• The Mathematical Education
• /
• v.63 no.3
• /
• pp.451-466
• /
• 2024

This study investigated elementary preservice teachers' conceptions of a generating line, an ambiguous concept in school mathematics. The preservice teachers' conceptions of a generating line can be classified into four types: (a) only cones have generating lines, (b) only cones and cylinders have generating lines, (c) solids of revolution have generating lines, (d) straight lines on the lateral surface are generating lines. 22.1% of all preservice teachers believed that only cones have generating lines, and most of them followed the definition of a generating line presented in elementary mathematics textbooks. The conception that only cones and cylinders have generating lines was the least investigated. However, since there were instances where generating lines were defined with the use of a director curve, it became important to explore topics more thoroughly, such as generating lines of a truncated cone. 27.9% of all preservice teachers believed that solids of revolution have generating lines. This conception was marked by differing opinions on whether spheres also have generating lines. The conception that straight lines on the lateral surface are generating lines was the most frequently investigated. This conception differs from the traditional view in school mathematics because it suggests using a director curve to define generating lines. Based on these analysis results, the researcher developed specific teaching methods that considered both subject matter knowledge and pedagogical content knowledge for preservice teachers. In addition, the researcher proposed a consensus definition of a generating line in mathematics education.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.375-378
• /
• 1995

Although laser interferometer measurement system has the advantage of range and accuracy, the traditional error measurement methods for geometric errors(two straightness and three angular errors) of a machine tool measures error components one at a time. It may also create an optical path difference and affect the measurement accuracy. In order to identify and compensate for geometric error of a moving body, an on-line measurement system for simultaneous detection of the five error components of a moving axis is required. An on-line measurement system with 5 degrees of freedom was developed for geometric error detection. Performance verification of the system was performed on an error generating mechanism. Experimental results show the feasibility of this system for identifying geometric errors of a side of machine tool.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.570-571
• /
• 2008

This paper presents a method for the determination of total transfer capability in interconnected power systems, which is based on sequential quadratic programming (SQP). The objective function is the maximization of the interconnected line flow. To calculate TTC the control variables are the active power of the generating units, the voltage magnitude of the generator, transformer tap settings and SVC setting. The state variables are the bus voltage magnitude, the reactive power of the generating unit, line flows and the tie line flow. The method proposed is applied to the modified IEEE 14 buses model system.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.239-242
• /
• 2001

This paper presents a windows program package for solving security constrained OPF in interconnected power systems, which is based on the combined application of evolutionary programming(EP) and sequential quadratic programming(SQP). The objective functions are the minimization of generation fuel costs and system power losses. The control variables are the active power of the generating units, the voltage magnitude of the generator, transformer tap settings and SVC setting. The state variables are the bus voltage magnitude, the reactive power of the generating unit, line flows and the tie line flow. In OPF considering security, the outages are selected by contingency ranking method. The resulting optimal operating point has to be feasible after outages such as any single line outage(respect of voltage magnitude, reactive power generation and power flow limits). The OPF package proposed is applied to 10 machines 39 buses model system.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.185-192
• /
• 1996

This paper presents a design of vertical axis Darrieus wind turbine combine with Savonius for wind-power generating system to be adapted for variable wind speed. The wind turbine consists of two troposkien- and four Savonius-blades. Darrieus turbine is designed with diameter 9.4[m], chord length 380[mm], tip speed ratio 5. Savonius turbine is designed with diameter 1.8[m], height 2[m], tip speed ratio 0.95. The design of turbine is laid for the main data of rated wind speed 10[m/s], turbine speed 101.4[rpm]. The generating power is estimated to maximum power 20[kW], and this is converted to commercial power line by means of three phase synchronous generator-inverter system. Generating system is designed for operation on VSVF(variable speed variable frequency) condition and constant voltage system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.4
• /
• pp.519-528
• /
• 1998

This paper examines the effect of storage location configurations on dual command cycle times for the efficient operation of automated storage/retrieval systems. We use a contour line approach to determine storage location configurations. We present a contour line configuration generating scheme and a location indexing scheme. Given a contour line configuration, the location indexing scheme provides a unique priority to each location. The location priority is then used for determining the storage location of an incoming load. To investigate the effect of alternative contour line configurations on dual command cycle times, we perform a series of experiments under various storage policies.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.11
• /
• pp.95-103
• /
• 1997

A robust center estimation tecnique of n-fold engineering parts is presented, which use self-organizing neural networks with generating and merging learning for training neural units. To estimate the center of the n-fold engineering parts using neural networks, the segmented boundaries of the interested part are approximated to strainght lines, and the temporal estimated centers by thecosine theorem which formed between the approximaged straight line and the reference point, , are indexed as (.sigma.-.theta.) parameteric vecstors. Then the entries of parametric vectors are fed into self-organizing nerual network. Finally, the center of the n-fold part is extracted by mean of generating and merging learning of the neurons. To accelerate the learning process, neural network uses an adaptive learning rate function to the merging process and a self-adjusting activation to generating process. Simulation results show that the centers of n-fold engineering parts are effectively estimated by proposed technique, though not knowing the error distribution of estimated centers and having less information of boundaries.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.4
• /
• pp.989-998
• /
• 2005

The internet survey is more time and cost efficient than the off-line survey. We design and implement a web-based questionnaire generating system for the internet survey. The system guides users to make up a questionnaire step by step. It also generates data code for the statistical packages such as SPSS and SAS when the internet survey has been done.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1338-1339
• /
• 2011

Recently the wind turbine generating systems are increasing world widely. This type of systems will change the nation's energy environment which largely depends on the fossil fuels. It will also bring new problems to the power industry and the customers. The expected problem is the voltage and frequency stability of the power distribution network, when a wind turbine generating system is connected to the line. It becomes necessary and important to evaluate their impact on the electrical network stability. This paper shows the electrical data measurement and analysis of a inductive wind turbine generator affecting the power quality problem of the distribution line.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.194-196
• /
• 2001

This paper presents a hybrid algorithm for solving security constrained OPF in interconnected power systems, which is based on the combined application of evolutionary programming (EP) and sequential quadratic programming (SQP). The objective functions are the minimization of generation fuel costs and system power losses. In OPF considering security, the outages are selected by contingency ranking method. The control variables are the active power of the generating units, the voltage magnitude of the generator, transformer tap settings and SVC setting. The state variables are the bus voltage magnitude, the reactive power of the generating unit, line flows and the tie line flow. The method proposed is applied to the modified IEEE 14buses model system.