• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.78-85
• /
• 1999

To investigate kernel hardness, a compression test which is widely used to measure the hardness of individual kernels as a physical testing method was made simultaneously with the measurement of friabilin (15KDa) which is strongly associated with kernel hardness and was recently developed as a biochemical marker for evaluating kernel hardness in 79 Korean wheat varieties and experimental lines. With the scattered diagram based on the principal component analysis from the parameters of the compression test, 79 Korean wheat varieties were classified into three groups based on the principal component analysis. Since conventional methods required large amount of flour samples for analysis of friabilin due to the relatively small amount of friabilin in wheat kernels, those methods had limitations for quality prediction in wheat breeding programs. An extraction of friabilin from the starch of a single kernel through cesium chloride gradient centrifugation was successful in this experiment. Among 79 Korean wheat varieties and experimental lines 50 lines (63.3%) exhibited a friabilin band and 29 lines (36.7%) did not show a friabilin band. In this study, lines that contained high maximum force and the lower ratio of minimum force to maximum force showed the absence of the friabilin band. Identification of friabilin, which is the product of a major gene, could be applied in the screening procedures of kernel hardness. The single kernel analysis system for friabilin was found to be an easy, simple and effective screening method for early generation materials in a wheat breeding program for quality improvement.

• Journal of the Korean Society of Visualization
• /
• v.10 no.1
• /
• pp.27-33
• /
• 2012

This paper describes a new design of small-scale horizontal wind blade, called spiral wind turbine blade. Theoretical and numerical approaches on the prediction of aerodynamic performance of the blade have been conducted. A theoretical equation is successfully derived using the angular momentum equation to predict aerodynamic characteristics according to the design shape parameters of spiral blade. To be compared with the theoretical value, a numerical simulation using ANSYS CFX v12.1 is performed on the same design with the theoretical one. Large scale tip vortex is captured and graphically presented in this paper. The TSR-$C_p$ diagram shows a typical parabolic relation in which the maximum efficiency of the blade approximately 25% exists at TSR=2.5. The numerical simulation agrees well with that of the theoretical result except at the low rotational speed region of 0~20 rad/s.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.3 s.258
• /
• pp.256-263
• /
• 2007

The purpose of this study is to investigate the cooling performance of heat sinks for an electronic telecommunication system by adequate natural convection. Heat generation rates of electronic components and the temperature distributions of heat sinks and surrounding air are analyzed experimentally and numerically. In order to perform the heat transfer analysis for the thermal design of telecommunication system a program is developed. The program used the graphic user interface environment to determine the arrangement of heat sources, interior fan capacity, and heat sink configuration. The simulation results showed that the heat sinks were able to achieve a cooling capacity of up to 230W at the maximum temperature difference of $19^{\circ}C$. To verify the results from the numerical simulation, an experiment was conducted under the same condition as the numerical simulation, and their results were compared. The design program gave good prediction of the effects of various parameters involved in the design of a heat sinks for an electronic telecommunication system.

• Journal of KSNVE
• /
• v.9 no.5
• /
• pp.955-965
• /
• 1999

Centrifugal fans are widely used and the noise generated by the these machines causes one of the most serious problems. In general, the centrifugal fan noise is often dominated by tones at BPF(blade passage frequency) and its higher harmonics. This is a consequence of the strong interaction between the flow discharged form the impeller and the cutoff in the casing. However, only a few researches have been carried out on predicting the noise because of the difficulty in obtaining detailed information about the flow field and casing effects on noise radiation. The objective of this study is to understand the generation mechanism of sound and to develop a prediction method for the unsteady flow field and the acoustic pressure field of a centrifugal fan. We assume that the impeller rotates with a constant angular velocity and the flow field of the impeller is incompressible and inviscid. So, a discrete vortex method (DVM) is used to model the centrifugal by the unsteady Bernoulli equation. Lowson's method is used to predict the acoustic source. A centrifugal impeller and wedge introduced by Weidemann are used in the numerical calculation and the results are compared with the experimental data. Reasonable results are obtained not only for the peak frequencies but also for the amplitudes of the tonal sound.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.533-538
• /
• 2014

