• 제목/요약/키워드: General physics

검색결과 491건 처리시간 0.044초

기본물리량 어림의 정확성 및 방법에 대한 탐색 (Exploring the Accuracy and Methods of Estimation on Base Physical Quantities)

  • 송진웅;김혜선
    • 한국과학교육학회지
    • /
    • 제21권1호
    • /
    • pp.76-88
    • /
    • 2001
  • 본 연구는 길이, 질량, 시간, 온도와 같은 일부 기본 물리량에 대한 사람들의 어림의 정확성과 방법에 대해 탐색하였다. 대학 물리교육과의 구성원(학부 1학년부터 교수까지) 중 임의로 선정된 총 40명이 2종류의 대상물 세트에 대해 직관적 어림과 조작적 어림 활동을 수행하였다. 직관적 어림에서는 참여자들이 각 대상물을 직면하자마자 해당 물리량의 값을 어림하였으며, 조작적 어림에서는 별도의 대상물에 대해서 충분한 시간을 두고 다양한 가용한 방법들을 (예컨대, 길이를 어림하기 위해 연필을 활용하거나 시간을 어림하기 위해 맥박을 세거나) 동원하여 어림하였다. 연구의 결과는 다음과 같이 요약될 수 있겠다: (1) 길이, 질량, 온도에 대해서는 직관적 어림이 더 정확하였으나 시간에 대해서는 조작적 어림이 더 정확하였다. (2) 물리학에 대한 경험의 정도와 어림의 정확성 사이에는 정적인 상관관계가 존재하지 않았다. (3)일반적으로 길이에 대한 어림이 가장 정확하였으며 질량에 대한 어림은 가장 부정확하였다. (4) 사람들은 조작적 어림을 위해서 스스로의 다양한 방법을 사용하였는데, 예컨대 대상물 주변의 각종 사물들을 활용하거나 특정한 값을 갖는 마음 속의 측정 단위(즉, 30cm, 50cm, 1kg, 1근, 1초 등)들을 적용하였다.

  • PDF

Te-124 Target로 생산된 I-123 SPECT 영상에서의 조준기 선택 (Collimator Selection in Nuclear Medicine Imaging Using I-123 Generated by Te-124 Reaction)

  • 김희중;손혜경;봉정균;남기표;이희경
    • 대한핵의학회지
    • /
    • 제30권3호
    • /
    • pp.372-378
    • /
    • 1996
  • 목적 : 본 연구의 목적은 Te-124 반응으로 생산된 I-123을 이용하여 표지된 방사의약품을 이용할 때 저에너지용 조준기와 중에너지용 조준기가 SPECT에 미치는 영향을 비교 평가하는 것이다. 방법 : I-123을 채운 선선원을 이용 선선원과 조준기 사이에 풀렉시 유리판을 넣고 조준기로부터 선선원까지의 거리 5cm, 10cm, 15cm에서 영상을 얻었다. 비슷한 방법으로 I-123을 채운 패트리 접시, 2차원 호프만 모형, 3차원 제젝 모형, 3차원 호프만 모형을 영상화하였다. 서로 다른 조준기에서의 장단점을 보기 위해 공간해상도, 예민도, 산란성등의 특성이 비교되었다. 결과 : LEUHRP와 MEGP 대한 FWHM, FWTM, 그리고 예민도는 각각 (9.27mm, 61.27mm, $129CPM/{\mu}Ci$) 그리고 (10.53mm, 23.17mm, $105CPM/{\mu}Ci$)였다. 2차원 호프만 뇌 모형의 영상질은 LEUHRP가 MEGP보다 우수하였다. 그러나 3차원 제젝모형과 호프만 모형에서의 영상질은 MEGP가 LEUHRP보다 우수하였으며 그 이유는 3차원 영상 조건에서의 산란영향 때문인 것으로 생각된다. 결론 : 이상의 결과로 보아 [I-123]MIBG, [I-123]${\beta}$-CIT, 또는 [I-123]IPT의 3차원 영상 검사를 위하여 MEGP가 LEUHRP보다 우수한 영상을 제공할 것으로 생각된다.

