• Land and Housing Review
• /
• v.12 no.3
• /
• pp.109-119
• /
• 2021

Global warming caused by greenhouse gas emissions has rapidly increased abnormal climate events and geotechnical engineering hazards in terms of their size and frequency accordingly. Biopolymer-based soil treatment (BPST) in geotechnical engineering has been implemented in recent years as an alternative to reducing carbon footprint. Furthermore, thermo-gelating biopolymers, including agar gum, gellan gum, and xanthan gum, are known to strengthen soils noticeably. However, an explicitly detailed evaluation of the correlation between the factors, that have a significant influence on the strengthening behavior of BPST, has not been explored yet. In this study, machine learning regression analysis was performed using the UCS (unconfined compressive strength) data for BPST tested in the laboratory to evaluate the factors influencing the strengthening behavior of gellan gum-treated soil mixtures. General linear regression, Ridge, and Lasso were used as linear regression methods; the key factors influencing the behavior of BPST were determined by RMSE (root mean squared error) and regression coefficient values. The results of the analysis showed that the concentration of biopolymer and the content of clay have the most significant influence on the strength of BPST.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.4
• /
• pp.333-341
• /
• 2021

Benzodiazepines (BDZs) drugs act on the GABA_A receptor, function as nerve suppressors, and are used to treat anxiety, insomnia, and panic disorder. We analyzed the data of 30 individuals to determine any differences in the sleep-electroencephalogram findings among individuals varying in age, benzodiazepine use, and duration of benzodiazepine use. Comparisons between users and non-users of benzodiazepines, short-term and long-term users, older and younger users, and older short-term and older long-term users, were achieved using electroencephalographic findings obtained through polysomnography. The parameters evaluated included sleep latency, sleep efficiency, sleep-stage percentages, number of sleep spindles, and average frequency of sleep-spindle. The difference between benzodiazepine users and non-users was significant with respect to sleep-stage percentages and average frequency of sleep-spindle. Older and younger users differed significantly with respect to sleep efficiency and sleep-stage percentages, whereas significant difference for sleep efficiency was obtained between long-term and short-term users. Taken together, our results indicate that BDZ consumption suppresses slow-wave sleep and increases the frequency of sleep spindles.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.133-138
• /
• 2019

This study evaluated the tensile properties of SAPH440, a hot-rolled steel for automotive structural applications, based on GMAW lap welding, the welding current, the welding voltage, and the feed rate. Tensile tests were performed according to the joint parameters of the GMAW process, for which specimens were fabricated according to KS B ISO 9018 by lap welding. The bead appearance was observed in each condition, and the weldability was evaluated by the tensile test. Higher the welding current resulted in a deeper weld, but the tensile strength was not significantly different from when the parameter was fixed due to the fracture of the base material. When the current was higher than the voltage, as in the case of a welding current of 200 A and welding voltage of 17 V, a large amount of spatter is generated, the welding is unstable, and the welded part breaks. Higher the voltage resulted in the bead not causing defects in general, and it also affected the weldability. If the current and voltage were too low, the welding was not performed normally, and the tensile strength could not be measured. However, as the current increased, the increase of the voltage and the feed rate did not affect the tensile strength.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.6
• /
• pp.67-77
• /
• 2018

Currently, there are many problems due to the decline in school-age population. Moreover, Korea has the largest number of universities compared to the population, and the university enrollment rate is also the highest in the world. As a result, the minimum student retention rate required for the survival of each university is becoming increasingly important. The purpose of this study was to examine the effects of reducing the number of graduates of education and the social climate that prioritizes employment. And to determine what the basic direction is for students to manage the student retention rate, which can be maintained from admission to graduation, to determine the optimal input variables, Based on the input parameters, we will make associative analysis using apriori algorithm to collect training data that is most suitable for maintenance rate management and make base data for development of the most efficient Deep Learning module based on it. The accuracy of Deep Learning was 75%, which is a measure of graduation using decision trees. In decision tree, factors that determine whether to graduate are graduated from general high school and students who are female and high in residence in urban area have high probability of graduation. As a result, the Deep Learning module developed rather than the decision tree was identified as a model for evaluating the graduation of students more efficiently.

