• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.1
• /
• pp.73-81
• /
• 2010

In recent years, there have been diverse researches and utilizations of creating geo-spatial information with high resolution satellite images. However thematic maps made with middle or low resolution satellite images have low location accuracy and precision of thematic information. This study set out to propose a method of making a precision thematic map with high resolution satellite images by examining the conversion from the conventional method based on middle or low resolution satellite images to the automatic method based on high resolution satellite images of GSD 1m or lower, extracting thematic information of middle or large scale of 1/5,000 or lower, and analyzing its accuracy. Seven classification classes were categorized according to the object-oriented classification in order to automatically extract thematic information with high resolution satellite images. And the classification results were compared and analyzed with the old middle scale land cover map and 1/1000 digital map.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.507-516
• /
• 2007

Segmentation and organization of the LiDAR (Light Detection and Ranging) data of the Earth's surface are difficult tasks because the captured LiDAR data are composed of irregularly distributed point clouds with lack of semantic information. The reason for this difficulty in processing LiDAR data is that the data provide huge amount of the spatial coordinates without topological and/or relational information among the points. This study introduces LiDAR data segmentation technique by utilizing histograms of the LiDAR height image data and analyzing roof shape for 3D reconstruction and visualization of the buildings. One of the advantages in utilizing LiDAR height image data is no registration required because the LiDAR data are geo-referenced and ortho-projected data. In consequence, measurements on the image provide absolute reference coordinates. The LiDAR image allows measurement of the initial building boundaries to estimate locations of the side walls and to form the planar surfaces which represent approximate building footprints. LiDAR points close to each side wall were grouped together then the least-square planar surface fitting with the segmented point clouds was performed to determine precise location of each wall of an building. Finally, roof shape analysis was performed by accumulated slopes along the profiles of the roof top. However, simulated LiDAR data were used for analyzing roof shape because buildings with various shapes of the roof do not exist in the test area. The proposed approach has been tested on the heavily built-up urban residential area. 3D digital vector map produced by digitizing complied aerial photographs was used to evaluate accuracy of the results. Experimental results show efficiency of the proposed methodology for 3D building reconstruction and large scale digital mapping especially for the urban area.

• Korean System Dynamics Review
• /
• v.9 no.1
• /
• pp.5-31
• /
• 2008

Korean administrative jurisdiction has changed from separation to integration system, without definite raison d'etre from the effectiveness dimension. It partially comes from the fact that the top priority of most existing documents has given to the behavioral patterns of key variables during specific time periods. As an alternative approach, this study focuses on dynamic analysis on the long-term structural patterns related to urban-rural integration issues. Specifically, it pays attention to unique experiences between two neighboring administrative authorities, namely Cheongju and Cheongwon, all of which have repeated exceptional confrontations between pros and cons over almost two decades. From the theoretical perspectives, this observes structural similarities and differences between separation and integration approaches and compares individual feedback loops in order to examine urban-rural integration effectiveness. Structurally, if the integrated local authority adopts systematic management and balanced territorial development principles, it would gain the highest positive effect of urban-rural integration. After scenario buildings, it analyzes administrative integration dynamics between Cheongju and Cheongwon, highlighting geo-political conditions, key issues, and implementation plans between two administrative authorities. It expects that the integrated jurisdiction as a whole would increase the urban attractiveness as it can facilitate territorial development plans from macro-level. Furthermore, if the integrated authority keeps balanced territorial principles, which would be well reflected in the mutual agreement between two administrative units, it would also guarantee the increased urban attractiveness in the integrated jurisdiction. Nonetheless, compared to Cheongwon, which might be wider open to the location of NIMBY facilities, it would be more difficult for Cheongju to pay attention to territorial development confined to its original jurisdiction in the short run.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.79-86
• /
• 2010

This research is a thing about reverse operation about the solar power for location decision and increasing efficiency of the solar power generation equipments. The purpose of this research is reverse operation about the amount of sunshine using the climate and spatial elements. Following the result of correlation analysis, the wind-speed and cloud-amount factor are excluded, because the correlation and significance coefficients are out of value. Each outcome of regression analysis using the other four climate elements, and regression analysis using spatial elements is what the amount of sunshine and the solar altitude are the most influence to the insolation-modeling. Doing the regression analysis based on the precedent result make the result that climate elements have bigger coefficient of regression than spatial elements. This outcome means the climate elements are more influence than spatial elements.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.18 no.4
• /
• pp.161-170
• /
• 2014

Newmark-type deformation analysis has rarely been done in Korea due to the popularity of simple pseudo-static limit equilibrium analysis and detailed time-history FE/FD dynamic analysis. However, the Korean seismic dam design code updated in 2011 prescribes Newmark-type deformation analysis as a major dynamic analysis method for the seismic evaluation of fill dams. In addition, a design PGA for dynamic analysis is significantly increased in the code. This paper aims to study the seismic evaluation of four existing large fill dams through advanced FEM/Newmark-type deformation analyses for the artificial earthquake time histories with the design PGA of 0.22g. Dynamic soil properties obtained from in-situ geo-physical surveys are applied as input parameters. For the FEM/Newmark analyses, sensitivity analyses are performed to study the effects of input PGA and $G_{max}$ of shell zone on the Newmark deformation. As a result, in terms of deformation, four fill dams are proved to be reasonably safe under the PGA of 0.22g with yield coefficients of 0.136 to 0.187, which are highly resistant for extreme events. Sensitivity analysis as a function of PGA shows that $PGA_{30cm}$ (a limiting PGA to cause the 30 cm of Newmark permanent displacement on the critical slip surface) is a good indicator for seismic safety check. CFRD shows a higher seismic resistance than ECRD. Another sensitivity analysis shows that $G_{max}$ per depth does not significantly affect the site response characteristics, however lower $G_{max}$ profile causes larger Newmark deformation. Through this study, it is proved that the amplification of ground motion within the sliding mass and the location of critical slip surface are the dominant factors governing permanent displacements.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.83-92
• /
• 2007