  • PDF

안경 렌즈의 국소적 투과율 측정을 위한 방법에 관한 연구 (A Study on the Method for the Local Transmittance Measurements of the Ocular Lens)

  • 박상국;이형철;육도진;성덕용;강성수
    • 한국안광학회지
    • /
    • 제19권4호
    • /
    • pp.471-477
    • /
    • 2014
  • 목적: 국소 투과율 현미경을 이용하여 안경렌즈의 투과율 분포를 분석함으로써 렌즈의 광학적 균질성을 연구하고자 한다. 방법: 안경렌즈 표면에 집광된 레이저의 투과율을 광검출기와 락인앰프로 측정하고 그 결과를 분석하였다. 코팅되지 않은 렌즈와 멀티 코팅이 된 렌즈 그리고 누진렌즈가 시료로서 분석되었다. 결과: 누진렌즈와 물리적 자극이 가해진 렌즈의 측정 결과에서 국소 투과율 현미경 분석 결과가 광학 현미경을 통한 측정 결과와 높은 일치도를 보였다. 또한 광학적 결함이 있는 곳에서 투과율의 평균값은 감소하고 표준편차는 증가하였다. 자극이 가해지지 않은 렌즈에서는 반사방지 코팅의 유무가 투과율에 큰 영향을 미치는 것을 국소 투과율 현미경과 일반적 투과율 분석 모두에서 공통적으로 분석되었다. 결론: 시료에 다양한 자극이 가해졌을 때 투과율의 분포에 변화가 생김을 국소 투과율 현미경을 통해 확인하였다. 국소 투과율 현미경을 통한 이러한 분석은 렌즈 혹은 코팅막의 균일도를 평가 혹은 확인할 수 있는 하나의 방법으로 활용될 수 있다.

공학교육에서 하브루타 수업방식의 효과 분석 (Analysis of the Effect of the Havruta Method in Engineering Education)

  • 엄미리;이영인
    • 융합정보논문지
    • /
    • 제10권1호
    • /
    • pp.149-157
    • /
    • 2020
  • 본 연구의 목적은 공대 대학수업에 하브루타 방식을 적용하여 실제적으로 학습자의 역량에 변화가 있는지를 탐색하는 것으로, 대학수업에서의 효과적 운영을 위한 기초자료를 제공하고자 한다. <대학물리및실험2>를 수강하는 105명의 학습자들을 대상으로 하였고, 선행연구들을 탐색하여 하브루타 수업에서의 학습자 역량으로 학습준비도능력, 학업적 자기효능감, 의사소통능력을 선정하고 연구도구를 활용하여 실험을 진행하였다. 연구는 하브루타 수업적용을 위한 수업설계, 실험설계, 사전검사, 실험처치, 사후검사 순으로 진행하고 SPSS 21.0 for window를 활용하여 사전-사후 학습자 역량 변화를 비교·분석하였다. 첫째, 학습준비도능력은 사전-사후검사를 비교한 결과 통계적으로 유의미한 차이가 있으며, 특히 하위역량 중 학습에 대한 애착, 학습기회에 대한 개방성, 학습에 대한 주도성/독립성에서 긍정적인 역량 변화가 있는 것으로 나타났다. 둘째, 학업적 자기효능감은 사전-사후검사를 비교한 결과 통계적으로 유의미한 차이가 없는 것으로 나타났다. 셋째, 의사소통능력은 사전-사후검사를 비교한 결과 통계적으로 유의미한 차이가 있으며, 특히 하위역량 중 주도적 의사소통에서 긍정적인 역량 변화가 있는 것으로 나타났다. 도출된 연구결과는 교수자 중심의 교육에서 탈피하여 공대 수업에 학생중심의 하브루타 방식을 적용하여 효과를 탐색한 것으로, 공대 수업이나 대학수업에 하브루타를 적용하고 싶은 교수자나 수업설계자들에게 좋은 지침 및 기초자료가 될 수 있을 것으로 기대된다.

2015 개정 과학과 일반선택과목의 수강 현황 및 선택률 제고 방안 탐색 (Exploration of the Status of Course Completion and Ways to Raise Selection Rates of General Elective Courses in the 2015 Revised Science Curriculum)

