• 제어로봇시스템학회논문지
• /
• 제7권11호
• /
• pp.933-938
• /
• 2001

In this paper, we describe a method for the mobile robot using images of a moving object. This method combines the observed position from dead-reckoning sensors and the estimated position from the images captured by a fixed camera to localize a mobile robot. Using the a priori known path of a moving object in the world coordinates and a perspective camera model, we derive the geometric constraint equations which represent the relation between image frame coordinates for a moving object and the estimated robot`s position. Since the equations are based on the estimated position, the measurement error may exist all the time. The proposed method utilizes the error between the observed and estimated image coordinates to localize the mobile robot. The Kalman filter scheme is applied to this method. Effectiveness of the proposed method is demonstrated by the simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1173-1177
• /
• 1990

Cerebellar Model Linear Associator Net(CMLAN), a kind of neuro-net based adaptive control function generator, was applied to the problem of direct inverse calibration of three and six d.o.f. POMA 560 robot. Since CMLAN autonomously maps and generalizes a desired system function via learning on the sampled input/output pair nodes, CMLAN allows no knowledge in system modeling and other error sources. The CMLAN based direct inverse calibration avoids the complex procedure of identifying various system parameters such as geometric(kinematic) or nongeometric(dynamic) ones and generates the corresponding desired compensated joint commands directly to each joint for given target commands in the world coordinate. The generated net outputs automatically handles the effect of unknown system parameters and dynamic error sources. On-line sequential learning on the prespecified sampled nodes requires only the measurement of the corresponding tool tip locations for three d.o.f. manipulator but location and orientation for six d.o.f. manipulator. The proposed calibration procedure can be applied to any robot.

• 한국항해항만학회지
• /
• 제43권3호
• /
• pp.172-178
• /
• 2019

위성항법시스템의 안정적인 항법정보 제공에 대한 요구사항은 점차 증가하고 있지만, 의도적인 전파교란 및 자연환경 변화에 의한 성능 저하는 현실적으로 완벽히 해결하기 어렵다. 이러한 위성항법 시스템의 단점을 보완하기 위한 대표적인 항법시스템으로 고출력 신호를 이용한 지상파항법시스템인 eLoran이 주목받고 있고, 의도적인 전파교란에 강인하다는 장점이 있다. 사용자는 eLoran 시스템에서 사용 환경에 따라 E-field 또는 H-field 수신 안테나 중에서 적합한 것을 사용한다. 안정적인 접지 연결에 대한 제약이 없고, 상대적으로 주변 전자장비의 잡음에 강인한 H-field 안테나는 두 개의 루프로 구성되어 루프 간의 위상과 이득차이로 인해 등방성을 가지지 못한다. 그러므로 H-field 안테나는 정지위치에서도 수신한 신호의 방향에 따라 측정치의 변화가 발생하는 단점이 있고, 보다 정확한 측위 결과를 위해서는 신호의 방향에 따른 오차를 제거해야한다. 본 논문에서는 H-field 안테나와 송신국간의 기하학적 방향에 따른 오차를 제거하기 위한 지향성 보상기법을 제안하였다. eLoran 모의 신호생성기를 활용하여 오차를 분석하고 모델링하여 보상하는 기법을 개발하였고, 시뮬레이션과 차량실험을 통해 제안한 기법의 성능을 검증하였다.

• 대한기계학회논문집B
• /
• 제27권3호
• /
• pp.326-333
• /
• 2003

In the measurement using DMA and CPC in series, there is some time delay for particles classified in DMA to detect in CPC. During this time, the DMA time-response changes due to the velocity profile of sampling tube and the diffusion of particles in the volume that exists between the DMA exit and the detector of ultra-fine CPC. This is called mixing effect. In the accelerated measurement methods like the TSI -SMPS, the size distribution is obtained from the correlation between the time-varying electrical potential of the DMA and the corresponding particle concentrations sampled in DMA. If the DMA time -response changes during this delay time, this can cause the error of a size distribution measured by this accelerated technique. The kernel function considering this mixing effect using the residence time distribution is proposed by Russell et al. In this study, we obtained a size distribution using this kernel to compare to the result obtained by the commercial accelerated measurement system, TSI -SMPS for verification and considered the errors that result from the mixing effect with the geometric mean diameters of originally sampled particles, using virtually calculated responses obtained with this kernel as input data.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.700-703
• /
• 2003

The test method of ASTM E 756 and KS D 0076 to estimate vibration-damping properties is compared. Comparison method depending on specimen support, exciting method and calculation method for loss factor is used. Half-power bandwidth method and vibration decay method is used in the calculation method for loss factor, and Young's modulus is decided by geometric character and density for specimen and resonance frequency. Vibration measurement sensor is compared by using non-contact displacement detector, velocity detector and accelerometer. This paper is also presented the matter which is able to cause error in the measurement

• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.134-142
• /
• 1997

In this study, we proposed the wire parallel mechanism that can be used to measure a full pose of a robot. It is composed of six parallel links using wire. The position and orientation of the end effectorf of a robot are calculated using the length of wires which is measured by the encoder. The complex non- linear equations of the forward kinematics are solved by using a numerical method, and the unique solution is obtained from the geometric configuration of the device. The length error of the wire which occurs in static condition is compensated by the relational equation that considered longitudinal extension and defoection of the wire. Through this work, we known that the proposed device has a good accuracy( .+-. 0.01mm) in a large measuring region, so it can be used effectively in a callibration of a robot which required a low cost.

