• Journal of Communications and Networks
• /
• 제18권5호
• /
• pp.826-836
• /
• 2016

Increase of hypertext transfer protocol (HTTP)-based video popularity causes that broadband and Internet service providers' links transmit mainly multimedia content. Network planning, traffic engineering or congestion control requires understanding of the statistical properties of network traffic; therefore, it is desirable to investigate the characteristic of traffic traces generated, among others, by systems which employ adaptive bit-rate streaming. In our work, we investigate traffic originating from 120 client-server pairs, situated in an emulated laboratory environment, and multiplexed onto a single network link. We show that the structure of the traffic is distinct from the structure generated by first and second generation of HTTP video systems, and furthermore, not similar to the structure of general Internet traffic. The obtained traffic exhibits negative correlations, anti-persistence, and its distribution function is skewed to the right. Furthermore, we show that the traffic generated by clients employing the same or similar play-out strategies is positively correlated and synchronised (clustered), whereas traffic originated from different play-out strategies shows negative or no correlations.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.1035-1036
• /
• 2006

We analyzed the performance of hierarchical cellular system with multi traffic(voice traffic, data traffic). We executed the computer simulation by the various ratio of traffic generation(voice traffic, data traffic). We generated data traffic at microcell. The more voice traffic generated, the higher the block probability of data traffic became at macrocell.

• 한국도로학회논문집
• /
• 제15권3호
• /
• pp.31-36
• /
• 2013

PURPOSES: This study is to investigate a generated traffic noise when vehicle pass over a transverse rumble strip at toll plaza of highway. METHODS: To investigate traffic noise at toll plaza of highway, Pass-by method which is the most common used for measuring traffic noise was adopted and the traffic noise at toll plaza was measured for 10 min per hour for 11hours(13:00~24:00). RESULTS: The measured traffic noise by pass-by method was changed as function of the transverse rumble strip configuration. Generally, the maximum difference among three noise measurement sections was 7 dB(A). It might be related with traffic speed. Also, the measured traffic noise was strongly generated from a passenger car which was 2 axle. It means that the most of traffic noise on the road is generated at tire/pavement interface of the passenger car. CONCLUSIONS: The traffic noise was strongly related with vehicle speed and transverse rumble strip configuration on the road. For driver safety, the transverse rumble strip is definitely necessary. However, the complaints from residents near highway was increased by traffic noise from transverse rumble strip. Therefore, To satisfy both safety and reduction of traffic noise, the development of configuration of transverse rumble strip is necessary in the further study.

• Journal of Information Processing Systems
• /
• 제13권4호
• /
• pp.951-969
• /
• 2017

In this paper, we newly propose a traffic information service model that collects traffic information sensed by an individual vehicle in real time by using a smart device, and which enables drivers to share traffic information on all roads in real time using an application installed on a smart device. In particular, when the driver requests traffic information for a specific area, the proposed driver-personalized service model provides him/her with traffic information on the driving directions in advance by predicting the driving directions of the vehicle based on the learning of the driving records of each driver. To do this, we propose a traffic information management model to process and manage in real time a large amount of online-generated traffic information and traffic information requests generated by each vehicle. We also propose a road node-based indexing technique to efficiently store and manage location-based traffic information provided by each vehicle. Finally, we propose a driving learning and prediction model based on the hidden Markov model to predict the driving directions of each driver based on the driver's driving records. We analyze the traffic information processing performance of the proposed model and the accuracy of the driving prediction model using traffic information collected from actual driving vehicles for the entire area of Seoul, as well as driving records and experimental data.

• 한국인터넷방송통신학회논문지
• /
• 제15권6호
• /
• pp.225-230
• /
• 2015

본 논문에서는 네트워크 시뮬레이터 ns-3의 에뮬레이션 기능과 실제 통신장비를 결합하여, IEC 61850 SV(Sampled Values) 트래픽을 발생시키는 방안을 제시한다. SV 트래픽 발생과 수신은 네트워크 시뮬레이터 ns-3의 에뮬레이션 기능을 이용하고, 통신망은 실제 통신장비인 스위치들을 사용한다. 그리고 Wireshark를 이용하여 발생한 SV 트래픽 프레임들을 분석하였고, SV 트래픽 프레임들이 정확히 발생되는 것을 확인하였다. 본 논문에서 제안한 SV 트래픽 발생 방안은 실제 변전소 환경하에서 다양한 SV 트래픽들을 발생시킬 때 유용하게 활용될 수 있을 것이다.

