• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.3
• /
• pp.29-40
• /
• 2012

The method regarding obtaining various kinds of attribute data of spatial information, including that of digital map, is normally restricted to Geographic survey that deals with in-field surveys. Geographic surveying for drawing digital map, however, require much effort due to the fact that a surveyor has to characterize geographic features individually in the field. Not only does the Geographic survey cover large area, but also its need for manual drawing and surveying using Draft map makes it more expensive and time-consuming. Though some recent Geographic surveys take advantage of MMS(Mobile Mapping System) to collect computerized information, there are inevitable limits in creating digital map with such data. This research will analyze the problems in current Geographic surveys and suggest adequate methods and standards for Geographic surveys by researching the methods of domestic/international service organizations that deal with establishing spatial information. This study therefore will aim to enhance the efficiency of creating digital map and Geographic survey, which would ultimately maximize the applicability of pan-national digital map by improving reliability of digital map and upgrading the utilizability of Geographic survey data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.487-493
• /
• 2014

A geographic survey, which requires much of working hours in the digital mapping process, is consisted with the complementary survey and the attribute survey of topography and topographic features, and depended on the field survey. In previous research, using the location-based image had been recommended for diminishing the workload of field survey and post processing. For this research, we have developed the hardware and software for gathering and processing the location-based images with referencing results from the previous research. Those Geographic surveys were performed using developed system on 1/5,000 map sheets for Si and Gun area, respectively. The results have been evaluated as the mobile geographic survey system were able to replace the large part of field survey, and also the working hours were decreased by 37.5% at Si area. However, the complementary survey was needed for the attributes of topography and topographic features that were occluded by the parked vehicles or located in the areas without entry of vehicles.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.2 s.32
• /
• pp.71-77
• /
• 2005

Digital maps that art the primitive components for GIS has been increasingly used for various applications. Although their production processes has been noticeably improved, particularly, the geographic survey and structural editing processes still depends on the traditional process depending on maps printed on papers. This study thus proposes a new efficient method employing a computerized filed survey system into these processes. We applied this method to producing a digital map ver 2.0 and compare the results nth those based on the existing method. From this comparison analysis, it is shown that the proposed method saves about 5% from the overall cost by reducing the man power and processing steps required for digital map production.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.479-484
• /
• 2004

It is the present situation that the relevant data with the compensation and payment is filed and managed in the form of document or Excell. In case of the large volume dam construction, the management of the data about the sinking areas is conducted inefficiently in view of time management and economy through using the administrative manpower and data formating manpower. There is also problem about where and how to keep the data owing to the enormous data. As a result of the raised questions, through constructing the system which is linked with the location information and property information which is relevant to the compensation to increase the applying value of the information about the compensation and apply document management system to the geographic information system, the management system through computerizing for searching the uncompensated areas in appropriate areas and compensation information in the compensated areas is projected. Through constructing geographic information system, it is expected to create various information effects, using the function of the necessary area search for the boundary survey, actual condition survey, uncompensated area search, and re-compensated area search.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.4
• /
• pp.22-33
• /
• 2006

The objective of this paper is to discuss geographic information policies and strategies of British government and suggest effective policies for Korea National GIS project GIS that has been implemented geographic information infrastructures into public sectors and private markets for the last ten years. To obtain the research aim, this paper reviews the main factors of the Britain GIS project such as distribution structure and process of GI markets, government policies and strategies that are led by Ordnance Survey, most leading mapping agency in the UK. In conclusion, some issues have been explored with reference to the experiences of the Britain GIS projects. The first of these is the nature of geographic information and the second concerns the notion of the circulation policies of spatial data, and the last proposes Korea GIS policies and strategies for successful geographic information and spatial data implementation. The findings of the analysis of the Britain GIS development indicate that a shift began to take place from central government coordinate toward more extensive utilization of private and commercial sectors. This reflects both the increasing importance of geospatial data circulation in all levels of GIS stakeholders. Finally these discussions are particularly to be the issues where multi-agency collaboration of Korea government is concerned and can take the form of joint ventures by consortiums of both involving data producers and data users in order to increase commercial participation for value-added geospatial items, and to encourage both research and development sectors with low or free price policies.

• Journal of Environmental Health Sciences
• /
• v.45 no.5
• /
• pp.487-496
• /
• 2019

Objective: The purpose of this study was to create soil contamination maps using QGIS (Quantum Geographic Information System) and suggest selection methods for soil pollution sources for preferential investigation in a soil contamination survey. Method: Data from soil contamination surveys over five years in Gyeonggi-do Province, South Korea (2013-2017) were used for making soil contamination maps and analyzing the density of survey points. By analyzing points exceeding the concern level of soil contamination, soil pollutant sources for priority management were identified and selection methods for preferred survey points were suggested through a study of the model area. Results: A soil contamination survey was conducted at 1,478 points over five years, with the largest number of surveys conducted in industrial complex and factory areas. Soil contamination maps for copper, zinc, nickel, lead, arsenic, fluoride, and total petroleum hydrocarbons were made, and most of the survey points were found to be below concern level 1 for soil contamination. The density of the survey points is similar to that of densely populated areas and factory areas. The analysis results of points exceeding the criteria showed that soil pollutant sources for priority management were areas where ore and scrap metals were used and stored, traffic-related facilities areas, industrial complex and factory areas, and areas associated with waste and recycling. According to the study of the model area, the preferred survey points were traffic-related facilities with 15 years or more since their construction and factories with a score of 10 or more for soil contamination risk. Conclusion: Soil contamination surveys should use GIS for even regional distribution of survey points and for the effective selection of preferred survey points. This study may be used as guidelines to select points for a soil contamination survey.

