• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.397-400
• /
• 2004

Synthetic Aperture Radar(SAR) is an active micro­wave instrument that performs high-resolution observation under almost all weather conditions. Although there are many advantages of SAR instrument, many complicated steps are involved in order to generate SAR image products. Many research and algorithms have been proposed to process radar signal and to increase the quality of SAR products. However, it is hard to find research which compare the quality of SAR products generated with different algorithms and processing methods. In our previous research, a SAR processing s/w was developed for a ground station. In addition, quality assessment procedures and their test parameters inside a SAR processor was proposed. The purpose of this paper is to evaluate the quality of SAR images generated from the developed SAR processing s/w. However, If there are no direct measurements such as radar reflector or scattering field measurement values it is difficult to compare SAR images generated with different methods. An alternative procedures and parameters for SAR image quality evaluation are presented and the problems involved in the comparison methods are discussed. Experiments based on real data have been conducted to evaluate and analyze quality of SAR images.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.247-249
• /
• 2006

The objective of this study is to detect a inter-tidal topographic change in a decade. Waterline extraction is a one of widely used method to generate digital elevation model (DEM) of tidal flat using multi-temporal optical data. This method has been well known that it is possible to construct detailed topographic relief of tidal flat using waterlines In this study, we generated two sets of tidal flat DEM for the southern Ganghwado. The DEMs showed that the Yeongjongdo northern tidal flat is relatively high elevation with steep gradients. The Ganghwado southern tidal flat is relatively low elevation and gentle gradients. To detect the morphologic change of tidal flat during a decade, we compared between early 1990's DEM and early 2000's DEM. Erosion during a decade is dominant at the west of southern Ganghwado tidal flat, while sedimentation is dominant at the wide channel between the southern Ganghwado and Yeongjongdo tidal flats. This area has been commonly affected by high current and sedimentation energy. Although we are not able to verify the accuracy of the changes in topography and absolute volume of sediments, this result shows that DEM using waterline extraction method is an effective tool for long term topographic change estimation.

• The Korean Journal of Applied Statistics
• /
• v.19 no.1
• /
• pp.121-134
• /
• 2006

This paper presents the resampling method for time series data in the frequency domain obtained by using discrete cosine transforms(DCT) The advantage of the proposed method is to generate bootstrap samples in time domain comparing with existing bootstrapping method. When time series are stationary, statistical properties of DCT coefficients are investigated and provide the verification of the proposed procedure.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.3
• /
• pp.117-124
• /
• 2008

Ultra-high voltage transformer industry has characteristic of small quantity batch production system by other order processing unlike general mass production systems. In this industry, observance of time deadline is very important in market competitive power security and company continued existence. The transformer winding is a process that rolls a coil is coated with an electric insulation material in order to generate the required voltage using the voltage fluctuation. The winding process is very important production process in the extra-high voltage transformer manufacturing industry because winding process is core process that occupy weight about half of whole process and is process that decide current ratio of transformer. This paper proposes a statistical calculation and control method of planned leadtime on the basis of real data and informations for the A company in transformer winding process. Moreover, we develop unit process scheduling system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.4
• /
• pp.116-125
• /
• 2019

The Dynamic Vehicle Routing Problem (DVRP) involves a combinatorial optimization problem where new customer demands become known over time, and old routes must be reconfigured to generate new routes while executing the current solution. We consider the high level of dynamism problem. An application of highly dynamic DVRP is the ambulance service where a patient contacts the service center, followed by an evaluation of case severity, and a visit by a practitioner/ ambulance is scheduled accordingly. This paper considers a variant of the DVRP and proposes a decentralized algorithm in which collaborators (Depot and Vehicle), both have only partial information about the entire system. The DVRP is modeled as a periodic re optimization of VRP using the proposed decentralized algorithm where collaborators exchange local information to achieve the best global objective for the current state of the system. We assume the existence of a dispatcher e.g., headquarter of the company who can communicate to vehicles in order to gather information and assigns the new visits to them. The effectiveness of the proposed decentralized coordination algorithm is further evaluated using benchmark data given in literature. The results show that the proposed method performed better than the compared algorithms which utilize the centralized coordination in 12 out of 21 benchmark problems.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.1-14
• /
• 1999

