• Journal of the Korea Concrete Institute
• /
• v.20 no.1
• /
• pp.51-58
• /
• 2008

Analytical probabilistic vulnerability analysis requires extensive computing effort as a result of the randomness in both input motion and response characteristics. In this study, a new methodology whereby a set of vulnerability curves are derived based on the fundamental response quantities of stiffness, strength and ductility is presented. A response database of coefficients describing lognormal vulnerability relationships is constructed by employing aclosed-form solution for a generalized single-degree-of-freedom system. Once the three fundamental quantities of a wide range of structural systems are defined, the vulnerability curves for various limit states can be derived without recourse to further simulation. Examples of application are given and demonstrate the extreme efficiency of the proposed approach in deriving vulnerability relationships.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.3166-3187
• /
• 2017

For "generic" multivariate public key cryptography (MPKC) systems, experts believe that the Unbalanced Oil-Vinegar (UOV) scheme is a feasible signature scheme with good efficiency and acceptable security. In this paper, we address two problems that are to find inversion solution of quadratic multivariate equations and find another structure with some random Oil-Oil terms for UOV, then propose a novel signature scheme based on hyper-sphere (HS-Sign for short) which directly answers these two problems. HS-Sign is characterized by its adding Oil-Oil terms and more advantages compared to UOV. On the one side, HS-Sign is based on a new inversion algorithm from hyper-sphere over finite field, and is shown to be a more secure UOV-like scheme. More precisely, according to the security analysis, HS-Sign achieves higher security level, so that it has larger security parameters choice ranges. On the other side, HS-Sign is beneficial from both the key side and computing complexity under the same security level compared to many baseline schemes. To further support our view, we have implemented 5 different attack experiments for the security analysis and we make comparison of our new scheme and the baseline schemes with simulation programs so as to show the efficiencies. The results show that HS-Sign has exponential attack complexity and HS-Sign is competitive with other signature schemes in terms of the length of the message, length of the signature, size of the public key, size of the secret key, signing time and verification time.

• International Journal of Automotive Technology
• /
• v.8 no.6
• /
• pp.731-744
• /
• 2007

A method for dynamic analysis and design calculation of a Powertrain Mounting System(PMS) including Hydraulic Engine Mounts(HEM) is developed with the aim of controlling powertrain motion and reducing low-frequency vibration in pitch and bounce modes. Here the pitch mode of the powertrain is defined as the mode rotating around the crankshaft of an engine for a transversely mounted powertrain. The powertrain is modeled as a rigid body connected to rigid ground by rubber mounts and/or HEMs. A mount is simplified as a three-dimensional spring with damping elements in its Local Coordinate System(LCS). The relation between force and displacement of each mount in its LCS is usually nonlinear and is simplified as piecewise linear in five ranges in this paper. An equation for estimating displacements of the powertrain center of gravity(C.G.) under static or quasi-static load is developed using Newton's second law, and an iterative algorithm is presented to calculate the displacements. Also an equation for analyzing the dynamic response of the powertrain under ground and engine shake excitations is derived using Newton's second law. Formulae for calculating reaction forces and displacements at each mount are presented. A generic PMS with four rubber mounts or two rubber mounts and two HEMs are used to validate the dynamic analysis and design calculation methods. Calculated displacements of the powertrain C.G. under static or quasi-static loads show that a powertrain motion can meet the displacement limits by properly selecting the stiffness and coordinates of the tuning points of each mount in its LCS using the calculation methods developed in this paper. Simulation results of the dynamic responses of a powertrain C.G. and the reaction forces at mounts demonstrate that resonance peaks can be reduced effectively with HEMs designed on the basis of the proposed methods.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.7
• /
• pp.562-572
• /
• 2003

A matched-target model inversion method was developed for a passive sonar to estimate the position of moving targets. Based on the well known matched-field processing in underwater acoustics, the method finds target position by matching the measured target directions and frequencies with the corresponding values of the proposed target model. For the efficient and accurate estimations, the parameter searching was accomplished using a hybrid optimizing method, which first starts with a global optimization such as generic algorithm or simulated annealing then applies a local optimization of a simple down hill algorithm. The suggested method was testified using simulations for three different moving scenarios. The simulation results showed that the method is robust in convergence, even under the situation of over 5 times standard deviation of Gaussian distribution of measured error, and is practical in calculation time as well.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.78-87
• /
• 2009

In the IEEE 802.16 Wireless MAN standard, the best effort service class is ranked on the lowest position in priority and is assisted by a MAC scheme based on reservation ALOHA. In such a MAC scheme, a collision among the requests is unavoidable so that the standard adopted a binary exponential back-off rule to arbitrate a collision. Aiming at improving throughput performance, we present two generic collision arbitration rules based on p-persistence rule, (identified as pristine and metamorphosed rules), as alternatives in a wireless MAN. For each of these rules, we then develop an analytical method to calculate an approximate value of saturated throughput. In comparison with simulation results, we confirm the high accuracy of the analytical method. Also, the pristine and metamorphosed rules are observed to exhibit higher saturated throughput compared with the binary exponential back-off rule.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.12C
• /
• pp.1142-1148
• /
• 2007

