• 패션비즈니스
• /
• 제20권2호
• /
• pp.46-58
• /
• 2016

Architecture and Fashion mutually affects the shape and appearance of the other as an art of space according to the hybrid trends. Therefore, the purpose of this study is to find the correlations between the characteristics of traditional architecture types in Southeast Asia and modern fashion. Firstly, characteristics of the types obtained through the theoretical consideration of Southeast Asian architectural tradition include vertical, symmetrical, geometrical, epeated and continual structure. On the basis of these characteristics analyzed from 2013's S/S to 2015's F/W collection of Alexander McQueen, Gareth Pugh, Victor & Rolf, designers with strong creative and experimental minds who juxtaposed designs of two opposing points as well as hybrids since 2000, the following formativeness exists. First, the vertical structure of high floor is represented as a straight silhouette, a color contrast, vertical cut or wrinkle. Hence, it impresses verticality, rhythm, etc. Second, symmetrical structure of the gable roof is represented as a trapezoidal shape starting from the shoulder line or neck line widened into sleeves, impressing symmetry, dynamism, etc. Third, the geometry of the assembled is represented as vertical and horizontal bands or pattern pieces like puzzle, impressing geometry, three-dimensional, etc. Fourth, repeated structure of the weaving pattern is represented as repetitive patterns of woven fabric or printing techniques. Thus, it impresses repeatability, harmony, etc. And lastly, continuous group structure is represented as a connection of collars or hem-lines, as well as a crossing of fabric that impresses continuity, liquidity, etc.

• 한국해양공학회지
• /
• 제30권4호
• /
• pp.235-242
• /
• 2016

In general, ship hull form design is carried out in two stages. In the first stage, the longitudinal variation of the sectional area curves is adapted from a similar mother ship to determine the volume distribution in ships. At this design stage, the initial design conditions of displacement, longitudinal center of buoyancy, etc. are satisfied and the global hydrodynamic properties of the structure are optimized. The second stage includes the local designing of the sectional forms. Sectional forms are related to the local pressure resistance in the fore- and aft-body shapes, cargo boundaries, interaction between the hull and propeller, etc. These relationships indicate that the hull sections need to be optimized in order to minimize the local resistance. The volumetric balanced (VOB) variation of ship hull forms has been suggested by Kim (2013) as a generalized, systematic variation method for determining the sectional area curves in hull form design. This method is characterized by form parameters and is based on an optimization technique. This paper emphasizes on an extensional function of the VOB considering a geometrical wave profile. We select a container ship and an LNG carrier to demonstrate the applicability of the proposed technique. Through analysis, we confirm that the VOB method, considering the geometrical wave profile, can be used as an efficient tool in the hull form design for ships.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.125-127
• /
• 2001

Switched reluctance motor (SRM) has some advantages such as low cost, high torque density etc. However SRM has inevitably high torque ripple due to the double salient structure. To apply SRM to industrial field, we have to minimize torque ripple, which is the weak-Point of SRM. This paper presents optimal design process of SRM using numerical method such as 2D finite element method (FEM) and 3D equivalent magnetic circuit network method (EMCNM). The electrical and geometrical design parameters have been adopted as 2D design variables. The overhang structure of rotor has been also adopted as 3D design variable. From this work, we can obtain the optimal design, which minimize the torque ripple and maximize energy conversion loop.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.473-473
• /
• 2009

There have been many academic researches on the aerodynamic design of wind turbine based on blade element method (BEM) and momentum theory (MT, or actuating disk theory). However, in the real world, the turbine blade design requires many additional constraints more than theoretical analysis. The standard procedure is studied in the present paper to design new blades for the wind turbine system ranged from the small size from 1 to 10 kW. From the experience of full design of a 10 kW blade, the authors tried to set up a standard procedure for the aerodynamic design based on IEC 61400-2. Wind-turbine scale, rotating speed, and geometrical chord/twist distribution at the segmented span positions are calculated with a suitable BEM/MT code, and the geometrical shape of tip and root should be modified after considering various parameters: wing-tip vortex, aerodynamic noise, turbine efficiency, structural safety, convenience of fabrication, and even economic factor likes price, etc. The evaluated data is passed to the next procedure of structural design, but some of them should still be corresponded with each other: the fluid-structure interaction is one of those problems not yet solved, for example. Consequently, the design procedure of small wind-turbine blades is set up for the mass production of commercial products in this research.

• 한국강구조학회 논문집
• /
• 제14권4호
• /
• pp.489-497
• /
• 2002

구조물이 거대해지고 복잡해지면서 미소변현을 전제로 한 선형이론으로는 해석이 불가능한 대변형 및 비선형 거동이 발생하는 경우가 많아지고 있다. 또한 고성능 컴퓨터의 등장과 다양한 수치해석 기법의 개발 등으로 보다 엄격한 설계기준에 따른 구조의 최적화 설계가 절실히 요구되고 있다. 그로 인해 선형 영역내에서 한정되었던 구조공학적인 문제를 비선형 영역까지 확대시켜 구조물의 거동을 보다 정확히 분석하고, 예상 가능한 문제점을 사전에 파악하여 효율적이고 경제적인 최적의 구조물을 설계해야 한다. 본 연구에서는 비등방성 원통형 쉘 구조물의 기하학적 비선형 문제를 해결하였다. 원통형 쉘의 반경방향 길이와 원통방향의 길이비인 형상비 변화, 부분 원통형 쉘의 중심각 변화, 화이버 각도 변화, 적층수와 배열조건 변화 등의 다양한 조건에 따라 비등방성 원통형 쉘 구조의 기하학적 비선형 거동특성을 분석하였다.

