• Journal of the Korean Data and Information Science Society
• /
• 제8권2호
• /
• pp.261-270
• /
• 1997

This paper is proposed the parametric empirical Bayes(EB) confidence intervals which corrects the deficiencies in the naive EB confidence intervals of the scale parameter in the Weibull distribution under item-censoring scheme. In this case, the bootstrap EB confidence intervals are obtained by the parametric bootstrap introduced by Laird and Louis(1987). The comparisons among the bootstrap and the naive EB confidence intervals through Monte Carlo study are also presented.

• 대한원격탐사학회지
• /
• 제39권6_2호
• /
• pp.1529-1539
• /
• 2023

바다의 색을 관측하여 해양환경을 관측하는 천리안 해양위성 2호(Geostationary Ocean Color Imager-II, GOCI-II)의 자료는 지상국 시스템에서 다양한 보정과정을 거쳐 Raw~Level 2 (L2)로 생산되는데, 각 처리 단계에서 발생하는 품질 정확도는 단계별로 누적되어 위성자료의 오차가 점차 증폭된다. 이에 GOCI-II의 Level-1A/B (L1A/B) 자료에서 발생할 수 있는 광학적 품질 및 위치보정 성능 오차를 측정할 수 있도록 GOCI-II 지상국 시스템을 개선하였다. 신규로 구축된 광학적 품질 및 위치보정 성능 평가 모듈(Radiometric and Geometric Performance Assessment Module, RGPAM)은 시험 운영을 통해 성능 측정, 측정 결과의 표출 및 저장 등 기능들이 정상 운영됨을 확인하였다. RGPAM을 통해 측정된 성능들은 향후 GOCI-II 검출기의 감도 저하에 따른 실시간 복사보정 모델 개선, 위성 L1A/B 자료의 품질 일관성 확인 및 이슈사항에 대한 재보정 방안 마련을 위한 기초자료로 활용될 수 있을 것으로 기대한다.

• 한국산업보건학회지
• /
• 제20권1호
• /
• pp.10-18
• /
• 2010

To provide necessary information for future environmental monitoring of smelting and litharge making industries in Korea, environmental monitoring dataset of air lead concentration of 4 lead industries(1 primary smelting, 2 secondary smelting and 1 litharge making industry) were analyzed from 1994 to 2007. Data were compared using geometric mean and standard deviation with minimum and maximum values according to year of measurement, type of lead industries and type of operation of lead industries. The geometric mean and standard deviation of air concentration for a total of 1140 samples in all lead industries for overall 14 years were 70.7${\mu}g/m^3$ and 5.51 with minimum of 1${\mu}g/m^3$ and maximum of 9,185 ${\mu}g/m^3$. The overall geometric means of air concentration were above the permissible exposure levels(PEL) until year of 2001 and thereafter they were remained at the level of half of PEL. The geometric means of primary smelting, secondary smelting and litharge making industry for overall 14 years were 21.7${\mu}g/m^3$(number of samples: 353), 82.5${\mu}g/m^3$(number of samples: 357) and 164.2 ${\mu}g/m^3$(number of samples: 430) respectively. In primary smelting industry, the highest geometric mean air concentration was 35.4 ${\mu}g/m^3$ in the secondary smelting operation; followed by casting operation (24.9 ${\mu}g/m^3$) and melting operation (14.9 ${\mu}g/m^3$), respectively. On the other hand, in secondary smelting industries, the highest geometric mean air concentration was 125.4${\mu}g/m^3$ in melting operation; followed by casting operation (90.5${\mu}g/m^3$) and pre-treatment operation (43.4${\mu}g/m^3$), respectively. However, in litharge making industries, there were no significant differences of geometric mean air concentrations between litharge operation and stabilizer operation. The proportion of over PEL (50${\mu}g/m^3$) was highest in litharge industry and followed by secondary smelting industries. However The proportions of over PEL(${\mu}g./m^3.$) were decreased by the years of environmental monitoring. The significant reduction of mean air lead concentration since year of 2000 was observed due to more active environmental engineering control and new introduction of new operation in manufacturing process, but may be also influenced by non-engineering method such as reduction of operation hours or reduction of exposure time during actual environmental measurement by industrial hygienist according to more strict enforcement of occupational and safety law by the government.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.355-364
• /
• 2018

본 연구의 목적은 대학생들의 의사소통능력을 향상시키기 위한 프로그램을 개발하기 위한 기초연구로서 도형심리유형과 의사소통능력과의 관계에서 긍정심리자본이 매개할 수 있는지 확인해보는 것이다. 이를 위해 전국의 대학생들 321명을 대상으로 설문조사하였으며 척도의 신뢰도분석, 회귀분석, 경로분석으로 자료를 분석하였다. 회귀분석을 통해 도형심리유형, 긍정심리자본, 의사소통능력의 변수들이 서로 긍정적인 회귀결과로 나타났다. 경로분석을 통해 도형심리 유형과 의사소통능력과의 관계에서 긍정심리자본이 매개역할을 하는 것을 확인하였으며 그 결과는 도형심리의 각 유형에 따라 다른 양상을 보였다. 동그라미 유형은 의사소통능력에 대하여 긍정심리자본의 하위인 복원력을 매개하거나 직접적으로 영향을 미치고 있으며 세모 유형은 의사소통능력에 대하여 긍정심리자본의 하위요인인 자기효능감과 복원력을 매개해 영향을 미치는 것으로 나타났다. 네모 유형은 의사소통능력에 대하여 긍정심리자본의 하위요인인 자기효능감을 매개하거나 직접적으로 영향을 미치고 있으며 에스 유형은 의사소통능력에 대하여 긍정심리자본을 매개하지 않고 직접적으로만 영향을 미치는 것으로 나타났다. 따라서 대학생들을 위한 의사소통향상프로그램을 개발하기 위해서는 위와 같은 결과를 고려하여 도형심리유형별로 긍정심리자본이 적용된 프로그램을 개발할 수 있을 것이다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.471-474
• /
• 2007

