• Journal of Environmental Science International
• /
• v.11 no.6
• /
• pp.463-470
• /
• 2002

Environmental protection and precaution are the most frequently considered issues in the recent research fields for our present and future surroundings. However, it seems that these environmental issues were less reflected in local-level development plans, and caused several cases of environmental pollution, therefore it became a major concern of local governments and the communities. The role of a 'Local EIA(Environment Impact Assessment)' can be a core issue for the positive preferences of the local-level development plans. Cases of Local EIA in Germany which have been implied successfully are reviewed to generate a local EIA movement and to produce a guideline for Korean local governments. The local EIA in Germany was broadly commenced in the middle of 1980s, and a decade later it was carried out for over 200 of local governments. To produce a better suggestion for Korean local EIA, comparison and analysis of detail data of the German local EIA was carried out, and tested for fourteen cities in Korea based on five categories: i) assessment subject, ii) assessment procedure, iii) main office for assessment, iv) assessment factor and v) assessment standard. Prior suggestions for greater preference of local EIA in Korea are: it is necessary that I) launch of a support system in central government to help the movement of local government; Ⅱ) a knowledge-based expert group in local government which has by all means of exclusive responsibility far any action(new application or performance of local EIA) : 111) establishment of 'environmental protection measure' in local government level for environmental precaution based on individual environmental character and values in their communities.

• Journal of Environmental Science International
• /
• v.23 no.11
• /
• pp.1835-1842
• /
• 2014

The goal of this study was to evaluate micro-bubble concentration ($C_{air}$) in water by air/water ratio (A/W ratio) with a micro-bubble generating pump. The estimation of micro-bubble concentration is based on the balance of inlet/outlet air and water flow rate. On net A/W ratio to be generated micro-bubble, we found that the obtained the $C_{air}$ are shown as a function of discharge pressure ($P_g$) of the micro-bubble generating pump. The correlation of the $C_{air}$ and the $P_g$ ($C_{air}=3.261P_g-1.754$) was adequately described by the least square methods with a high correlation coefficient (r = 0.9459) and calculated values fit the experimental data quite well. The $C_{air}$ was lower than theoretical dissolved air concentration ($C_{aq}$) calculated by Henry's law. The $C_{air}$ for being operated the micro-bubble generating pump was 6.75 - 39.53 mL/L, however, we found that the optimum of the $C_{air}$ to generate micro-bubble was the range from 10 to 12 mL/L.

• Phonetics and Speech Sciences
• /
• v.8 no.4
• /
• pp.89-95
• /
• 2016

The purpose of this work is to analyze and synthesize the pseudo-periodicity of voice using a source model. A speech signal has periodic characteristics; however, it is not completely periodic. While periodicity contributes significantly to the production of prosody, emotional status, etc., pseudo-periodicity contributes to the distinctions between normal and abnormal status, the naturalness of normal speech, etc. Measurement of pseudo-periodicity is typically performed through parameters such as jitter and shimmer. For studying the pseudo-periodic nature of voice in a controlled environment, through collected natural voice, we can only observe the distributions of the parameters, which are limited by the size of collected data. If we can generate voice samples in a controlled manner, experiments that are more diverse can be conducted. In this study, the probability distributions of vowel pitch variation are obtained from the speech signal. Based on the probability distribution of vocal folds, pulses with a designated jitter value are synthesized. Then, the target and re-analyzed jitter values are compared to check the validity of the method. It was found that the jitter synthesis method is useful for normal voice synthesis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.7
• /
• pp.717-722
• /
• 2007

Inverse synthetic aperture radar(ISAR) images represent two-dimensional(2-D) spatial distribution of electromagnetic scattering phenomenology against a target. Hence, they are usually used in the areas of automatic target recognition (ATR) or non-cooperative target recognition(NCTR), identifying a target using radar in a long distance. This paper makes use of Korea Miniature Synthetic Aperture Radar(KOMSAR) to generate ISAR images of a real and maneuvering aircraft. The data obtained from KOMSAR are processed to eliminate phase errors due to motion of a target, with the use of entropy-based ISAR autofocusing technique. Results show that we can successfully obtain ISAR images of a real aircraft, and the success of experiments implies that a significant step toward ATR using radar has been established.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.291-301
• /
• 2015

Product regulations specify requirements or constraints for products that manufacturers must comply with across the entire product lifecycle, from design and manufacture, through operation and maintenance, to recycling and disposal. This paper suggests a system framework and its essential components for the verification of a pressure vessel design using the industrial standards of Korea. The authors also present methods to generate design template data from legacy design systems and to construct a regulation knowledge base. The proposed framework is demonstrated through experiments involving pressure vessel design verification using a prototype system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.63-68
• /
• 2015

