• Tribology and Lubricants
• /
• 제28권5호
• /
• pp.197-202
• /
• 2012

In this study, with the purpose of fundamentally improving the unbalance response vibration of a large PRT motor-generator rotor by design, a performance improvement design analysis is carried-out by retrofitting tilting pad bearings, replacing the plain partial journal bearings that were originally applied for operation at a rated speed of 1,800 rpm. In this process, a goal of the design analysis is to obtain a design solution for maximizing the direct stiffness of the bearings while satisfying the key basic lubrication performance requirements such as the minimum lift-off speed and maximum oil-film temperature. The results show that with a careful design application of tilting pad journal bearings for operation at such a relatively low speed of 1,800 rpm, direct stiffness increment of the bearings by about two times can be effectively achieved. Prevention of pad unloading is also considered in the analysis. Moreover, the designs of elliptical and offset half journal bearings are also analyzed and reviewed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.510-511
• /
• 2011

This paper has represented about the activated scheme the Honam regional wind power industry favorable products. The favorable products are the MW offshore wind system with Outer-rotor type PMSG-6 products, the 3MW offshore wind system with adatation type of west-south sea, and the hybrid generator system with wind turbine technology basis-2 products.

• 전기학회논문지P
• /
• 제54권4호
• /
• pp.211-216
• /
• 2005

In this paper a robust controller using adaptive backstepping technique is proposed to control the speed of wind power generation system. To make wind power generation truly cost effective and reliable, advanced and robust control algorithms are derived to on-line adjust the excitation winding voltage of the generator based on both mechanical and electrical dynamics. This method is shown to be able to achieve smooth and asymptotic rotor speed tracking, as justified by analysis and computer simulation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.89-89
• /
• 2010

발전기 회전자 권선 층간절연지는 대부분 글라스-에폭시(Glass-Epoxy) 및 페놀수지 제품이 사용되고 있다. 이 층간절연지는 과도하게 열적, 기계적 응력을 받게 됨으로 높은 기계적 특성이 요구된다. 실제 장기간 사용된 층간절연지에 대해 기계적 인장특성을 분석하였으며 시험결과 운전년수와 기계적 특성 저하와는 뚜렷한 상관관계가 없는 것으로 판단되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1691-1692
• /
• 2008

In this paper, the adaptive neural network technique is proposed to control the speed of wind power generation system. For maximizing generated power effectively, adaptive neural algorithm based on SRWMM(Self Recurrent Wavelet Neural Network) is derived to on-line adjust the excitation winding voltage of the generator. Through computer simulations, it is shown that the proposed method can achieve smooth and asymptotic rotor speed tracking.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 추계학술대회 논문집
• /
• pp.60-64
• /
• 2003

신재생에너지 개발을 위한 권선형유도발전기의 유효전력제어와 무효전력제어에 대해 고찰하였다. 10kW DFIG에 양방향 AC/DC/AC 전력변환장치를 적용한 실험을 통해 유효전력제어와 무효전력제어를 검증하였고, 운전 개시 속도를 결정하는 방법과 전력변환장치 용량을 고려한 제어방법, 그리고 역률 가변을 통해 저속도 영역에서의 에너지 회수방안에 대해 고찰하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 전문대학교육위원
• /
• pp.128-131
• /
• 2005

In this paper a robust controller using adaptive backstepping technique is proposed to control the speed of a wind turbine system. To make wind power generation truly cost effective and reliable, advanced and robust control algorithms are derived to on-line adjust the excitation winding voltage of the generator based on both mechanical and electrical dynamics. This method is shown to be able to achieve smooth and asymptotic rotor position tracking, as justified by analysis.

• 대한전기학회논문지
• /
• 제37권1호
• /
• pp.10-17
• /
• 1988

The torsional resonance of the generator shaft system has the possibility of inducing voltages across the stator winding because it is a carrier with the field excitation. And these torsional induced stator currents inducs the eddy current in the rotor. This paper describes the eddy current based on the double Fourier series method. The forces generating during the torsional interaction are computed using the Maxwell's magnetic stress tensor for each of the Fouriercomponennts. And then, these forces of the Fourier components are evaluated by the Parseval's theorem.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.88-90
• /
• 1996

In this paper center manifold theory is reviewed and its application to the control of bifurcations is explored. When applying the theory to a sample power system, we study the stabilization of bifurcation points using controls depending only on the rotor angular velocity of a generator. Under such a control it is shown that the system is not locally stabilizable when control is applied through mechanical power, and the system is locally stabilizable when the control is applied to the capacitor compensator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1227-1229
• /
• 2007

In this paper a robust controller using adaptive backstepping technique is proposed to control the position of wind power generation system. To make wind power generation truly cost effective and reliable, advanced and robust control algorithms are derived to on-line adjust the excitation winding voltage of the generator based on both mechanical and electrical dynamics. This method is shown to be able to achieve smooth and asymptotic rotor speed tracking, as justified by analysis and computer simulation.