 얻게 되었다. 또한 ISAR가 데이터를 송수신 하는 동안 물체의 속도가 변하는 경우 이것을 보상하는 방법을 제시하였다.

• ETRI Journal
• /
• 제33권4호
• /
• pp.517-527
• /
• 2011

Currently, there is a considerable interest in 3D object reconstruction using terrestrial laser scanner (TLS) systems due to their ability to automatically generate a considerable amount of points in a very short time. To fully map an object, multiple scans are captured. The different scans need to be registered with the help of the point cloud in the overlap regions. To guarantee reliable registration, the scans should have large overlap ratio with good geometry for the estimation of the transformation parameters among these scans. The objective of this paper is to propose a registration method that relaxes/eliminates the overlap requirement through the utilization of photogrammetrically reconstructed features. More specifically, a point-based procedure, which utilizes non-conjugate points along corresponding linear features from photogrammetric and TLS data, will be used for the registration. The non-correspondence of the selected points along the linear features is compensated for by artificially modifying their weight matrices. The paper presents experimental results from simulated and real datasets to illustrate the feasibility of the proposed procedure.

• Transactions on Electrical and Electronic Materials
• /
• 제1권4호
• /
• pp.20-24
• /
• 2000

This study aimed to develop ITO(Indium Tim Oxide) tin films ablation with a pulsed type KrF excimer laser required for the electrode patterning application in flat panel display into small geometry on a large substrate are. The threshold fluence for ablating ITO on glass substrate is about 0.1 J/㎠. And its value is much smaller than that using 3 .sup rd/ harmonic Nd:YAG laser. Through the optical microscope measurement the surface color of the ablated ITO is changed into dark brown due to increase of surface roughness and transformation of chemical composition by the laser light. The laser-irradiated regions were all found to be electrically isolating from the original surroundings. The XPS analysis showed that the relative surface concentration of Sn and In was essentially unchanged (In:Sn=5:1)after irradiating the KrF excimer laser. Using Al foil made by 2$\^$nd/ harmonic Na:YAG laser, the various ITO patterning is carried out.

• 대한수학교육학회지:학교수학
• /
• 제16권4호
• /
• pp.677-690
• /
• 2014

수학교육에서 도형영역 학습은 공감감각 기르기와 도형과 관련된 개념형성을 주요 특징으로 한다. 공간감각 기르기 활동은 주로 여러 가지 변환의 관점에서 다루고 있으며 도형학습과 관련된 수업모형은 주로 개념형성 모형을 따르고 있다. 그러나 개념과 개념을 이어주는 연결성과 관련된 학습 내용은 부족하다. 본 연구에서는 공간감각을 도형에 관한 직관과 도형과 관련된 개념들 사이의 관계적 이해의 능력으로 보고 등주문제 분석을 통해서 공간감각 기르기 활동과 관련된 교수 학습 자료를 추출하고 이를 바탕으로 한 사례분석을 통해 교육학적 시사점을 얻고자 한다.