• Journal of Ecology and Environment
• /
• v.41 no.4
• /
• pp.114-119
• /
• 2017

This study tried to analyze error range and resolution of drone images using a rotary wing by comparing them with field measurement results and to analyze stands patterns in actual vegetation map preparation by comparing drone images with aerial images provided by National Geographic Information Institute of Korea. A total of 11 ground control points (GCPs) were selected in the area, and coordinates of the points were identified. In the analysis of aerial images taken by a drone, error per pixel was analyzed to be 0.284 cm. Also, digital elevation model (DEM), digital surface model (DSM), and orthomosaic image were abstracted. When drone images were comparatively analyzed with coordinates of ground control points (GCPs), root mean square error (RMSE) was analyzed as 2.36, 1.37, and 5.15 m in the direction of X, Y, and Z. Because of this error, there were some differences in locations between images edited after field measurement and images edited without field measurement. Also, drone images taken in the stream and the forest and 51 and 25 cm resolution aerial images provided by the National Geographic Information Institute of Korea were compared to identify stands patterns. To have a standard to classify polygons according to each aerial image, image analysis software (eCognition) was used. As a result, it was analyzed that drone images made more precise polygons than 51 and 25 cm resolution images provided by the National Geographic Information Institute of Korea. Therefore, if we utilize drones appropriately according to characteristics of subject, we can have advantages in vegetation change survey and general monitoring survey as it can acquire detailed information and can take images continuously.

• The Korean Journal of Ecology
• /
• v.19 no.5
• /
• pp.465-476
• /
• 1996

There are several environmental variables that may be influential to the spatial distribution of forest vegetation. To create a map of forest vegetation zone over southern part of Korean Peninsula, digital map layers were produced for each of environmental variables that include topography, geographic locations, and climate. In addition, an extensive set of field survey data was collected at relatively undisturbed forests and they were introduced into the GIS database with exact coordinates of survey sites. Preliminary statistical analysis on the survey data showed that the environmental variables were significantly different among the previously defined five forest vegetation zones. Classification of the six layers of digital map representing environmental variables was carried out by a supervised classifier using the training statistics from field survey data and by a clustering algorithm. Although the maps from two classifiers were somewhat different due to the classification procedure applied, they showed overall patterns of vertical and horizontal distribution of forest zones. considering the spatial contents of many ecological studies, GIS can be used as an important tool to manage and analyze spatial data. This study discusses more about the generation of digital map and the analysis procedure rather than the outcome map of forest vegetation zone.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.527-536
• /
• 2020

International business research presents a broad consensus on the importance of dynamic capabilities in the internationalization of SMEs. However, there is a lack of research on assessing the impact of dynamic capabilities and the level of SMEs' internationalization operating in a turbulent and dynamic business environment. This study examines the impact of environmental dynamism and three sets of dynamic capabilities, namely, sensing, seizing, and reconfiguring capabilities on internationalized SMEs' geographic scope. In addition, this research examines the association between internationalized SMEs' characteristics: SME's age, size, and SME owner/manager's international experience and SMEs' geographic scope. This study used a quantitative research and employed survey questionnaires to collect data from 305 internationalized Malaysian manufacturing SMEs. Anova tests and Chi Square tests were employed to analyze data collected from respondents using SPSS. Research findings revealed that environmental dynamism and dynamic capabilities have a significant impact on internationalized SMEs' geographic scope, however, none of the internationalized SMEs' characteristics had a significant relationship with their geographic scope. The result of this research suggest internationalized SMEs owner/managers need to possess sensing, seizing and reconfiguring capabilities, and monitor business environmental dynamism to increase their geographic scope. This paper ends with drawing a set of concluding remarks and recommendations.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.134-142
• /
• 2005

In building geographic information for North Korea, we proposed the method of using SPOT-5 image, designed geographic information layers, and inspected the location accuracy. Basically this study is similar to existing method in which uses GCPs to build geographic information from SPOT-5 satellite imagery. However, this study adopted a different method of GCP acquisition. The GCP used in this study is a triangulation point which was made at Japanese imperialism eras. The location accuracy error was 8.755 meters horizontally, which satisfied the tolerance of 17.5 meters in the 1:25,000 scale public survey guidance. In conclusion, we suggest that geographic information for North Korea can be built from SPOT-5 images with the triangulation point made in Japanese imperialism times.