The simulation results of a small racing boat racing in steady wind and encountering waves are investigated by Nakato & Ha. The simulation of the race running is realized by referring the measured data of boats and the motions are described by a set of equations of motion in six degree of freedom as generals used in the aerodynamics. In this report, Nakato & Ha's motion equations are modified by equipping the flaps to generate the lift. The flaps of the racing boat could restrain considerably the boat from capsizing caused by superposed external disturbances, wind and encountering waves.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.1
• /
• pp.73-82
• /
• 2016

In order to extend the operational life of Underwater Moored Platforms (UMPs), a horizontal axis water turbine is designed to supply energy for the UMPs. The turbine, equipped with controllable blades, can be opened to generate power and charge the UMPs in moored state. Three-dimensional Computational Fluid Dynamics (CFD) simulations are performed to study the characteristics of power, thrust and the wake of the turbine. Particularly, the effect of the installation position of the turbine is considered. Simulations are based on the Reynolds Averaged Navier-Stokes (RANS) equations and the shear stress transport ${\kappa}-{\omega}$ turbulent model is utilized. The numerical method is validated using existing experimental data. The simulation results show that this turbine has a maximum power coefficient of 0.327 when the turbine is installed near the tail of the UMP. The flow structure near the blade and in the wake are also discussed.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.2
• /
• pp.53-63
• /
• 2016

Building Integrated Photovoltaic (BIPV) is one of the best ways to generate electric power using the solar energy, which is clean and inexhaustible energy resources. The most of BIPV modules have the form of GtoG (Glass to Glass) photovoltaic in building applications. Degradation leading to failure in photovoltaic modules is very important factor in BIPV modules. This paper analyzed the performance of various BIPV modules through outdoor exposure tests. Performance of three BIPV modules(c-Si type, a-Si type and DSSC type) with three installation angles influenced by sun light, outdoor temperature, and wind velocity was monitored and analyzed. As a result, c-Si type BIPV module outperforms other BIPV modules(a-Si type). In terms of power efficiency of the module, the installed angle of $45^{\circ}$ is better than others(90 degree, 0 degree). In addition, more realistic data of various BIPV system performance could be available through the field test and integrated building test. In this study, relationship of the BIPV system is identified module's installation angle, power generation, architectural performance, etc.

• Journal of Sport and Applied Science
• /
• v.4 no.3
• /
• pp.23-28
• /
• 2020

Purpose: This study sought to explore current status of children's swimming pool in Korea and to generate insights regarding safety management of children's swimming pool. Research design, data, and methodology: The study reviewed literatures including documents of Ministry of Culture, Sports and Tourism and sport facility-related articles. Furthermore, the study collected additional statistics via search engines. Results: First, numbers of swimming pools have been dramatically increased since 2016 and Korea experienced an increase of 37% from 2010 to 2019. Of the 611 indoor swimming pools, most swimming pools are located in Gyeonggi province with 27.7% (n=169). Seoul and Gyeonggi-do have the highest proportion of swimming pools in Korea. Second, in types of swimming pools, 47.6%(n=291) was children's swimming pool which is the highest proportion in the nation. Children's swimming pools are also mostly located in Seoul and Gyeonggi province with 57%. Third, of 372 profit swimming pools, children's pools show the highest number with 78%(n=291). Conclusions: Children's swimming pools are picking up faster than the other types of swimming pool. Yet, safety-related studies are still lack. This provides motivations to produce managerial insights from academia and business sectors. Moreover, more studies of legal issues should be conducted. Implications were discussed.

• Journal of Species Research
• /
• v.5 no.3
• /
• pp.261-263
• /
• 2016

In 2012, the NIBR started publishing the Journal of Species Research (JSR) as an international specialized journal of biological taxonomy focusing on taxonomic research. JSR Volume 5 Number 3, to be published in October 2016, has been planned as a 'Special Edition on New and Unrecorded Species of Invertebrates in Korea', and so it consists of the reports of 149 new and unrecorded invertebrate species (including protozoa) discovered in Korea. In future, the JSR should further accelerate the use of such methods to generate valid data for new species and effectively support the compilation of 'National List of Species of Korea'. In this way, it will contribute significantly to enrich for biodiversity in Korea.