In this paper, we present a design and implementation of three dimensional pointing device using Inertial Navigation System(INS) that acquires coordinates and location information without environmental dependancy. The INS measures coordinates based on the data from gyroscope and accelerometer and corrects the measured data from accelerometer using Kalman-Filter. In order to implement the idea of three dimensional pointing device, we choose a three dimensional Space-recognition mouse and use RFIC wireless communication to send a measured data to receiver for printing out the coordinate on display equipment. Based on INS and Kalman-Filter theoretical knowledge, we design and implement a three dimensional pointing device and verified the usability as an input device that can capture a human's move. also, we describe the applicability of this device in ubiquitous computing environment.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.395-400
• /
• 2006

Among the various error sources in positioning and navigation, the paper focuses on the modeling and prediction of receiver clock bias and then tries to achieve positioning based on simulated and predicted clock bias. With the SA off, it is possible to model receiver clock bias more accurately. We selected several types of GNSS receivers for test using ARMA model. To facilitate prediction with short and limited sample pseudorange observations, AR and ARMA are compared, and the improved AR model is presented to model and predict receiver clock bias based on previous solutions. Our work extends to clock bias prediction and positioning based on predicted clock bias using only 3 satellites that is usually the case under urban canyon situation. In contrast to previous experiences, we find that a receiver clock bias can be well modeled using adopted ARMA model. Test has been done on various types of GNSS receivers to show the validation of developed model. To further develop this work, we compare solution conditions in terms of DOP values when point positioning is conducted using 3 satellites to simulate urban positioning environment. When condition allows, height component is derived from other ways and can be set as known values. Given this condition, location is possible using less than 2 GNSS satellites with fixed height. Solution condition is also discussed for this background using mode of constrained positioning. We finally suggest an effective predictive time span based on our test exploration under varied conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4228-4236
• /
• 2015

Due to the rapid advance in web and mobile computing technologies, normal users have become to produce, provide, and share a varied form of spatial data and information. In the domain of spatial information, numerous researches on GIS have been conducted to provide spatial information services based on a geo-sensor network and a data integration and processing technology. However, to provide user-oriented information, a context information model is necessary to associate GIS data with web and sensor data. Context awareness services is designed to provide specific information, minimizing users' interference. For which, the context information model expresses the relationship of various data from sensor networks and mobile applications and provides a user-specific information considering location and area of interest. Thus, this research aims to develops a context information model based air-pollution information system that obtains and analyses air pollution data and reflects the analysis results on an air-pollution policy. Also, this system aims to raise citizens' awareness on air-pollution and to promote citizens' participatory to improve city's air quality.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1489-1494
• /
• 2013

Tsunami happens rarely enough to allow a false sense of security, but when they do occur, there may be just minutes or hours for people to reach a safe location. Natural disasters like tsunami are inevitable and it is almost impossible to fully recoup damages caused by the disasters. However, it is possible to minimize the potential risk by developing early warning strategies. GIS modelling with its geoprocessing and analysis capability can play a crucial role in efficient mitigation and management of disaster. This study aims at developing integrated spatial information system processing model supporting tsunami evacuation action planning using geo-information technology such as GIS. The integration process classified into four phases. And in each phase, required input data and GIS processes are decided. The main effort in minimizing casualties in tsunami disaster is to evacuate people from the hazard area before tsunami strikes by means of either horizontal or vertical evacuation. The study provides essential spatial information for local decision making related with people's evacuation in tsunami-prone areas based on a modeling approach transferable to other coastal areas.

• Geomechanics and Engineering
• /
• v.18 no.1
• /
• pp.11-20
• /
• 2019

The purpose of this study was to propose a new approach for quantifying in situ rock mass damage, which would include a degree-of-damage and the degraded strength of a rock mass, along with its prediction based on real-time Acoustic Emission (AE) observations. The basic approach for quantifying in-situ rock mass damage is to derive the normalized value of measured AE energy with the maximum AE energy, called the degree-of-damage in this study. With regard to estimation of the AE energy, an AE crack source location algorithm of the Wigner-Ville Distribution combined with Biot's wave dispersion model, was applied for more reliable AE crack source localization in a rock mass. In situ AE wave attenuation was also taken into account for AE energy correction in accordance with the propagation distance of an AE wave. To infer the maximum AE energy, fractal theory was used for scale-independent AE energy estimation. In addition, the Weibull model was also applied to determine statistically the AE crack size under a jointed rock mass. Subsequently, the proposed methodology was calibrated using an in situ test carried out in the Underground Research Tunnel at the Korea Atomic Energy Research Institute. This was done under a condition of controlled incremental cyclic loading, which had been performed as part of a preceding study. It was found that the inferred degree-of-damage agreed quite well with the results from the in situ test. The methodology proposed in this study can be regarded as a reasonable approach for quantifying rock mass damage.