• Journal of Korean Society of Steel Construction
• /
• v.27 no.5
• /
• pp.423-433
• /
• 2015

A double split tee connection, which is a beam-column moment connection, shows different behavioral characteristics under the influences of the thickness of a T-stub flange, a high-strength bolt gauge distance, and the number and diameter of a high-strength bolt. A double split tee connection is idealized and designed that a flexural moment normally acting on connections can be resisted by a T-stub and a shear force by a shear tap. However, where a double split tee connection is adopted to a low-and medium-rise steel structure, a small-sized beam member can be adopted. Then, a shear tab may not be bolted to the web of a beam. This study was conducted to suggest the details of a connection to secure that a double split tee connection with a geometric shape has a sufficient capacity to resist a shear force. To verify this, this study was conducted to make a three-dimensional nonlinear finite element analysis on a double split tee connection.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.2
• /
• pp.417-426
• /
• 2015

The representative design elements of the road geometric structure are longitudinal slope, horizontal curve radius, super elevation, and transition curve. According to the function of a road, the design standards of these elements is applied by diverse combinations of them. This study divided expressway into homogeneous segments based on longitudinal slope and horizontal curve radius. And then, data required for analysis were matched to each segment, and the safety performance function was built by using the established data. crash modification factors which can explain traffic accident exposure rate were calculated. When the threshold value of horizontal curve radius R=1,000 m was set to 1.0, the crash modification factors at R=300 m was calculated as 1.33, which means that the accident exposure rate is increased by 33%. When the threshold value of the longitudinal slope 0% was set to 1.0, the crash modification factors demonstrated that the accident exposure rate decreases on the upward slope and the accident exposure rate increases on the downward slope. The results of this study can be used as basic information in the design of expressway geometries during the improvement or the construction of expressways.

• Journal of the Korean School Mathematics Society
• /
• v.23 no.1
• /
• pp.129-158
• /
• 2020

In this study, we presented two geometric tasks to three 11th grade students to identify the characteristics of the images that the students had at the beginning of problem-solving in the problem situations and investigated how their images changed during problem-solving and effected their problem-solving behaviors. In the first task, student A had a static image (type 1) at the beginning of his problem-solving process, but later developed into a dynamic image of type 3 and recognized the invariant relationship between the quantities in the problem situation. Student B and student C were observed as type 3 students throughout their problem-solving process. No differences were found in student B's and student C's images of the problem context in the first task, but apparent differences appeared in the second task. In the second task, both student B and student C demonstrated a dynamic image of the problem context. However, student B did not recognize the invariant relationship between the related quantities. In contrast, student C constructed a robust quantitative structure, which seemed to support him to perceive the invariant relationship. The results of this study also show that the success of solving the task 1 was determined by whether the students had reached the level of theoretical generalization with a dynamic image of the related quantities in the problem situation. In the case of task 2, the level of covariational reasoning with the two varying quantities in the problem situation was brought forth differences between the two students.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.163-182
• /
• 1997

