• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.196-198
• /
• 2003

Virtually every digital signal processors(DSPs) support on-chip multi- memory banks that allow the processor to access multiple words of data from memory in a single instruction cycle. Also, all existing fixed-point DSPs have irregular architecture of heterogeneous register which contains multiple register files that are distributed and dedicated to different sets of instructions. Although there have been several studies conducted to efficiently assign data to multi-memory banks, most of them assumed processors with relatively simple, homogeneous general-purpose resisters. Therefore, several vendor-provided compilers fer DSPs were unable to efficiently assign data to multiple data memory banks. thereby often failing to generate highly optimized code fer their machines. This paper presents an algorithm that helps the compiler to efficiently assign data to multi- memory banks. Our algorithm differs from previous work in that it assigns variables to memory banks in separate, decoupled code generation phases, instead of a single, tightly-coupled phase. The experimental results have revealed that our decoupled algorithm greatly simplifies our code generation process; thus our compiler runs extremely fast, yet generates target code that is comparable In quality to the code generated by a coupled approach

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.6
• /
• pp.102-108
• /
• 2002

This paper handles the design of a real time traffic data acquisition system using loop detector and piezo-electric sensor to acquire the vehicle information EISA compatible parallel I/O interface card is designed to sample 30 I/O channels at variable rates for raw traffic data acquisition. The control software is designed to generate the traffic data informations from the raw data. The traffic data information provides vehicle length, speed, number of axles, etc. Vehicle types are detected and categorized into eleven types from the vehicle length, axles positions and axle counts information. The traffic information is formed into packet and transferred to the remote hosts through serial communications for ITS applications.

• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.1
• /
• pp.1-8
• /
• 2018

Software testing is important to determine the reliability of the system, a task that requires a lot of effort and cost. Model-based testing has been proposed as a way to reduce these costs by automating test designs from models that regularly represent system requirements. For each path of model to generate an input value to perform a test, meta-heuristic technique is used to find the test data. In this paper, we propose an automatic test data generation method using a slicing method and a priority policy, and suppress unnecessary computation by excluding variables not related to target path. And then, experimental results show that the proposed method generates test data more effectively than conventional method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.2
• /
• pp.109-116
• /
• 2005

3D Spatial Data, namely 3D Urban CG model express the building, road, river in virtual world and accumulate, manage the data in the GIS system. It is important infrastructure which expected in many usages. Recently 3D CG urban model needs much manual effort, time and costs to build them. In this paper, we introduce the integration of GIS, CG and automatic production of the $\lceil$3D Spatial Data Infrastructure$\rfloor$. This system make filtering, divide the polygon, generate the outlines of the GIS building map, design the graphic and property information and finally make automatic 3D CG models.

• Journal of Software Engineering Society
• /
• v.28 no.1
• /
• pp.23-28
• /
• 2019

Recently, in order to effectively test deep neural network model for image processing application, researches have actively conducted to automatically generate data in corner-case that is not correctly predicted by the model. This paper proposes test data generation method that selects arbitrary words from input of system and transforms them into synonyms in order to test the bug reporter automatic assignment system based on sentence classification deep neural network model. In addition, we compare and evaluate the case of using proposed test data generation and the case of using existing difference-inducing test data generations based on various neuron coverages.

• Journal of Information Science Theory and Practice
• /
• v.11 no.2
• /
• pp.67-81
• /
• 2023

This paper presents a dynamic development of an ontology-based statistical information system supporting the collection, storage, processing, analysis, and the presentation of statistical knowledge at the national scale. To accomplish this, we propose a data mining technique to dynamically collect data relating to citizens from publicly available data sources; the collected data will then be structured, classified, categorized, and integrated into an ontology. Moreover, an intelligent platform is proposed in order to generate quantitative and qualitative statistical information based on the knowledge stored in the ontology. The main aims of our proposed system are to digitize administrative tasks and to provide reliable statistical information to governmental, economic, and social actors. The authorities will use the ontology-based statistical information system for strategic decision-making as it easily collects, produces, analyzes, and provides both quantitative and qualitative knowledge that will help to improve the administration and management of national political, social, and economic life.