• 한국통신학회논문지
• /
• 제33권1B호
• /
• pp.17-24
• /
• 2008

The effect of the variable packet size on the LRD characteristic of the MMPP traffic model is investigated. When we generate packet traffic for the performance evaluation of IP packet network, MMPP model can be used to generate packet interarrival time. And a random length of packet size from a certain distribution can be assigned to each packet. However, there is a possibility that the variable packet size might change the LRD characteristic of the original MMPP model. In this study, we investigate this possibility. For this purpose the 'refined traffic' is defined, where packet arrival time is generated according to the MMPP model and a random packet length from a specific distribution is assigned to each generated packet. Hurst parameter of the refined traffic is estimated and compared with the original Hurst parameter, which is the input parameter of the MMPP model. We also investigate the effect of the packet size distribution on the queueing performance of the MMPP traffic model and the relationship between the Hurst parameter and queueing performance.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권4호
• /
• pp.71-82
• /
• 2020

Traffic accidents due to excessive speed frequently occur in places where traffic signal controllers are installed, places where sharp curves exist, or places where the traffic signal cycle does not match the current time. These traffic accidents cause economic loss due to the destruction of road facilities and structures, and cause a big problem of increasing the number of traffic accident deaths. When a traffic accident occurs, leaving a tire mark before or after a car crash, pre-collision speed of the car is calculated using the law of conservation of momentum or the skid mark formula. In the skip skid mark generated in ABS brake vehicles and the combshaped yaw mark generated by tire trace caused by lateral sliding, there is a difference of 30-40% in the reliability of the vehicle speed calculated by the smite mark. In this paper, we propose an algorithm that can improve the calculation reliability in vehicle speed by using skid marks in order to compensate for this problem. In addition, we present an intelligent speed calculation algorithm for traffic safety and a computer simulation in order to prevent traffic accidents by estimating the speed of a vehicle, using Skid marks, Yaw marks, and ABS brake characteristics and fuzzy rules.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.9-13
• /
• 1993

This paper describes the impact of reflected sound in tunnel. The impact of reflected sound is obtained from making a comparision between measurements of tunnel and bridge. Sound level of tunnel is higher than that of bridge because reflected sound is generated in tunnel. Road traffic noise cannot be freely propagated because there are many buildings in urban. Therefore, a tunnel effect is generated in urban road. The impact of reflected sound is generated not only in tunnel, but also in urban road. This study provides the basic data for tunneling work and noise control strategy in urban road.

• 한국산업정보학회논문지
• /
• 제17권1호
• /
• pp.31-38
• /
• 2012

Next generation cellular applications and smart phone usage generate very heavy wireless data traffic. It becomes ineluctable for mobile network operators to have multiple core network entities such as Serving Gateway and Packet Data Network Gateway in 4G-LTE to share this high traffic generated. A typical configuration consists of multiple serving gateways behind a load-balancer which would determine which serving gateway would service a end-users'request. Such hardware is expensive, has a rigid policy set, and is a single point of failure. Another perspective of today's increasingly high data traffic is that besides it is being widely accepted that the high bandwidth L TE provides is creating bottlenecks for service providers by the increasing user bandwidth demands without creating any corresponding revenue improvements, a hidden problem that is also passively advancing on the newly emerging 4G-LTE that may need more immediate attention is the network signaling traffic, also known as the control-plane traffic that is generated by the applications developed for smartphones and tablets. With this as starting point, in this paper, we propose a solution, by a new approach considering OpenFlow switch connected to a controller, which gains flexibility in policy, costs less, and has the potential to be more robust to failure with future generations of switches. This also solves the problem of scaling the control-plane traffic that is imperative to preserve revenue and ensure customer satisfaction. Thus, with the proposed architecture with OpenFlow, mobile network operators could manipulate the traffic generated by the control-plane signaling separated from the data-plane, besides also reducing the cost in installing multiple core-network entities.

• 한국지능시스템학회논문지
• /
• 제12권2호
• /
• pp.123-128
• /
• 2002

본 논문에서는 유전 알고리즘을 사용하여 생성된 제어규칙과 멤버쉽함수를 갖는 퍼지 교통 제어기가 교차로 관리를 위해 제시된다. 일반적인 퍼지 교통 제어기들은 사람에 의해 생성된 제어규칙과 멤버쉽함수들을 사용한다. 그러나 이 방식은 퍼지 제어 시스템을 설계하는데 최적의 해를 보장하지 못한다. 유전 알고리즘은 문제 영역에 관한 휴리스틱한 지식을 쉽게 획득하기 어려운 경우에 최적해를 구하는데 유용한 방법이다. 본 논문에서는 퍼지 교통 제어기들의 근사 최적 규칙과 멤버쉽 함수를 자동으로 결정하는데 유전 알고리즘을 사용한다. 제안된 방법의 효과는 교차로망 시뮬레이션을 통하여 입증하였다.