• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.380-387
• /
• 2011

In this paper, we considered the authoritative representation of Command and Fire Control System(CFCS) for the surface ship that was the engineering level model to develop system specifications and to analyze operational concepts on the concept design phase and to analyze military requirements, effectiveness and performance for the system. The engineering level model of CFCS can be used in simulation independently of the surface ship's type, and also it takes reuse, interoperability, and extension into consideration. The detailed sub-models, internal and external data interface, data flow among each sub-model, sensor and weapon models about the engineering level model of CFCS was defined. It was verified via engineering level simulations according to the V&V process.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.105-113
• /
• 2018

This paper proposes pre-analysis on planning of high-voltage direct current (HVDC) transmission system applied to Korea electric power grid. HVDC transmission system for interface lines has been considered as alternative solution for high-voltage AC transmission line in South Korea since constructing new high-voltage AC transmission lines is challenging due to political, environmental and social acceptance problems. However, the installation of HVDC transmission system as interface line in AC grid must be examined carefully. Thus, this paper suggests three scenarios to examine the influences of the installation of HVDC transmission system in AC grid. The power flow and contingency analyses are carried out for the proposed scenarios. Power reserves in metro area are also evaluated. And then the transient stability analysis focusing on special protection scheme (SPS) operations is analyzed when critical lines, which are HVDC lines or high voltage AC lines, are tripped. The latest generic model of HVDC system is considered for evaluating the impacts of the SPS operations for introducing HVDC system in the AC grid. The analyses of proposed scenarios are evaluated by electromechanical simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.413-418
• /
• 2003

In this paper, a new multirate optimal finite impulse response (FIR) filter is proposed for the signal reconstruction in the nosy filter bank systems. The multirate optimal FIR filter replaces the conventional synthesis filters and the Kalman synthesis filter. First, the generic linear model is derived from the multirate state space model for an autoregressive (AR)input signal. Second, the multirate optimal FIR filter is derived from the multirate generic linear model using the minimum variance criterion. This paper also provides numerical examples and results. The simulation results illustrate that the performance is improved compared with conventional synthesis filters and the proposed filter has advantages over the Kalman synthesis filter.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.04a
• /
• pp.776-782
• /
• 1995

This paper presents a methodology for development of a heterarchical control system in Flexible Manufacturing Systems (FMS) environment. A Petri net based model is applied for development of control software. A real-time scheduling methodology for the heterarchical system is also developed and it is used as a software entity in the overall architecture. The partition of generic and specific modules in control software development is emphasized. The control system performs its control tasks in two stages: (1) generation of generic control code and distribution of them to each controller entity prior to system execution; (2) generation of specific control code according to job arrival and its process plan. The control software and the scheduling algorithm are evaluated by a simulation program.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.673-675
• /
• 1995

A nonlinear process-model based control for main steam temperature control of a 100MW oil-fired drum-type fossil power plant is delveloped and its performances are compared to those of the conventional PID control. The process model for simulation is derived based "first priciple approach" and is validated in steady and transient conditions. The model is in good agreements with the field test data. Performances of the nonlinear PMBC for main steam temperature control are far superior to those of PID in all aspects for the disturbances of ramp increase in load and step change in fuel Btu value.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.539-542
• /
• 2003

In South Korea, flooding is controlled with large or small reservoirs scattered spatially over the territory. Because recent unexpected hard-rain events requires more flood control capacities, the pre-release system is considered with the most economical alternative. In this case time and volume of discharge should be determined by the simulation. But, existing pre-release simulation system has the problem of specificity. Therefore, GASS is considered to estimate the pre-release time and volume with different configurations of pre-release system. This paper shows that pre-release simulation system could be constructed with arranging GASAtmosphere, GASWatershed, Reservoir, Gate components using GASS. It is also shows that GASS could be used as a foundation for constructing pre-release simulation system that is easy to use and is flexible to reflect the changing configurations of reservoir systems.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.16 no.2
• /
• pp.255-262
• /
• 1992

A computer simulation methiod for costume design has been developed using LUMENA, a generic-purpose 2-dimensional graphic software. In this study the palette, tone chart, fabric chart, styling chart, and costume drawing were constructed on the computer. In costume design simulation, fabric swatches with various colors and patterns were applied to the base garment image taken by using a scanner or a video camera. In this procedure the original 3-dimensional effect was fully retained. Using this simulation method, a number of costume designs could be carried out in short time without actually making the garment. A portfolio including the tone chart, fabric chart, styling chart, costume drawing, and simulation results were made for the purpose of demonstration, using the animation tools of LUMENA.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.3
• /
• pp.1-9
• /
• 2014

The aim of this study is to develop a simulation model for analyzing 2D truss structure using Generic Agricultural System Simulator (GASS). Although the truss is simple structure, numerical methods based on matrix analysis are cumbersome and complicated. This study suggests simple and convenient methods to remove calculating steps for whole stiffness matrices. The simulation environment based on independency of object-oriented components on GASS consists of component development and component deploy stages. A component for a truss structure is implemented based on equilibrium equations at nodes. The simulator can analyze truss structures through deploying components with attributes and links. The examples using GASS show intuitive graphical results of the movements of truss nodes.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1302-1303
• /
• 2015

Prior to constructing real-time electric power systems in industry fields, a numerical study is generally carried out for demonstrating its reliability by using professional simulation tools. This paper presents a dynamic simulation for synchronous generator systems including excitor and governor systems in ships via the ETAP software. Moreover, we accomplish numerical studies for its dynamics and stability through simulation results applying generic disturbances in practice to constructed electric power systems in ships.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.219-226
• /
• 2012

This study provides an analysis on results of neutron logging for various borehole environments through numerical simulation based on a Monte Carlo N-Particle (MCNP) code developed and maintained by Los Alamos National Laboratory. MCNP is suitable for the simulation of neutron logging since the algorithm can simulate transport of nuclear particles in three-dimensional geometry. Rather than simulating a specific tool of a particular service company between many commercial neutron tools, we have constructed a generic thermal neutron tool characterizing commercial tools. This study makes calibration chart of the neutron logging tool for materials (e.g., limestone, sandstone and dolomite) with various porosities. Further, we provides correction charts for the generic neutron logging tool to analyze responses of the tool under various borehole conditions by considering brine-filled borehole fluid and void water, and presence of borehole fluid.