• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.284-289
• /
• 2016

In recent years, the earthquake sequence in Christchurch, New Zealand (NZ) was unprecedented in terms of repeated earthquake shocks with substantial levels of ground motion affecting modern infrastructure, and in particular, broad and precise reports for liquefaction-induced permanent ground deformation (PGD) and repairs of wastewater (WW) pipelines were collected. In this study, a geographical information system (GIS) and linear regression analysis were performed using data for the length and repair points of earthenware (EW) and concrete (CONC) wastewater pipelines acquired after the MW 6.2 February 22, 2011 earthquake. The repair rates (repairs/km) for the EW and CONC wastewater pipelines were evaluated inside the areas of PGD, and both angular distortion of ground and lateral ground strain were calculated from the high resolution LiDAR data acquired before and after the seismic event. The research results showed that both pipelines have similar trends of damage but the CONC wastewater pipeline with higher stiffness showed less damage. The results of linear regression analyses can be used to predict the repair rates for EW and CONC wastewater pipelines inside the areas of PGD induced by future earthquakes.

• Journal of Internet Computing and Services
• /
• v.5 no.2
• /
• pp.75-84
• /
• 2004

Geocasting, a variant of the conventional multicasting problem, is one of communication type in which the data packets are delivered to a group of all nodes within a specified geographical region (i.e., the geocasting region) and is called location-based multicasting(LBM)(l). An Ad-hoc network is a dynamically reconfigurable and temporary wireless network where all mobile devices using batteries as energy resources cooperatively maintain network connectivity without central administration or the assistance of base stations. Consequently, the technique to efficiently consume the limited amounts of energy resources is an important problem so that the system lifetime is maximized. In this paper, we propose a LBPA(Location-Based Power Aware) geocasting algorithm that selects energy-aware neighbor to route a packet towards the target region In Ad-hoc network environments. The method Is such that the energy consumption is balanced among the nodes in proportion to their energy reserves. Through the simulations, the proposed LBPA algorithm shows better results, that is, as good as 40% on the average over the conventional LBM algorithm in terms of the network lifetime.

• Journal of Advanced Navigation Technology
• /
• v.17 no.5
• /
• pp.484-490
• /
• 2013

With the rapid development of wireless communication at VHF and UHF bands, there is an increasing need for the reliable propagation prediction tools. Therefore, the different propagation models that have been developed in many countries as well as korea has been trying to secure a model suitable for their geographical area but then it is giving us a different result when we compared it to measured values. In this paper, based on the measurements of DTV broadcasting services in domestic urban area, analysis and comparison of ITU-R P.1546 and BCAST models provide errors between measured and predicted values, and some points for improving SMI system has been proposed. As a result, P.1546 model provides the valid predicted data similar to measured data, but BCAST model has some problems of large deviation and higher prediction to measured data. In future, these problems and diffractions due to high buildings need to be studied further.

• Journal of People, Plants, and Environment
• /
• v.24 no.1
• /
• pp.39-51
• /
• 2021

Background and objective: Urban topology can be characterized as impervious, which changes the hydrologic features of an area, increasing surface water flow during local heavy rain events. The pluvial flooding is also influenced by the vertical structures of the urban area. This study suggested a modified digital elevation model (DEM) to identify changes in urban hydrological conditions and segmentalized urban micro catchment areas using a geographical information system (GIS). Methods: This study suggests using a modified DEM creation process based on Rolling Ball Method concepts along with a GIS program. This method proposes adding realized urban vertical data to normal DEM data and simulating hydrological analyses based on RBM concepts. The most important aspect is the combination of the DEM with polygon data, which includes urban vertical data in three datasets: the contour polyline, the locations of buildings and roads, and the elevation point data from the DEM. DEM without vertical data (DCA) were compared with the DEM including vertical data (VCA) to analyze catchment areas in Shin-wol district, Seoul, Korea. Results: The DCA had 136 catchments, and the area of each catchment ranged from 3,406 m² to 423,449 m². The VCA had 2,963 catchments, with the area of each ranging from 50 m² to 16,209 m². The most important finding is that in the overlapped VCA; the boundary of areas directly affected by flooding and the direction of surface water flow could be identified. Flooding data from September 21, 2010 and July 27, 2011 in the Shin-wol district were applied as ground reference data. The finding is that in the overlapped VCA; the boundary of areas directly affected by flooding and the direction of surface water flow could be identified. Conclusion: The analysis of the area vulnerable to surface water flooding (SWF) was more accurately determined using the VCA than using the DCA.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3B
• /
• pp.241-251
• /
• 2006

This study analyzed the topographical characteristics by extracting property factors of stream (stream order, number of stream, stream length, mean stream length) and property factors of basin (basin area, basin length, total stream length, total number of stream, basin mean width, form factor, maximum stream order, basin density, stream frequency, relief ratio, mean elevation, mean, slope, maximum elevation) from DEM (digital elevation model) and stream network generated by 1:5,000 NGIS (national geographical information system) data for the Bukhan-river basin. In addition, topographical factors for upper, mid stream and lower stream were analyzed and the mutuality of the factors by linear and nonlinear regression curve was identified.