We consider a cell edge environment. In cell edge, a user interfered by signal which is generated by a base stations not including the user. In cell edge environment, that is, there are inter cell interference (ICI) as well as multi user interference (MUI). Coordinated multi-point transmission (CoMP) is a technique which mitigates ICI between base stations. In CoMP, therefore, base stations can coordinate with each other by sharing user state information (CSI) in order to mitigate ICI. To improve sum rate performance in CoMP, each base station should generate optimal user group and transmit data to users selected in the optimal user group. In this paper, we propose a user selection algorithm in CoMP. The proposed method use signal to interference plus noise ratio (SINR) as criterion of selecting users. Because base station can't measure accurate SINR of users, in this paper, we estimate SINR equation considering ICI as well as MUI. Also, we propose a user selection algorithm based on the estimated SINR. Through MATAL simulation, we verify that the proposed method improves the system sum rate by an average of 1.5 ~ 3 bps/Hz compared to the conventional method.

• Journal of Internet Computing and Services
• /
• v.12 no.4
• /
• pp.107-117
• /
• 2011

The appearance of Web has brought an substantial revolution to all fields of society such knowledge management and business transaction as well as traditional information retrieval. In this paper, we propose an EFASIT(Extended Fuzzy AHP and SImilarity Technology) model considering the emotion analysis. And we combine the Extended Fuzzy AHP Method(EFAM) with SImilarity Technology(SIT) based on the domain corpus information in order to efficiently retrieve the document on the Web. The proposed the EFASIT model can generate the more definite rule according to integration of fuzzy knowledge of various decision-maker, and can give a help to decision-making, and confirms through the experiment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.6
• /
• pp.14-22
• /
• 2014

An autonomous vehicle requires a technology of generating maps by recognizing surrounding environment. The recognition of the vehicle's environment can be achieved by using distance information from a 2D laser scanner and color information from a camera. Such sensor information is used to generate 2D or 3D maps. A 2D map is used mostly for generating routs, because it contains information only about a section. In contrast, a 3D map involves height values also, and therefore can be used not only for generating routs but also for finding out vehicle accessible space. Nevertheless, an autonomous vehicle using 3D maps has difficulty in recognizing environment in real time. Accordingly, this paper proposes the technology for generating 2D maps that guarantee real-time recognition. The proposed technology uses only the color information obtained by removing height values from 3D maps generated based on the fusion of 2D laser scanner and camera data.

• Journal of Fashion Business
• /
• v.19 no.6
• /
• pp.28-41
• /
• 2015

Properties of textile fabrics influence the appearance, aesthetics, and performance of garment. Drape and related properties of fabrics affect profoundly the static and dynamic appearance during wearer's movement. The three dimensional shape of the folded structure often deforms with time or with subtle vibration around the fabric specimen during the drape measurement. Due to the uneven and complex nature of fabrics, the overall shape of the fabric specimen on the drape tester often becomes unstable. There is a need to understand the fundamental mechanisms of how draping may generate pleasing forms. Two drape test methods, conventional Cusick drape test, and in-built drape tester, based on a depth camera, are compared. Fabric specimens including cotton, linen, silk, wool, polyester, and rayon are investigated for the fabric drape and other physical/mechanical parameters. Drape coefficient values of fabric specimens are compared based on the final drape images, together with the intermediate 3D drape images of the specimens during elevation process of the drape tester equipped with a stepper motor system. The correlation coefficient between the data based on the two methods is reasonably high. Another advantage from the depth camera system is that it allows further analysis of three-dimensional information regarding the fabric drape shape, including the shape of nodes or crest and trough.

• Journal of KIISE:Software and Applications
• /
• v.26 no.1
• /
• pp.157-157
• /
• 1999

Researches on the gesture recognition have become a very interesting topic in the computer vision area, Gesture recognition from visual images has a number of potential applicationssuch as HCI (Human Computer Interaction), VR(Virtual Reality), machine vision. To overcome thetechnical barriers in visual processing, conventional approaches have employed cumbersome devicessuch as datagloves or color marked gloves. In this research, we capture gesture images without usingexternal devices and generate a gesture trajectery composed of point-tokens. The trajectory Is spottedusing phase-based velocity constraints and recognized using the discrete left-right HMM. Inputvectors to the HMM are obtained by using the LBG clustering algorithm on a polar-coordinate spacewhere point-tokens on the Cartesian space .are converted. A gesture vocabulary is composed oftwenty-two dynamic hand gestures for editing drawing elements. In our experiment, one hundred dataper gesture are collected from twenty persons, Fifty data are used for training and another fifty datafor recognition experiment. The recognition result shows about 95% recognition rate and also thepossibility that these results can be applied to several potential systems operated by gestures. Thedeveloped system is running in real time for editing basic graphic primitives in the hardwareenvironments of a Pentium-pro (200 MHz), a Matrox Meteor graphic board and a CCD camera, anda Window95 and Visual C++ software environment.