• Journal of Korea Water Resources Association
• /
• v.52 no.4
• /
• pp.301-312
• /
• 2019

The importance of the dual drainage system model has increased as the urban flood damage has increased due to the increase of local storm due to climate change. The dual drainage model is a model for more accurately expressing the phenomena of surface flow and conduit flow. Surface runoff and pipe runoff are analyzed through the respective equations and parameters. And the results are expressed visually in various ways. Therefore, inundation analysis results of dual drainage model are used as important data for urban flood prevention plan. In this study, the applicability of the COBRA model, which can be interpreted by combining the dual drainage system with the natural watershed and the urban watershed, was investigated. And the results were compared with other dual drainage models (XP-SWMM, UFAM) to determine suitability of the results. For the same watershed, the XP-SWMM simulates the flooding characteristics of 3 types of dual drainage system model and the internal flooding characteristics due to the lack of capacity of the conduit. UFAM showed the lowest inundation analysis results compared with the other models according to characteristics of consideration of street inlet. COBRA showed the general result that the flooded area and the maximum flooding depth are proportional to the increase in rainfall. It is considered that the COBRA model is good in terms of the stability of the model considering the characteristics of the model to simulate the effective rainfall according to the soil conditions and the realistic appearance of the flooding due to the surface reservoir.

• The Journal of Fisheries Business Administration
• /
• v.49 no.3
• /
• pp.85-99
• /
• 2018

This study is to compare and evaluate the estimating method of WTP(willingness to pay) for the valuation of oceans and fisheries resources with non-market goods characteristics using contingent valuation method. In general, when estimating parameters of the WTP function, we should take into account the assumption of probability distribution, inclusion of covariates, method of inducement of payment, and the treatment of 0 payment intention and resistance responses. This study utilizes survey data that was used to estimate the value of fisheries resource protection zones, with a total of 1,200 samples. The main results of this study are summarized as follows: First, the final willness to pay amount is estimated at a statistical significance of less than 1 percent, and the distribution of the final willness to pay amount is from \6,926 of the double bounded dichotomous model to \10,721 of the spike model. Second, the willness to pay amount based on assumptions about the normal and logistic probability distributions are estimated to be \9,429 and \9,370 respectively, so there was no significant difference. Third, the willness to pay amount of the single bounded dichotomous model and the double bounded dichotomous model are estimated to be \8,951 and \6,926 respectively, making a relatively large difference. Fourth, the willness to pay amount of the model without covariates and the model with covariates are estimated to be \9,429 and \8,951, respectively, so the willness to pay amount is underestimated when the covariates are included. Fifth, the Spike model that considers zero payment intention and resistance response estimates \10,405 as the highest payment in this study. Finally, the CVM analysis guidelines proposed by the Korea Development Institute (KDI) are estimated to be \9,749 and \10,405 respectively, depending on including no covariates and with covariates. Compared to other models, the final willness to pay amount is not estimated underestimated. Therefore this study suggests the use of KDI's guidance under government public policy projects. In view of these results, the estimating model for willness to pay amount model will be selected by considering the sample size, the suitability of the model, the sign of the estimated coefficient, the statistical significance, the ratio of the zero payment intention and the payment rejection. And, for CVMs on government public policy projects, it is desirable to estimate by the method proposed by the KDI.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.4
• /
• pp.267-277
• /
• 2019

Photogrammetry and computer vision are identical in determining the three-dimensional coordinates of images taken with a camera, but the two fields are not directly compatible with each other due to differences in camera lens distortion modeling methods and camera coordinate systems. In general, data processing of drone images is performed by bundle block adjustments using computer vision-based software, and then the plotting of the image is performed by photogrammetry-based software for mapping. In this case, we are faced with the problem of converting the model of camera lens distortions into the formula used in photogrammetry. Therefore, this study described the differences between the coordinate systems and lens distortion models used in photogrammetry and computer vision, and proposed a methodology for converting them. In order to verify the conversion formula of the camera lens distortion models, first, lens distortions were added to the virtual coordinates without lens distortions by using the computer vision-based lens distortion models. Then, the distortion coefficients were determined using photogrammetry-based lens distortion models, and the lens distortions were removed from the photo coordinates and compared with the virtual coordinates without the original distortions. The results showed that the root mean square distance was good within 0.5 pixels. In addition, epipolar images were generated to determine the accuracy by applying lens distortion coefficients for photogrammetry. The calculated root mean square error of y-parallax was found to be within 0.3 pixels.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.9
• /
• pp.5-13
• /
• 2019