  • 이일;곽영순
    • 한국과학교육학회지
    • /
    • 제40권2호
    • /
    • pp.217-226
    • /
    • 2020
  • 본 연구의 목적은 2015 개정 교육과정 적용 2년차를 맞이하여 고등학교 2학년의 과학과 일반선택과목 수강 현황을 파악하고 과학과 교육과정 개선과 선택률 제고 방안에 대한 과학교사들의 인식을 조사함으로써 2015 개정 교육과정의 안착과 고교학점제에서 과학과 선택과목의 방향성에 대한 시사점을 도출하려는 것이다. 이를 위해 12개 시·도 교육청의 협조를 얻어 2018년 고등학교 신입생들이 수강한 과학과 선택과목의 연도별, 학교유형별, 지역별 현황을 취합하여 분석하였다. 또한 9명의 고등학교 과학교사를 초점집단으로 구성하여 과학과 선택과목 교육과정의 편성 및 운영에 대한 개선과 선택률 제고 방안에 대한 심층 면담을 진행하였다. 주요 연구결과를 살펴보면, 2019년 11월 기준으로 12개 시·도 교육청의 2018년 고등학교 신입생들의 과학과 일반선택과목 수강자 수는 물리학I 163,710명, 화학I 216,754명, 생명과학I 290,736, 지구과학I 200,861명이며, 학생 1인당 수강 과목의 수는 2.4개로 확인되었다. 학교유형별로는 자율고의 수강 비율이 가장 높았으며, 특목고와 특성화고의 비율은 매우 저조하였다. 일반선택과목의 학기당 이수단위는 3단위(61.5%)와 2단위(28.7%)가 대부분이었으며 이수단위별 수강 비율은 교육청 간에 편차가 있었다. 고등학교 과학교사들은 고교학점제에 대비한 과학과 선택과목 교육과정 개정 방안으로 한 학기에 이수할 수 있는 3단위 분량으로 선택과목을 재구성, 지식보다는 역량 중심의 내용 구성, 교사의 수업 역량을 신장하기 위한 교사공동체와 교과 중심 연수의 필요성 등을 주장하였다. 연구결과를 토대로 고교학점제에 대비한 과학과 선택과목 교육과정 운영 및 개선 방안을 제안하였다.

셀 몰드 주조한 SSC13 엘보우 피팅 주강의 고용화율에 따른 델타 페라이트 분율 변화와 내부식특성 (Effect of Austenitizing Ratio on the Delta Ferrite Volume Fraction and Corrosion Resistance of Shell Mold Cast SSC13 Elbow Fitting)

  • 김국진;임수근;주형규;박성준
    • 한국주조공학회지
    • /
    • 제35권5호
    • /
    • pp.109-113
    • /
    • 2015
  • In this study, the measurement of FN (ferrite volume fraction) and the solution annealing ratio at a temperature of $1130^{\circ}C$ were determined with 15A elbow fittings of shell cast SSC13, and the corrosion resistance with and without austenitizing solution annealing were investigated in comparison with AISI304. The delta ferrite phase was observed in the material due to the slow cooling effect of the shell mold casting. However, the delta ferrite phase decreased gradually with the solution annealing at a temperature of $1130^{\circ}C$. The hardness generally decreased with a heat treatment; however, its corrosion resistance was improved with the heat treatment. In addition, when a passivation treatment was applied, its corrosion ratio showed the lowest value. The pattern of general corrosion decreased due to the decrease in the delta ferrite phase with the solution annealing treatment. Consequently, it is suggested that the corrosion resistance of SSC13 elbow fittings can be improved by increasing the ratio of any solution annealing treatment used and by decreasing the ferrite phase. The relationship between the ratio of solution annealing and delta ferrite is expressed as follows: SA (solution annealing ratio,%) = 98 - FN (ferrite volume fraction, %).

한국의 주요 대도시에 대한 일 최고 및 최저 기온의 장기변동 경향과 건강에 미치는 영향 전망 (Long-term Trends of Daily Maximum and Minimum Temperatures for the Major Cities of South Korea and their Implications on Human Health)

  • 최병철;김지영;이대근
    • 대기
    • /
    • 제17권2호
    • /
    • pp.171-183
    • /
    • 2007
  • Trends of daily maximum and minimum temperatures in major cities of South Korea (Seoul, Busan, Incheon, Daegu, and Ulsan) during the past 40 years (1961-2000) were investigated. Temperature records for the Chupungryeong station were compared with those of the large cities because of the rural environment of the station. There were distinct warming trends at all stations, although the warming rates depend on each station's local climate and environment. The warming rates in Korea are much greater than the global warming trends, by a factor of 3 to 4. The most increasing rate in daily maximum temperature was at Busan with $0.43^{\circ}C$ per decade, the most increasing rate in daily minimum temperature was at Daegu with $0.44^{\circ}C$ per decade. In general, the warming trends of the cities were most pronounced in winter season with an increasing rate of $0.5^{\circ}C$/decade at least. Diurnal temperature range shows positive or negative trends according to the regional climate and environmental change. The frequency distribution of the daily temperatures for the past 40 years at Seoul and Chupungryeong shows that there have been reductions in cold day frequencies at both stations. The results imply that the impacts on human health might be positive in winter and adverse in summer if the regional warming scenario by the current regional climate model reflects future climate change in Korea.