The purpose of this study was intended to analyze artistic formativeness represented in the modern fashion design materials. Nowadays the modern fashion design materials is characterized by variety. The fashion materials the most important of fashion is called a softwear in textile industry and emerged as a new field. Fashion design also escaped from the tra-ditional restraint and extended to pursue lib-eral clothes and the designer's creative inten-tion has resulted in conceptual and conven-tional alteration as a new mode of plastic ex-preseeion. As a results of analysis of the formative fea-ture of Art style represented in the modern fashion design materials. First Surrealism had been searching for a new way of confronting a social and rtistic environment that was stifling and repugnant to them. Accordingly the wide applicaytion of the various object due to the thought of Sur-realism through the modern fashion materials brought the diversification and individua-lization of the modern fashion design. Second Pop Art that is made modern mech-anic culture and commercialism brought the great transformation in the history of Art out of the existing style and the sense of ex-pression. And the plastic characteristics of Pop Art that has a gravity as modern fashion materials on a them of the elements of popular consumer's society. That is the common and cheap objects were introduced into fashion materials itself or pat-tern. Third Minimalism is a trend in art att-empting to seek essence of the object by presenting simple and disciplined expressions by minimal formative means. The features of external form are simplicity clarity unrelated composition and symmetrical structure. Mini-malism was a quest for basic elements repre-senting the fundamental esthetic values of art. The minimal expression in modern fashion materials mean fabrics with simple surface and is contained using simple geometric pattern or utilizing textiles without any patterns. Fourth Eroticism is a kind of psychological revolution in the development of human civilization and is deeply rooted in the cultural tradition of myth religion customs and art. So Eroticism must be distinguished from a mere animal reproduction. These erotic char-acteristics were holded the meanings of sexu-ality through the modern fashion materials. Especially it was expressed the sexual part of body was nakedly showed through trans-parent materials or semitransparent like metalic and opaque materials. Recently the various kinds of new materials such as paper vinyle plastic metal as well as human body were applied to new fashion de-sign. First of all the new materials will give modern fashion designers stimuli and inspi-ration. It can also express values of moderners to despise materialism and uniformed modern society and to recover humanity and self-actualization.

• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.117-129
• /
• 2012

Road safety audit is the preventive enhancement strategy for safety. : it gets rid of beforehand the potential factor of a traffic accident in the stage of road planning and design and it evaluates the appropriation for road geometric structure or safety facility to prevent traffic accident in the stage of operation after the construction. Since this strategy is introduced to our country in the early 2000s, various projects have been processed and it was legislated recently. And now, the evaluation of past project for its continuation is needed. Therefore, in this study the evaluation of road safety audit on existing freeway is performed. The spatial extent of this study is Yong-dong line on which the safety treatment was executed in 2005 and 2006. And, the temporal range of this study is each 2-year of before and after from 2005 and 2006. The empirical bayes method of observational evaluation studies is applied to analyze. As a result, there is an effect of improvement on most of treated sections. But there is ineffective or negligible on some sections. Compared with the detail of treatment on each section, the effect of multiple or various treatments is good for that section. On the other hand, the section on which effect doesn't appear is the result of single or unimportant treatments. Throughout these results, the concrete analysis can be performed and the countermeasures designed for the section on which effect doesn't appear. Also it is used as reference to the future plan and direction of road safety audit on existing freeway.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.487-494
• /
• 2020

The distance between the source and the detector, the diameter of the detector, and the volume effect of the radiation source result in a change in solid angle at the detector entrance, which affects the determination of detection efficiency by causing a difference in path length within the detector. A typical analysis method for calculating solid angles was useful only for a source (⁶⁰Co) with a simple geometric structure, so in this experiment, the distance between the detector and the source was measured by switching on for up to 25 cm with the reference point of window cap 0.5 cm. In addition, 450 and 1000 ㎖ Marinelli beaker of standard volumetric sources were closely adhered to the detector. For circular point sources co-axial with the detector, the change in the solid angle to the distance from the detector window is equal to half the square radius of the source versus the square radius of the detector, if the resulting relationship of the calculation analysis results in the detector being less than the radius of the source. Since the solid angular difference is 0.5 the result of Monte Carlo is acceptable. The relationship between detector and source distance is shown. Solid angles have been verified to decrease rapidly with distance. Measurement and simulation results for a volumetric source show a difference of ±1.01% from a distance of 0 cm and less than 4 % when the distance is reduced to 5 and 10 cm. It can be seen that the longer distance, the smaller efficiency angle, and the exponential increase in attenuation as the energy decreases, is reflected in the calculation of efficiency. Thus, the detection efficiency has proved sufficient for the use of solid angle and Monte Carlo codes.