• 한국공간구조학회논문집
• /
• 제16권4호
• /
• pp.45-52
• /
• 2016

The single layer latticed domes have attracted many designers and researchers's attention all of the world, because these structures as spatial structure are of great advantage in not only mechanical rationality but also function, fabrication, construction and economic aspect. But single layer latticed domes are apt to occur the unstable phenomena that are called "buckling" because of the lack of strength of members, instability of structural shape, etc. In the case of latticed dome, there are several types of buckling mode such as overall buckling, local buckling, and member buckling according to the shape of dome, section type of member, the size of member, junction's condition of member and so on. There are many methods to increase the buckling strength of the single layer latticed dome, that is, with the change of geometrical shape of dome, the reinforcement of buckled member, etc. Therefore, the purpose of this study is to verify the reinforcement effect of buckled member when designers reinforce the buckled member to increase the buckling strength of single layer latticed dome with 3-way grid.

• 한국통신학회논문지
• /
• 제17권10호
• /
• pp.1109-1116
• /
• 1992

Mathematical morphology는 이론적 배경으로 신호 및 시스템의 기하학적 특성을 해석하는데 우수하고 잡음이 섞인 데이터를 고르기에 있어서 매우 성공적으로 적용되고 있다. 본 논문에서는 morphological필터의 하드웨어 구현은 같은 회로에서 gray scale dilation과 erosion을 수행하여 최소값과 최대값을 선택하도록 함으로써 회로의 복잡성을 줄이고 병렬처리가 가능하도록 하였다. Morphological filter의 구조는 structuring element블록, 이미지 데이타 블록, 제어 블록, ADD 블록, MIN/MAX블록으로 구성되고 실시간 처리가 가능하도록 하드웨어를 설계, one chip화 한다.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.20-27
• /
• 1998

According as the member of the automobile body structure have been thinned their thickness and have become high strength, each part of the body structure has been put more severe stress condition. And, because fatigue strength of the spot welded lap joint is influenced by its geometrical and mechanical factors, welding condition and etc., there needs a quantitative and systematic evaluation method for them. In this study, by considering nugget edge of the spot weld part of the IB-type spot welded lap joint under tension-shear load to the ligament crack. fatigue strength of various IB-type spot welded lap joints was estimated with the stress intensity factor(S.I.F.) KIII which is fracture mechanical parameter. We could find that fatigue strength evaluation of the IB-type spot welded lap joints by KIII is more effective than the maximum principal stress ($\sigma$1max) at edge of the spot weld obtained from FEM analysis.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.314-319
• /
• 2005

When a robot navigates in the real environment, it frequently meets various environments that can be expressed by simple geometrical shapes such as fiat floor, uneven floor, floor with obstacles, slopes, concave or convex corners, etc. Among them, the convex corner composed of two plain surfaces is the most difficult one for the robot to negotiate. In this paper, we propose a gait planning algorithm to help the robot overcome the convex environment. The trajectory of the body is derived from the maximum distance between the edge boundary of the corner and the bottom of the robot when it travels in the convex environment. Additionally, we find the relation between kinematical structure of the robot and its ability of avoiding collision. The relation is realized by considering the workspace and the best posture of the robot in the convex structure. To provide necessary information for the algorithm, we use an IR sensor attached in the leg of the robot to perceive the convex environment. The validity of the gait planning algorithm is verified through simulations and the performance is demonstrated using a quadruped walking robot, called "MRWALLSPECT III"( Multifunctional Robot for WALL inSPECTion version 3).

• 오토저널
• /
• 제13권5호
• /
• pp.42-50
• /
• 1991

According as the members and inner and outer plates of the automobile body structure have been thinned their thickness and have become high strength, each part of the body structure has been put more severe stress condition. Therefore, it has been increasingly required to improve the fatigue strength of the spot welded structures. As one of the improving methods for such problem, the author had previously proposed the method of alleviating stress concentration at nugget edge of the spot weld part and improving its fatigue strength [1]. But, because fatigue strength of the spot welded lap joint is influenced by its geometrical and mechanical factors, welding condition and etc., there needs a quantitative and systematic estimation method of them. In this report, by considering nugget edge of the spot weld part of the spot welded lap joint subjected to tensile load to the ligament crack, fatigue strength of various spot welded lap joints was estimated with the stress intensity factor (S.I.F.) K which is fracture mechanical parameter. It is known that evaluation of fatigue strength of the spot welded lap joint by the stress intensity factor (S.I.F.) K is more effective than the maximum stress $(\sigma_{ymax}$) at edge of the spot weld part on the center line of width of the plate.