Energy separation and carrier-phonon scattering in CdZnTe/ZnTe quantum dots on Si substrate

  • 만민탄;이홍석
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
    • /
    • pp.191.2-191.2
    • /
    • 2015
  • Details of carrier dynamics in self-assembled quantum dots (QDs) with a particular attention to nonradiative processes are not only interesting for fundamental physics, but it is also relevant to performance of optoelectronic devices and the exploitation of nanocrystals in practical applications. In general, the possible processes in such systems can be considered as radiative relaxation, carrier transfer between dots of different dimensions, Auger nonradiactive scattering, thermal escape from the dot, and trapping in surface and/or defects states. Authors of recent studies have proposed a mechanism for the carrier dynamics of time-resolved photoluminescence CdTe (a type II-VI QDs) systems. This mechanism involves the activation of phonons mediated by electron-phonon interactions. Confinement of both electrons and holes is strongly dependent on the thermal escape process, which can include multi-longitudinal optical phonon absorption resulting from carriers trapped in QD surface defects. Furthermore, the discrete quantized energies in the QD density of states (1S, 2S, 1P, etc.) arise mainly from ${\delta}$-functions in the QDs, which are related to different orbitals. Multiple discrete transitions between well separated energy states may play a critical role in carrier dynamics at low temperature when the thermal escape processes is not available. The decay time in QD structures slightly increases with temperature due to the redistribution of the QDs into discrete levels. Among II-VI QDs, wide-gap CdZnTe QD structures characterized by large excitonic binding energies are of great interest because of their potential use in optoelectronic devices that operate in the green spectral range. Furthermore, CdZnTe layers have emerged as excellent candidates for possible fabrication of ferroelectric non-volatile flash memory. In this study, we investigated the optical properties of CdZnTe/ZnTe QDs on Si substrate grown using molecular beam epitaxy. Time-resolved and temperature-dependent PL measurements were carried out in order to investigate the temperature-dependent carrier dynamics and the activation energy of CdZnTe/ZnTe QDs on Si substrate.

  • PDF

방사성동위원소 누설 점검을 위한 건식 및 습식 문지름 시험법 연구 (A Study on Dry and Wet Wipe Test for Radioisotope Leakage Checking)

  • 박상민;유승희;최규석;이화형;홍사용
    • 한국방사선학회논문지
    • /
    • 제12권3호
    • /
    • pp.305-312
    • /
    • 2018
  • 유리 표면에 방사성동위원소 $^{14}C$를 고착시키고 문지름 시험을 통해 시험용지별 전이 인자와 표면 형상을 관찰하여 방사성동위원소 누설 점검을 위한 건식 및 습식 문지름 시험법을 연구하였다. 건식 문지름 시험법은 티슈 용지가 종이 필터를 대체 가능할 정도로 2배 높은 전이 인자를 보였고, 습식 문지름 시험법은 종이 필터 용지가 티슈 용지에 비하여 3배 높은 전이 인자를 보였다. 일반적으로 누설 점검을 위해 종이 필터를 사용하고 있지만 건식 문지름 시험법에서 티슈 용지가 대안이 될 수 있음을 보였다.

단일입자재현법(單一粒子再現法)을 활용한 고고유물의 진위판별 연구 (Authentication Test of Archaeological Materials using Single Grain Regenerative Dose Method)

  • 김명진;윤민영;홍덕균
    • 보존과학회지
    • /
    • 제23권
    • /
    • pp.73-80
    • /
    • 2008
  • 이 연구에서는 고고학 유물의 진위여부를 판단하기 위하여 미세시료채취법을 적용하여 시료를 채취한 후 화학적으로 분리된 세립 석영 입자의 고고선량을 산출하였다. 진위판별 연구에 앞서 미세시료채취법의 타당성은 백제무령왕릉 출토 전(塼)에서 산출된 고고선량 값들로부터 입증되었다. 이를 바탕으로 고구려 시대에 제작되었다고 주장되는 4점의 고고학 유물에 미세시료채취법을 적용하여 극소량의 시료를 채취한 후 단일입자재현법으로 고고선량을 산출하였다. 모든 유물에 대하여 고고선량 값은 0.2Gy 이하로 매우 낮았으며 단일시료재현법으로 산출된 값과 비교한 결과 매우 신뢰도가 높음을 알 수 있었다. 그러므로 유물의 고고학적 상황과 국내에서 고고선량은 평균적으로 1,000년 당 약 3.5Gy 내외의 값을 가진다는 점으로 미루어 판단하건데, 이 유물들은 고구려 시대에 제작된 유물이 아닐 가능성이 매우 높았다.

  • PDF