• Journal of the Korean Society of Radiology
• /
• v.12 no.2
• /
• pp.209-216
• /
• 2018

In the field of angiography and interventional radiology, it is said that the risk of radiation exposure to the eyes is high due to the characteristics of work, but currently divided dose assessment and management are not carried out in reality. Therefore, in this study, in order to evaluate the dose of the operator in the surgical environment and to analyze the shields, firstly, we selected the point where the operator is mainly located, evaluated the exposure dose of the eye after attaching the pocket dosimeter to the lateral angle point of the head and neck phantom, and evaluate shielding effect when wearing lead glasses that is currently commercialized. Secondly, we evaluated the tendency of the exposure dose of the eye and the shielding effect through simulation in the same geometric structure as the actual measurement. As a result, in the case of measurement using a dosimeter, the cumulative dose increased with the increase of the fluoroscopic time, and the tendency was different according to the position of the operator. Simulation results show that the dose distribution of the eye lens in the mathematical phantom is about 1.1 ~ 1.3 times higher than that of the cornea. Also, The protective effect of the lead glasses showed a shielding effect of at least 3.7 ~ 21.4% in each eye.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.4
• /
• pp.457-463
• /
• 2012

The basilar membrane (BM), one of organs of cochlea, has the specific positions of the maximum amplitude at each of related frequencies. This phenomenon is due to the geometry of BM. In this study, as the part of the research for the development of fully implantable artificial cochlea which is based on polymer membrane, parametric studies are performed to suggest the desirable artificial basilar membrane model which can detect wider range of frequency separation. The vibro-acoustic characteristics of the artificial basilar membrane are predicted through finite element analysis using commercial software Abaqus. Simulation results are verified by comparing with experimental results. Various geometric shapes of the BM and residual stress effects on the BM are investigated through the parametric study to enable a wider detectable frequency separation range.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.259-267
• /
• 2013

GIS-based web map service is all the more accessible to the public. Among others, location query services are most frequently utilized, which are currently restricted to only one keyword search. Although there increases the demand for the service for querying multiple keywords corresponding to sequential activities(banking, having lunch, watching movie, and other activities) in various locations POI, such service is yet to be provided. The objective of the paper is to develop the k-IPS algorithm for quickly and accurately querying multiple POIs that internet users input and locating the search outcomes on a web map. The algorithm is developed by utilizing hierarchical tree structure of $R^*$-tree indexing technique to produce overlapped geometric regions. By using recursive $R^*$-tree index based spatial join process, the performance of the current spatial join operation was improved. The performance of the algorithm is tested by applying 2, 3, and 4 multiple POIs for spatial query selected from 159 keyword set. About 90% of the test outcomes are produced within 0.1 second. The algorithm proposed in this paper is expected to be utilized for providing a variety of location-based query services, of which demand increases to conveniently support for citizens' daily activities.

• Analytical Science and Technology
• /
• v.6 no.1
• /
• pp.107-119
• /
• 1993

The purpose of this study is to investigated the elution behavior of platinoid metal acetylacetonates, which is the key to elucidate their retention mechanism and optimize their RPLC separation conditions. The retention data of four platinoid metal acetylacetonates have been measured on four different columns in methanol-water and acetonitrile-water systems. The retention of uncharged platinoid metal acetylacetonates is interpreted by solvophobic effect. The retention of platinoid metal acetylacetonates is also greatly influenced by the geometric structure of the complexes. The square planar chelates, $Pd(acac)_2$, $Pt(acac)_2$, are retained longer than the octahedral chelates, $Rh(acac)_3$, $Ir(acac)_3$. It is likely due to that square planar chelates show greater interaction with nonpolar stationary phase than octahedral chelates. The results of van't Hoff plots have shown that platinoid metal acetylacetonates is operated on the same retention mechanism in the temperature range of $25{\sim}45^{\circ}C$. The study of the retention mechanism by the enthalpy-entropy compensation phenomenon has indicated that the retention mechanism of octahedral chelates and square planar chelates do not vary with the composition change of methanol-water mobile phase, respectively. In acetonitrile-water mobile phase, however, the retention mechanism is observed to be more complicated. Optimum condition for the separation of four platinoid metal acetylacetonates is found to be 40% methanol, polymeric C18 column, and $45^{\circ}C$.