Power generator is one of the most important component of electricity generation system to convert mechanical energy to electrical energy. I t designed robustly to maintain high system reliability during operation time. But unexpected failure of the power generator could happen and it cause huge amount of economic and social loss. To keep it from unexpected failure, health prognostics should be carried out In this research, We developed a health prognostic method of stator windings in power generator with statistical data analysis and degradation modeling against water absorption. We divided whole 42 windings into two groups, absorption suspected group and normal group. We built a degradation model of absorption suspected winding using Fick's second law to predict upcoming absorption data. Through the analysis of data of normal group, we could figure out the distribution of data of normal windings. After that, we can properly predict absorption data of normal windings. With data prediction of two groups, we derived upcoming Directional Mahalanobis Distance (DMD) of absorption suspected winding and time vs DMD curve. Finally we drew the probability distribution of Remaining Useful Life of absorption suspected windings.

• Water for future
• /
• v.24 no.1
• /
• pp.63-71
• /
• 1991

This study represents the methodology for feasibility analysis of small hydro power plants. Cumulative density function of Weibull distribution and Thi-essen method were adopted to beside flow duration curve at candidate sites. The performance prediction model and construction cost estimation model for tunnel-type small hydro power plants were developed. Eight candidate sites existing on Han river selected and surveyed for actual sites reconnaissance. The performance characteristics and economical feasibility for these sites were analyzed by using developed models. As a result, it was found that the optimum design flowrates with the lowest unit generation cost for tunnel-type small hydro power plants were the flowrate concerning with between 20 % and 30 % of time ratio on the flow duration curve. Additionally, primary design specifications such as design flowrate, effective head, capacity, annual average load factor, annual electricity production were estimated and discussed for surveyed sites.

• Journal of Animal Science and Technology
• /
• v.62 no.2
• /
• pp.121-140
• /
• 2020

Anaerobic fungi habitat in the gastrointestinal tract of foregut fermenters or hindgut fermenters and degrade fibrous plant biomass through the hydrolysis reactions with a wide variety of cellulolytic enzymes and physical penetration through fiber matrix with their rhizoids. To date, seventeen genera have been described in family Neocallimasticaceae, class Neocallimastigomycetes, phylum Neocallimastigomycota and one genus has been described in phylum Neocallimastigomycota. In National Center for Biotechnology Information (NCBI) database (DB), 23,830 nucleotide sequences and 59,512 protein sequences have been deposited and most of them were originated from Piromyces, Neocallimastix and Anaeromyces. Most of protein sequences (44,025) were acquired with PacBio next generation sequencing system. The whole genome sequences of Anaeromyces robustus, Neocallimastix californiae, Pecoramyces ruminantium, Piromyces finnis and Piromyces sp. E2 are available in Joint Genome Institute (JGI) database. According to the results of protein prediction, average Isoelectric points (pIs) were ranged from 5.88 (Anaeromyces) to 6.57 (Piromyces) and average molecular weights were ranged from 38.7 kDa (Orpinomyces) to 56.6 kDa (Piromyces). In Carbohydrate-Active enZYmes (CAZY) database, glycoside hydrolases (36), carbohydrate binding module (11), carbohydrate esterases (8), glycosyltransferase (5) and polysaccharide lyases (3) from anaerobic fungi were registered. During four decades, 1,031 research articles about anaerobic fungi were published and 444 and 719 articles were available in PubMed (PM) and PubMed Central (PMC) DB.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.125-131
• /
• 2004