In this paper, we propose ASLM (Adaptive Selective Mapping; ASLM) scheme based on peak observation for PAPR (Peak-to-Average Power Ratio) reduction of OFDM (Orthogonal Frequency Division Multiplexing) signals. The proposed scheme is composed of three steps: peak scaling, sequence selection, and SLM procedures. In the first step, the peak signal samples in the IFFT (Inverse Fast Fourier Transform) outputs of the original input sequence are scaled down. In the second step, the sub-carrier positions where the power difference between the original input sequence and the FFT output of the scaled signal is large, are identified. Then, the phase sequences having the maximum number of phase-reversed sequence words only for these positions are selected. Finally, the generic SLM procedure is performed by using only the selected phase sequences for the original input sequence. Simulation results show that the proposed scheme significantly reduces the complexity in terms of IFFT and PAPR calculation than the conventional SLM, while maintaining the PAPR reduction performance.

• Composites Research
• /
• v.16 no.3
• /
• pp.1-8
• /
• 2003

Densification occurs by the inelastic flow of the matrix materials during the consolidation processes at high temperature for MMCs, and the results depend on many process conditions such as applied pressure, temperature and volume fraction of fiber and matrix materials. This is particularly important in titanium matrix composites since material failure may occur by either the applied conditions or microstructural parameters through the processes, and thus a generic model based on micro-mechanical approaches enabling the evolution of density over time to be predicted has been developed. The mode developed is then implemented into FEM so that practical process simulation has been carried out. Further the experimental investigation of the consolidation behavior of SiC/Ti-6Al-4V composites using vacuum hot pressing has been performed, and the results obtained are compared with the model predictions.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.3
• /
• pp.215-224
• /
• 2002

This paper describes EGSE design for the small satellite such like KOMPSAT-2 satellite. Recent design trend of small satellite and EGSE is to take short development time and less cost. For this purpose, the design for KOMPSAT-2 satellite and EGSE are not much modified from KOMPSAT-1 heritage. It means that it is able to be accommodated the verified hardware and software modules used in KOMPSAT-1 satellite program if possible. The objective of EGSE is to provide hardware and software for efficient electrical testing of integrated KOMPSAT-2 satellite in three general categories. (1) Simulators for ground testing (e.g. solar-simulation power, earth scenes, horizons and sun sensor). (2) Ground station type satellite data acquisition and processing test sets. (3) Overall control of satellite using hardline datum. In KOMPSAT (KOrea Multi-Purpose SATellite) program, KOMPSAT-2 EGSE was developed to support satellite integration and test activities. The KOMPSAT-2 EGSE was designed in parallel with satellite design. Consequently, the KOMPSAT-2 EGSE was based on the KOMPSAT-1 heritage since the spacecraft design followed the heritage. The KOMPSAT-2 baseline was elaborated by taking advantage of experience from KOMPSAT-1 program. The EGSE of KOMPSAT-2 design concept is generic modular design with preference in part selection with commercial off-the-shelf which were proven from KOMPSAT-1 programs, flexible/user friendly operational environment (graphical interface preferred), minimized new design and self test capability.

• The Korean Journal of Applied Statistics
• /
• v.18 no.1
• /
• pp.159-171
• /
• 2005

The US Food and Drug Administration(FDA) recommends that population bioequivalence and individual bioequivalence would be assessed to address the prescribability and switchability between a brand-name drug and its new formulation or generic copy in its 2001 guidance document. The test for population bioequivalence in the latest FDA guidance is recommended in 2 x 4 crossover design, but it turns out to be very conservative. Recently Lee, Shao & Chow(2002), Chow, Shao & Wang(2003) and McNally, Iyer & Mathew(2002) proposed new statistical methods for assessing population bioequivalence between drugs to correct the biasness of current FDA method. Since 2 x 2 crossover experiment is most welcomed design in bioequivalence testing, we adopt their methods to 2 x 2 crossover designs and compare their methodologies with FDA one through the simulation study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1076-1084
• /
• 2009

We propose an ATI (Adaptive Tone Injection) scheme based on clipping noise for PAPR (Peak-to-Average Power Ratio) reduction of OFDM (Orthogonal Frequency Division Multiplexing) signals. The proposed scheme is composed of three steps: clipping, tone selection, and TI procedures. In the first step, the peak samples in the IFFT (Inverse Fast Fourier Transform) outputs are scaled down by clipping. In the second step, the sub-carrier position where the power of the clipping noise is the maximum, is selected. Finally, the generic TI procedure is performed. Simulation results show that the proposed scheme does not require all the possible combinations of the original TI procedures, while maintaining the PAPR reduction performance.