• Survey Research
• /
• v.10 no.3
• /
• pp.1-19
• /
• 2009

This study investigates the utilities of spatial analysis in the context of survey research using Geographical Information System(GIS) and Geographically Weighted Regression (GWR) which take account of spatial heterogeneity. Many social phenomena involve spatial dimension, and with the development of GIS, GPS receiver, and online location-based services, spatial information can be collected and utilized more easily, and thus application of spatial analysis in the survey research is getting easier. The traditional OLS regression models which assume independence of observations and homoscedasticity of errors cannot handle spatial dependence problem. GWR is a spatial analysis technique which utilizes spatial information as well as attribute information, and estimated using geographically weighted function under the assumption that spatially close cases are more related than distant cases. Residential survey data from a Primary Autonomous District are used to estimate a model of public service satisfaction. The findings show that GWR handles the problem of spatial auto-correlation and increases goodness-of-fit of model. Visualization of spatial variance of effects of the independent variables using GIS allows us to investigate effects and relationships of those variables more closely and extensively. Furthermore, GIS and GWR analyses provide us a more effective way of identifying locations where the effect of variable is exceptionally low or high, and thus finding policy implications for social development.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.4
• /
• pp.86-92
• /
• 2002

The feasibility of counting number of small vessels and position in Korean waters using the panchromatic imageries derived from the IRS-1C was tested. The parameters for interpretation of satellite's imageries of small vessels were location(position), size, shape, shadow, tone, texture and pattern, height and depth, situation and association with other vessels. The position of small vessels in the sea without GCP(ground control point) was considered to be inclusive in the satellite imagery with 35 km semi-diameter, denoting rough geographical position of the vessel. The size of vessel was measured by length from stem to stern of the vessel, distinguished by following wave on the surface water. Offshore fishing vessels were separated from merchant ships by their length smaller than 100 m. The shape of vessels on panchromatic imagery of IRS-1C appeared just streamline. In case of clouds which were similar to the shape of small vessels, we were able to distinguish between vessel and cloud by shadow of cloud in the water surface. The tone of sea surface was dark black while small vessel appeared bright white. Small vessel was distinguished from the rough texture of the sea surface and the regular pattern of the waves with white capes when weather was not so good. The situation of the fishing activity was estimated by information of fishing method related to the fishing boat such as the pair trawl in the Yellow Sea.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.1 no.2
• /
• pp.44-55
• /
• 1998

This study was carried out to investigate the feasibility of OTEC(Ocean Thermal Energy Conversion) operation, in the East Sea of Korea. Accumulated cruise data of NFRDI (National Fisheries Research and Development Institute) over the period 1966~1995 were used to locate appropriate spot by season as well as by latitude which would show the difference at least $15^{\circ}C$ or more between the surface layer and each depth of 50, 100, 150, 200, 250, 300, 400 and 500m. Our results showed that the coastal areas of Pohang city met the requirement of more than $20^{\circ}C$ difference for OTEC plant from August to October. In contrast, in case that $15^{\circ}C$ would be possible thermal difference to operate OTEC plant, most coastal areas in the East Sea including Pohang from June to December are potential candidates for this future energy source. Therefore, we present in this paper the first option to locate the best place for OTEC plant operation using Geographical Information System (GIS), which is currently used for multi-dimensional space analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.1050-1061
• /
• 2009

The Tactical Internet(TI) managed by Infantry Brigades is used for the purpose of sharing information of Command Control and Situation Awareness. When there are more than two destinations to transmit data in the TI system, a multicasting is utilized based on pre-defined multicast groups. However even in the case when a source node needs to send some messages like weathercast and attack alarm etc to only a part of Battalion or Brigades in a specific geographical region (destination region), the current TI multicasting protocol is designed to transmit the messages to the pre-defined group or all of the Battalion/Brigade nodes, resulting in inefficiency in terms of end-to-end delay and overhead. In this paper, we propose more efficient protocol for such cases, named as "Tactical Internet Geocasting (TIG)". The proposed scheme firstly checks whether the destination region belongs to one Battalion region or more than two Battalion regions using location information, and then performs a greedy forwarding from the source node to the destination region, followed by a local flooding inside of the destination region. With performance analysis and simulations using NS-2, TIG is compared to the current TI multicasting protocol (i.e., Simplified MDP) and the LBM (Location-based Multicast). The simulation results show that the proposed TIG is more efficient than both in terms of delay and network overhead.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.23-35
• /
• 2012

The optimum location of the prehistoric sites of Ulsan Metropolitan City are investigated by both quantile and natural breaks methods through GIS, and the settlement pattern is studied based on the possibility of presence of the prehistoric sites which are also analyzed with these methods. Such factors including elevation, slope, distance from the nearest water, aspect, geological features, soil drainage classes, subsoil and land use recommended are employed in the analysis. The optimum geographical environment is the place where it includes the water-base in the area that is the southern aspect of the gentle slope land of lowland. The geology is the Quaternary alluvium. The drainage class is fine and the deep soil saturn is the fine loamy soil and the recommendation of land use is the area that is the field. As a result of the forecast of distribution, the prehistoric sites showed the higher possibility of presence in the downstream region where the Taehwa river and Dongcheon river join because the region come close to the watercourse and the drinking water use is easy. And the aspect and elevation is the low area. The alluvium accumulated from the upper stream of the Taehwa river and Dongheon river was made roomily, the area where is suitable for the farming life. Therefore, this region is judged that the possibility of presence of the prehistoric sites is high.