Browse > Article
http://dx.doi.org/10.5407/jksv.2020.18.2.018

Computational Flow Analysis with Geometric and Operating Conditions of Air Lift Pump  

Kang, Geonhan (Department of Mechanical Engineering, Graduate School, Sunchon National University)
Kim, Sungcho (School of Mechanical and Aerospace Engineering, Sunchon National University)
Choi, Jongwook (School of Mechanical and Aerospace Engineering, Sunchon National University)
Publication Information
Journal of the Korean Society of Visualization / v.18, no.2, 2020 , pp. 18-27 More about this Journal
Abstract
Air lift pump operated by buoyancy is mainly used for the continuous circulation and the purification of fluids. In this study, the computational flow analysis has been performed with the geometric and operating conditions of the air lift pump. The numerical data from the analysis have been verified by comparing with the previous experimental data. The following results are obtained which advance the efficiency of the air lift pump. As the submergence length of pipe increases and the pipe length over the water surface decreases, the non-dimensional mass flow ratio increases in both cases. When the position of the air injection hole is within the pipe, the circulation range of the surrounding fluid becomes widened with the distance between the air injection hole and the pipe inlet relatively becoming narrower. It is more efficient both when the air injection velocity is at 10 m/s and at 15 m/s, and when the diameter of the pipe with holes is doubled near the water surface. It is expected that these results can be provided as fundamental data for operating the air lift pump.
Keywords
Air Lift Pump; Computational Flow Analysis; Two Phase Flow; Pipe Flow;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Lee, C. H., Park, J. W., and Ahn, K. H., 2014, "Micro-Bubble Generating Properties on Gas/Liquid Flow Rate Ratio with Sludge Flotation/ Thickening Apparatus," Journal of Environmental Science International, Vol.23(1), pp.97-104.   DOI
2 Kim, S. H., Sohn, C. H., and Hwang, J. Y., 2013, "Experimental Study of Performance and Bubble Pattern of Air-Lift Pumps with Various Tube Diameters and Submergence Ratio," Transactions of the Korean Society Mechanical Engineers-B, Vol.37(9), pp.837-845.   DOI
3 Lee, B. R., Jang, Y. J., Ko, M. S., Lee, B. A., Lee, Y. G., and Kim, S., 2013, "Vertical Upward Air-Water Two-Phase Flow Regime Identification," Journal of Energy Engineering, Vol.22(4), pp.362-369.   DOI
4 Todoroki, I., Sato, Y., and Honda, T., 1973, "Performance of Air-Lift Pump," Bulletin of the JSME, Vol.16(94), pp.733-741.   DOI
5 Khalil, M. F., Elshorbagy, K.A., Kassab, S. Z., and Fahmy, R. I., 1999, "Effect of Air Injection Method on the Performance of an Air Lift Pump," International Journal of Heat and Fluid Flow Vol.20, pp.598-604.   DOI
6 Li, X. S., Jeong, H. M., and Chung, H. S., 2012, "CFD Modeling of Unsteady Gas-Liquid Flow in a Small Scale Air-Lift Pump," Journal of the Korean Society for Power System Engineering, Vol.16(1), pp.30-37.
7 Kim, Y. C., Choi, J. W., and Kim, S. C., 2015, "Analysis of Heat Transfer Performance with Aspect and Filling Ratios in Thermosyphon," Journal of Computational Fluids Engineering, Vol.20(1), pp.92-98.   DOI