On the road, geometric structure such as horizontal alignment, vortical alignment and crossing inclination ate important to explain characteristics of road and safety analysis. Especially, horizontal and vortical alignment are have to do with safety of covering. In existing road, for the safety analysis or alignment improvement and expansion pavement, it needs alignment factor of road. Alignment factor of road can be acquired by design drawing. But, design drawing can be not exist because of rack of facility management and national policy that centered to construction. And also, existing design drawing have a lot of differences in comparison with another existing design drawing cause of alignment improvement. In this case, for the precise analysis of alignment, 3-dimensional location information on the road centerline and acquisition of location information which related geometric structure are must to be preceded. In this study, therefore, it provide alignment factors which needed to alignment improvement and road safety analysis by acquisition of road space information and extraction of road centerline data using LiDAR data.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.47-51
• /
• 2005

Using satellite images, an optimal solution to water motion has been presented in this study. Since temperature patterns are suitable tracers in water motion, Sea Surface Temperature (SST) images of Caspian Sea taken by MODIS sensor on board Terra satellite have been used in this study. Two daily SST images with 24 hours time interval are used as input data. Computation of templates correspondence between pairs of images is crucial within motion algorithms using non-rigid body objects. Image matching methods have been applied to estimate water body motion within the two SST images. The least squares matching technique, as a flexible technique for most data matching problems, offers an optimal spatial solution for the motion estimation. The algorithm allows for simultaneous local radiometric correction and local geometrical image orientation estimation. Actually, the correspondence between the two image templates is modeled both geometrically and radiometrically. Geometric component of the model includes six geometric transformation parameters and radiometric component of the model includes two radiometric transformation parameters. Using the algorithm, the parameters are automatically corrected, optimized and assessed iteratively by the least squares algorithm. The method used in this study, has presented more efficient and robust solution compared to the traditional motion estimation schemes.

• 한국정밀공학회지
• /
• 제19권10호
• /
• pp.99-106
• /
• 2002

This paper proposes an error compensation method that improves accuracy with geometry information of injection molding parts. Geometric information can give an improved accuracy in reverse engineering. Measuring data can not lead to get accurate geometric model, including errors of physical parts and measuring machines. Measuring data include errors which can be classified into two types. One is molding error in product, the other is measuring error. Measuring error includes optical error of laser scanner, deformation by probe forces of CMM and machine error. It is important to compensate these in reverse engineering. Least square method (LSM) provides the cloud data with a geometry compensation, improving accuracy of geometry. Also, the functional shape of a part and design concept can be reconstructed by error compensation using geometry information.

• 한국가시화정보학회지
• /
• 제18권2호
• /
• pp.18-27
• /
• 2020

Air lift pump operated by buoyancy is mainly used for the continuous circulation and the purification of fluids. In this study, the computational flow analysis has been performed with the geometric and operating conditions of the air lift pump. The numerical data from the analysis have been verified by comparing with the previous experimental data. The following results are obtained which advance the efficiency of the air lift pump. As the submergence length of pipe increases and the pipe length over the water surface decreases, the non-dimensional mass flow ratio increases in both cases. When the position of the air injection hole is within the pipe, the circulation range of the surrounding fluid becomes widened with the distance between the air injection hole and the pipe inlet relatively becoming narrower. It is more efficient both when the air injection velocity is at 10 m/s and at 15 m/s, and when the diameter of the pipe with holes is doubled near the water surface. It is expected that these results can be provided as fundamental data for operating the air lift pump.

• ETRI Journal
• /
• 제11권1호
• /
• pp.109-122
• /
• 1989

We developed new quadtree and octree representation schemes which reduce the storage requirements from exponential to polynomial. The new schemes not only lessen the large storage requirements of the existing quadtree and octree representation schemes but guarantee an exact representation of the original object. These are made possible by adopting a new set of termination conditions that ensure finiteness of the quadtree and octree during the decomposition. These new data structures are analyzed theoretically and tested empirically. For space complexity, we analyzed its best case, worst case, and average case. Given an $n_e$-gon, we show that the expected number of nodes in our quadtree isO($$$n_e^1.292$) For a polyhedron with $n_f$ faces, the expected number of nodes in the new octree is O($$$n_f^1.667$). For time complexity, we again analyzed the best, worst, and average cases for constructing such quadtree and octree and find the average to be the same as those of the space complexity. Finally, random $n_e$- gons are generated as test data. Regression equations are fitted and are shown to support the claims on the average case performance.

• 한국CDE학회논문집
• /
• 제14권5호
• /
• pp.291-296
• /
• 2009

This paper presents a post-processing algorithm for 5-axis machines with three rotary axes (3R-2L type). 5-axis machining needs the postprocessor for converting cutter location (CL) data to machine control (NC) data. The existing methods for post-processing use inverse kinematics equations from for-ward kinematics. However in case of 5-axis machines with three rotary axes, the inverse kinematics equations are not induced directly since the forward kinematics equations are non-linear. In order to get the joint values from the forward kinematics equations, previous algorithms use numerical method for the post-processing, which needs searching algorithms with computation time and may result in fail. This paper proposes a geometric method for the post-processing of 3 rotary type 5-axis machines. Our algorithm has three advantages: first, it does not need establishing forward kinematics equations. Second, it is reliable method that eliminates any numerical methods for the inverse kinematics, resulting in the exact solution. Finally, the proposed algorithm can also be applied to 2R-3L type of 5-axis machines.