The soil-water characteristic curve (SWCC) plays an important role in determining the soil suction parameters required to predict the seepage or shear behaviors of unsaturated soils. In addition, path dependency of the SWCC affects the mechanical and hydrologic behaviors. In general, there is a disadvantage that it takes a long time to measure both the drying and wetting paths of the SWCC by a stepwise pressurization method. Thus, the continuous pressurization method as an improved testing method for the SWCC was suggested, and the testing time for two paths of the SWCC was significantly shorter than the conventional methods. For the applicability evaluation of this method, the results of the SWCC obtained by the stepwise pressurization method and the evaporation method in this study were compared to the result obtained from this method. As a result, it was found that the difference among three methods was negligible, and the testing time of the continuous pressurization method was greatly decreased. Therefore, it can be said that it is possible to quickly and accurately measure the SWCC under various conditions by the continuous pressurization method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.5
• /
• pp.467-474
• /
• 2019

In this paper, we propose a novel method to improve FPS while maintaining the accuracy of YOLO v2 model in NVIDIA Jetson TX1. In general, in order to reduce the amount of computation, a conversion to an integer operation or reducing the depth of a network have been used. However, the accuracy of recognition can be deteriorated. So, we use methods to reduce computation and memory consumption through adjustment of the filter size and integrated computation of the network The first method is to replace the $3{\times}3$ filter with a $1{\times}1$ filter, which reduces the number of parameters to one-ninth. The second method is to reduce the amount of computation through CBR (Convolution-Add Bias-Relu) among the inference acceleration functions of TensorRT, and the last method is to reduce memory consumption by integrating repeated layers using TensorRT. For the simulation results, although the accuracy is decreased by 1% compared to the existing YOLO v2 model, the FPS has been improved from the existing 3.9 FPS to 11 FPS.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.4
• /
• pp.585-591
• /
• 2019

Objective: This study investigated carcass characteristics and meat quality of purebred Pakchong 5, crossbred pigs sired by Pakchong 5, and crossbred pigs sired by Duroc. Methods: Forty-eight pigs (average body weight of 22.25 kg) were composed of three groups as purebred Pakchong 5 (PP), Large $White{\times}Landrace$ pigs sired by Pakchong 5 (LWLRP), and Large $White{\times}Landrace$ pigs sired by Duroc (LWLRD). Each group consisted of eight gilts and eight barrows. At 109-day-raising period, pigs were slaughtered, and carcass characteristics were evaluated. Longissimus thoracis (LT) muscles from left side of carcasses were evaluated for meat quality and chemical composition. Data were analyzed using general linear model procedure, where group, sex, and their interaction were included in the model. Results: The PP had greater carcass, total lean, and ham percentages than crossbred pigs (p<0.05). LWLRP had thicker backfat and more carcass fat percentage than LWLRD (p<0.05). There were no differences (p>0.05) on cutting percentages from tender loin, loin, boston butt, and picnic shoulder among groups. The PP and LWLRP had larger loin eye area (LEA) than LWLRD (p<0.05). Gilts had more loin percentage and lower $L^*$ value than barrows (p<0.05). No meat color parameters ($L^*$, $a^*$, and $b^*$) were affected by groups (p>0.05). PP and LWLRP had larger muscle fiber diameters than LWLRD (p<0.05). However, water holding capacity, Warner-Bratzler shear force values, and chemical composition of LT were not affected by group or sex (p>0.05). Conclusion: Pakchong 5 purebred has good carcass and lean percentages. Compared to Duroc crossbred pigs, Pakchong 5 crossbreds have similar carcass and lean percentages, larger LEA, and slightly more carcass fat, with comparable meat quality and chemical composition. Pakchong 5 boars are more affordable for very small- to medium-scale pig producers.