• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.839-840
• /
• 2013

대부분의 경우 전자전 ES 장비는 수신 H/W가 개발되기 전에 S/W 부분이 구현 완료되는 경우가 많다. 이 때 H/W가 개발될 때까지 S/W 부분을 시험하여 S/W 알고리즘의 유효성을 검사하는 것이 중요하다. 이를 위해 신호수집 시스템을 위한 디지털 위협신호 모의가 필요하다. 본 논문에서는 실제 신호와 유사한 IF 모의 신호를 발생하는 방법을 제안한다.

• 대한조선학회논문집
• /
• 제41권1호
• /
• pp.15-22
• /
• 2004

Twin-skeg type stern shapes are recently adopted for very large commercial ships. However it is difficult to apply a CFD system to a hull form having twin-skeg, since grid topology around a twin-skeg type stern is more complicated than that of a conventional single-screw ship, or of an open-shaft type twin-screw ship with center-skeg. In the present study a surface mesh generator and a multi-block field grid generation program have been developed for twin-skeg type stern. Furthermore, multi-block flow solvers are utilized for potential and viscous flow analysis around a twin-skeg type stern The present computational system is applied to a 15,000TEU container ship with twin-skeg to prove the applicability. Wave profiles and wake distribution are calculated using the developed flow analysis tools and the results are compared with towing tank measurements.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.217-222
• /
• 2007

This paper describes a static gait generation process and a mechanical design process of leg mechanisms for quadruped robots. Actually robot walking is realized with the joint motion of leg mechanisms. In order to calculate the time-angle trajectories for each joint of leg mechanisms, we generate end-tip trajectories with time for each leg in the global inertial coordinate system intuitively, followed by coordinate transformations of the trajectories into the local coordinates system fixed in each leg, finally the angle-time trajectories of each joint of leg mechanisms are obtained with inverse kinematics. The stability of the gait generated in this paper was verified by a multi-body dynamic analysis using the commercial software $ADAMS^{(R)}$. Additionally the mechanical specifications such as gear reduction ratio, electrical specifications of motor and electrical power consumption during walking have been confirmed by the multi-body dynamic analysis. Finally we constructed a small quadruped robot and confirmed the gait.

• 한국초등과학교육학회지:초등과학교육
• /
• 제28권2호
• /
• pp.93-104
• /
• 2009

The purpose of this study was to explore the relationship between pre-service elementary teacher's prior knowledge and processes of observations and hypotheses generation via analysis of descriptive fault patterns during observation, problem generation and hypotheses generation processes. For the purpose of this study, thirty-four undergraduate students were participated and descriptions of participants' responds were analyzed. As the result, four patterns of descriptive fault on the process of generating hypothesis were classified; 1) descriptive fault from the causalities, 2) descriptive fault from repetition of observational facts, 3) descriptive fault from the priority of prior knowledge, and 4) descriptive fault from negation of the observational facts. From the result, the researcher was able to explore the faults caused by pre-service elementary students' prior knowledge through the observational descriptive analysis with hypothetical descriptive analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.24-27
• /
• 2004

This paper proposes a new algorithm of underground cable fault location based on the analysis of distributed parameter circuit. The proposed method firstly makes voltage and current equations for each of cores and sheathes respectively, and then establishes an equation of the fault distance according to the analysis of the fault conditions. Finally the solution of this equation is calculated by Newton-Raphson iteration method. The effectiveness of this proposed algorithm has been proven through PSCAD/EMTDC simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.412-414
• /
• 2004

In this paper, a novel algorithm of underground cable fault location based on the analysis of distributed parameter circuit is proposed. The proposed method makes voltage and current equations about core and sheath, and then establishes a function of the fault distance according to the analysis of fault conditions. Finally gets the solution of this function through Newton-Raphson iteration method. The effectiveness of proposed algorithm has been verified by Matlab program, and the cable parameters such as impedance and admittance are from EMTP simulation.

• Advances in Energy Research
• /
• 제8권3호
• /
• pp.125-136
• /
• 2022

Entropy generation along with exergetic analysis is carried out using turbulent nanofluid flow in the heat exchanger. To obtain the optimized percentage constituent of nanofluid, the nanofluid volume concentrations is varied for the given input conditions. For different Reynolds number of the fluid and heat capacity rate ratio between the streams, the heat transfer improvements are studied in terms of nano particles diameter. Parametric analysis is carried out for a counterflow heat exchanger using turbulent nanofluid flow with exergetic efficiency along with entropy generation number as performance parameters. The exergetic efficiency provides realistic approach in the design of nanofluid applications in heat exchanger leading to conservation of energy.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1227-1234
• /
• 2015

The efficient electric power demand management in electric power supply industry is currently being changed by distributed generation. Meanwhile, small-scale distributed generation systems using renewable energy are being constructed worldwide. Several small-scale renewable distributed generation systems, which can supply electricity to the grid at peak load of the grid as per policy such as demand response programs, could help in the stability of the electric power demand management. In this case, the power quality of the small-scale renewable distributed generation system is more significant. Low prices of power semiconductors and multilevel inverters with high power quality have been recently investigated. However, the conventional multilevel inverter topology is unsuitable for the small-scale renewable distributed generation system, because the number of devices of such topology increases with increasing output voltage level. In this paper, a single-phase multilevel inverter based on H-bridge, with DC_Link divided by bi-directional switches, is proposed. The proposed topology has almost half the number of devices of the conventional multilevel inverter topology when these inverters have the same output voltage level. Double Fourier series solution is mainly used when comparing PWM output harmonic components of various inverter topologies. Harmonic components of the proposed multilevel inverter, which have been analyzed by double Fourier series, are compared with those of the conventional multilevel inverter. An inverter prototype is then developed to verify the validity of the theoretical analysis.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.82-86
• /
• 2002

The thermal characteristics of high-speed air spindle system with built-in motor are studied. Experiment and finite difference method analysis obtain temperature rise and temperature distribution of housing. For the analysis, air fluid film model is built and temperature rise and distribution in thermal steady state are computed for each rotational speed. Generally, it is said that the heat generation of air bearing is negligible. But the heat generation in air film by heat dissipation can not be negligible especially into high-speed region of the journal. In case that the heat generation of air spindle system is high, natural frequency of the spindle system becomes lower when the thermal state is in steady-state and it means the changes of air bearing stiffness due to the change of bearing clearance. It is shown that the temperature rise of air spindle system causes thermal expansion and induces the variation of bearing clearance. In consequence the stiffness of air bearing becomes smaller.

• 에너지공학
• /
• 제14권2호
• /
• pp.123-132
• /
• 2005

본 논문은 현재 건설 중인 대관령 풍력발전 단지의 풍력 발전 관련 풍속의 분포 및 풍력 발전량을 검토하고, 대관령 풍력 발전의 경제성을 분석하였다. 풍력발전에 있어 풍속의 분포가 핵심요소이고, 풍속분포는 shape factor및 scale factor로 구성되는 Weibull 분포함수로 일반적으로 표현되나, 실제 풍속 분포자료를 조사하여 최적의 계수를 도출, 연간 풍력 발전량을 구하였다. 풍력발전 시설의 초기투자비 및 유지관리 비용은 국내 자료를 이용코자 하였으나, 관련 자료의 확보에 어려움이 있어 유럽풍력협회의 자료(EWEA, 2003. 12)를 적용하였다. 결과는 현재 발전차액제도를 통해 보전되는 풍력에너지의 적정한 기준가격을 마련하는데 유익한 정보를 제공한다.