• Clean Technology
• /
• v.29 no.2
• /
• pp.145-150
• /
• 2023

Tele-metering systems have been useful tools for managing domestic wastewater treatment plants (WWTP) over the last decade. They mostly generate water quality data for discharged water to ensure that it complies with mandatory regulations and they may be able to produce every operation parameter and additional measurements in the near future. A sub-big data group, comprised of about 150,000 data points from four domestic WWTPs, was ready to be classified and also analyzed to optimize the WWTP process. We used the Statistical Product and Service Solutions (SPSS) 25 package in order to statistically treat the data with linear regression and correlation analysis. The major independent variables for analysis were water temperature, sludge recycle rate, electricity used, and water quality of the influent while the dependent variables representing the water quality of the effluent included the total nitrogen, which is the most emphasized index for discharged flow in plants. The water temperature and consumed electricity showed a strong correlation with the total nitrogen but the other indices' mutual correlations with other variables were found to be fuzzy due to the large errors involved. In addition, a multilayer perceptron analysis method was applied to TMS data along with root mean square error (RMSE) analysis. This study showed that the RMSE in the SS, T-N, and TOC predictions were in the range of 10% to 20%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.143-143
• /
• 2022

Precipitation plays an essential role in water resources management and disaster prevention. Therefore, the understanding related to spatiotemporal characteristics of rainfall is necessary. Nowadays, highly accurate precipitation is mainly obtained from gauge observation systems. However, the density of gauge stations is a sparse and uneven distribution in mountainous areas. With the proliferation of technology, satellite-based precipitation sources are becoming increasingly common and can provide rainfall information in regions with complex topography. Nevertheless, satellite-based data is that it still remains uncertain. To overcome the above limitation, this study aims to take the strengthens of machine learning to generate a new reanalysis of precipitation data by fusion of multiple satellite precipitation products (SPPs) with gauge observation data. Several machine learning algorithms (i.e., Random Forest, Support Vector Regression, and Artificial Neural Network) have been adopted. To investigate the robustness of the new reanalysis product, observed data were collected to evaluate the accuracy of the products through Kling-Gupta efficiency (KGE), probability of detection (POD), false alarm rate (FAR), and critical success index (CSI). As a result, the new precipitation generated through the machine learning model showed higher accuracy than original satellite rainfall products, and its spatiotemporal variability was better reflected than others. Thus, reanalysis of satellite precipitation product based on machine learning can be useful source input data for hydrological simulations in ungauged river basins.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.148-148
• /
• 2022

Spatiotemporal precipitation data is one of the primary quantities in hydrological as well as climatological studies. Despite the fact that the estimation of these data has made considerable progress owing to advances in remote sensing, the discrepancy between satellite-derived precipitation product (SPP) data and observed data is still remarkable. This study aims to propose an effective deep learning model (DLM) for bias correction of SPPs. In which TRMM (The Tropical Rainfall Measuring Mission), CMORPH (CPC Morphing technique), and PERSIANN-CDR (Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks) are three SPPs with a spatial resolution of 0.25o exploited for bias correction, and APHRODITE (Asian Precipitation - Highly-Resolved Observational Data Integration Towards Evaluation) data is used as a benchmark to evaluate the effectiveness of DLM. We selected the Mekong River Basin as a case study area because it is one of the largest watersheds in the world and spans many countries. The adjusted dataset has demonstrated an impressive performance of DLM in bias correction of SPPs in terms of both spatial and temporal evaluation. The findings of this study indicate that DLM can generate reliable estimates for the gridded satellite-based precipitation bias correction.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.3-12
• /
• 2020

Nowadays, as-is BIM generation has been popularly adopted in the architecture, engineering, construction and facility management (AEC/FM) industries. In order to generate a 3D as-is BIM of a structural component, current methods require a registration process that merges different sets of point cloud data obtained from multiple locations, which is time-consuming and registration error-prone. To tackle this limitation, this study proposes a registration-free 3D point cloud data acquisition technique for as-is BIM generation. In this study, small-size mirrors that rotate in both horizontal and vertical direction are used to enable the registration-free data acquisition technique. First, a geometric model that defines the relationship among the mirrors, the laser scanner and the target component is developed. Second, determinations of optimal laser scanner location and mirror location are performed based on the developed geometrical model. To validate the proposed registration-free as-is BIM generation technique, simulation tests are conducted on key construction components including a PC slab and a structural wall. The result demonstrates that the registration-free point cloud data acquisition technique can be applicable in various construction elements including PC elements and structural components for as-is BIM generation.