• Journal of Information Processing Systems
• /
• 제19권6호
• /
• pp.778-790
• /
• 2023

Although density peak clustering can often easily yield excellent results, there is still room for improvement when dealing with complex, high-dimensional datasets. One of the main limitations of this algorithm is its reliance on geometric distance as the sole similarity measurement. To address this limitation, we draw inspiration from the information bottleneck theory, and propose a novel density peak clustering algorithm that incorporates this theory as a similarity measure. Specifically, our algorithm utilizes the joint probability distribution between data objects and feature information, and employs the loss of mutual information as the measurement standard. This approach not only eliminates the potential for subjective error in selecting similarity method, but also enhances performance on datasets with multiple centers and high dimensionality. To evaluate the effectiveness of our algorithm, we conducted experiments using ten carefully selected datasets and compared the results with three other algorithms. The experimental results demonstrate that our information bottleneck-based density peaks clustering (IBDPC) algorithm consistently achieves high levels of accuracy, highlighting its potential as a valuable tool for data clustering tasks.

• 대한교통학회지
• /
• 제30권5호
• /
• pp.61-69
• /
• 2012

도로기하구조정보는 도로의 유지관리와 안전성 평가 등에 중요한 요소로써, 정보를 취득하려는 구간에 대한 정확한 기하구조정보를 취득하는 작업은 중요하다. 그러나, 도면이 부재하거나 선형의 결함이 발생하는 구간에서는 정확한 자료를 수집하는데 한계가 존재한다. 따라서, 이러한 구간에 도면정보를 신속하게 취득하기 위해 본 연구에서는 GPS-IMU 통합시스템이 장착된 차량에서 취득된 자료를 이용하여 도로기하구조를 측정하였다. 연구결과, 정확도의 기준이 되는 도면 값과 평면선형은 3.38%의 오차율이 나타났으며, 종단선형은 0.083의 절대값 오차가 나타났다. 따라서, 본 연구에서 도출된 결과는 도로안전점검 및 진단과 같은 도로관리업무에 활용될 목적으로 적용이 가능한 것으로 판단된다.

• The Journal of Advanced Prosthodontics
• /
• 제15권1호
• /
• pp.22-32
• /
• 2023

PURPOSE. Digital technology has enabled improvements in the fitting accuracy of denture bases via milling techniques. The aim of this study was to evaluate the trueness and precision of digital and analog techniques for manufacturing complete dentures (CDs). MATERIALS AND METHODS. Sixty identical CDs were manufactured using different production protocols. Digital and analog technologies were compared using the reference geometric approach, and the Δ-error values of eight areas of interest (AOI) were calculated. For each AOI, a precise number of measurement points was selected according to sensitivity analyses to compare the Δ-error of trueness and precision between the original model and manufactured prosthesis. Three types of statistical analysis were performed: to calculate the intergroup cumulative difference among the three protocols, the intergroup among the AOIs, and the intragroup difference among AOIs. RESULTS. There was a statistically significant difference between the dentures made using the oversize process and injection molding process (P < .001), but no significant difference between the other two manufacturing methods (P = .1227). There was also a statistically significant difference between the dentures made using the monolithic process and the other two processes for all AOIs (P = .0061), but there was no significant difference between the other two processes (P = 1). Within each group, significant differences among the AOIs were observed. CONCLUSION. The monolithic process yielded better results, in terms of accuracy (trueness and precision), than the other groups, although all three processes led to dentures with Δ-error values well within the clinical tolerance limit.

• 한국항해항만학회지
• /
• 제29권3호
• /
• pp.269-274
• /
• 2005

현재 국내에서 활발히 이루어지고 있는 GPS 정밀측지측량은 GPS 관측성과가 관측값의 통계적 검증없이 이루어지고 있단 문제점이 있다. 그리고 육지와 해상의 통합지리정보시스템구축을 위한 수치지형도와 수치해도의 통합투영의 필요성이 요구되고 있다. 본 연구를 통하여 GPS 망조정에 사용되는 3점의 기준선에 대한 기하학적인 강도에 따른 정밀도 분석과 분산계수의 변화에 따른 GPS 관측 값들의 정밀도 분석방법으로 GPS 관측값의 정밀도 향상을 위한 방법을 제시하였다. 또한, GPS 관측값의 정밀도를 향상시키는 방법과 수치지도와 전자해도의 통합투영으로 GPS 기준점을 이용한 수지지형도와 수치해도의 경계선 오차량을 비교 검토하여 수치지형도와 수치해도의 통합관리의 방향을 제시하였다. 그리고 이렇게 산출된 GPS 관측결과를 이용하여 EDM 측량결과를 산출하고 수치지형도와 수치해도를 이 정계값들로 맞추었을 때 전체적인 경계점 오차량을 비교 검토하였다.