LiDAR 데이터의 필터링은 원 데이터로부터 건물, 수목 등과 같은 비지면점을 제거하는 과정이며, 이러한 필터링을 통해 DEM을 생성할 수 있다. 대표적인 필터링 방법들로는 분산을 이용한 linear prediction 기법, 주변 점들과의 경사관계를 이용한 slope-based 기법, morphology 필터, local maxima 필터 등이 있으며 이러한 기존의 기법들의 단점을 보완하기 위한 연구가 활발히 진행되고 있다. 대부분의 필터링 기법들은 필터의 크기(윈도우의 크기)와 같은 인자를 대상 지역에 적합하게 사용자가 직접 설정해주어야 한다. 더욱이 복잡한 지형, 지물이 존재하는 지역에 적용하기 위해서는 인자를 변형시켜줘야 하며 특히, 다양한 크기의 건물이 존재하는 지역에 대하여 적용하기 위해서는 가변적인 크기의 필터가 필요하다. 이에 본 논문에서는 다양한 크기의 건물이 존재하는 지역에 대하여 필터의 크기를 변화시키지 않고 필터링을 수행할 수 있는 연산기법을 제안하였다. 본 연구에서는 수목이나 자동차 등과 같은 작은 개체의 제거를 위해 고정된 작은 크기의 윈도우를 가지는 모폴로지 필터를 우선 적용한다. 그 후 건물과 같은 큰 개체의 포인트는 이웃 포인트와의 고도차이를 이용하여 인식하고 이웃에 위치하는 지면 포인트로 대체하며, 갱신된 값이 바로 다음 연산에 반영 되도록 한다. 또한 상, 하, 좌, 우 네 방향에 대하여 라인별로 독립된 연산을 수행한 후에 이들을 비교함으로써 오차를 보정한다.

• International Journal of Aeronautical and Space Sciences
• /
• v.17 no.2
• /
• pp.157-166
• /
• 2016

Aerodynamic loads for a horizontal axis wind turbine of the National Renewable Energy Laboratory (NREL) Phase VI rotor in yawed condition were predicted by using the blade element momentum theorem. The classical blade element momentum theorem was complemented by several aerodynamic corrections and models including the Pitt and Peters' yaw correction, Buhl's wake correction, Prandtl's tip loss model, Du and Selig's three-dimensional (3-D) stall delay model, etc. Changes of the aerodynamic loads according to the azimuth angle acting on the span-wise location of the NREL Phase VI blade were compared with the experimental data with various yaw angles and inflow speeds. The computational flow chart for the classical blade element momentum theorem was adequately modified to accurately calculate the combined functions of additional corrections and models stated above. A successive under-relaxation technique was developed and applied to prevent possible failure during the iteration process. Changes of the angle of attack according to the azimuth angle at the specified radial location of the blade were also obtained. The proposed numerical procedure was verified, and the predicted data of aerodynamic loads for the NREL Phase VI rotor bears an extremely close resemblance to those of the experimental data.

• Atmosphere
• /
• v.21 no.1
• /
• pp.69-83
• /
• 2011

The synoptic condition of clear-air turbulence (CAT) events occurred over South Korea is investigated, using the Regional Data Assimilation and Prediction System (RDAPS) data obtained from the Korea Meteorological Agency (KMA) and pilot reports (PIREPs) collected by Korea Aviation Meteorological Agency (KAMA) from 1 Dec. 2003 to 30 Nov. 2008. Throughout the years, strong subtropical jet stream exists over the South Korea, and the CAT events frequently occur in the upper-level frontal zone and subtropical jet stream regions where strong vertical wind shears locate. The probability of the moderate or greater (MOG)-level turbulence occurrence is higher in wintertime than in summertime, and high probability region is shifted northward across the jet stream in wintertime. We categorize the CAT events into three types according to their generation mechanisms: i) upper-level front and jet stream, ii) anticyclonically sheared and curved flows, and iii) breaking of mountain waves. Among 240 MOG-level CAT events reported during 2003-2008, 103 cases are related to jet stream while 73 cases and 25 cases are related to the anticyclonic shear flow and breaking of mountain wave, respectively.