• 환경영향평가
• /
• 제20권5호
• /
• pp.641-649
• /
• 2011

The ground vibration has effect on the human body and the nearby structure. However, it was very difficult to estimate the damage of structure caused by the vibration. Especially, ground vibration must be estimated on the bottom of structure because it was made up of several mediums. In this study, it was considered about the shock vibration on medium characteristics as calculating the peak particle velocity and analysing the vibration waveform. The results are as follows : Firstly, the correlation coefficient of PPV(Peak Particle Velocity) and SD(Scaled Distance) was very high at the vertical component, which was represented to 0.991 in general ground medium and each 0.989, 0.961, 0.925 in concrete medium. And also, the vibration waveform at the vertical component was very good in all mediums. Secondly, the vibration waveform at the longitudinal component was represented to a great amplitude and phase difference in all mediums. It was considered that the vibration waveform occurred the damping when particle velocity by shock vibration was propagated through other medium. Thirdly, the vibration waveform in concrete medium was represented to variation of amplitude in the order of RC medium, NC=H medium, NC=S medium at the vertical component. It was considered that the particle velocity propagated fast when a medium have a big strength and density.

• 한국군사과학기술학회지
• /
• 제15권2호
• /
• pp.208-214
• /
• 2012

The spectral radiance received by a remote sensor is consisted of the self-emitted component directly from the target surface, the reflected component of the solar irradiance at the target surface, and the scattered component by the atmosphere without ever reaching the object surface. In general, the self-emitted component is the most important part in the infrared signatures from the target. We measured the solar irradiation, sky irradiation, air temperature, wind velocity, wind direction, relative humidity, and atmospheric pressure together with the surface temperatures of rectangular parallelepiped targets. The measured diurnal surface temperature variations on the three different rectangular parallelepiped targets constructed by the steel, aluminum and bakelite are obtained at the same time intervals. The measured surface temperature results show that the top surface temperature of bakelite recorded up tp $7.6^{\circ}C$ higher than that of aluminium and $6.1^{\circ}C$ higher than that of steel at 11 AM on the sunny condition. A complete set of measured data including the surface temperature of rectangular parallelepiped targets together with the detailed weather information can be a valuable reference for future study.

• Earthquakes and Structures
• /
• 제5권1호
• /
• pp.49-65
• /
• 2013

This article presents the statistical characteristics of elastic floor acceleration spectra that represent the peak response demand of non-structural components attached to a nonlinear supporting frame. For this purpose, a set of stiff and flexible general moment resisting frames with periods of 0.3-3.6 sec. are analyzed using forty-nine near-field strong ground motion records. Peak accelerations are derived for each single degree of freedom non-structural component, supported by the above mentioned frames, through a direct-integration time-history analysis. These accelerations are obtained by Floor Acceleration Response Spectrum (FARS) method. They are statistically analyzed in the next step to achieve a better understanding of their height-wise distributions. The factors that affect FARS values are found in the relevant state of the art. Here, they are summarized to evaluate the amplification and/or reduction of FARS values especially when the supporting structures undergo inelastic behavior. The properties of FARS values are studied in three regions: long-period, fundamental-period and short-period. Maximum elastic acceleration response of non-structural component, mounted on inelastic frames, depends on the following factors: inelasticity intensity and modal periods of supporting structure; natural period, damping ratio and location of non-structural component. The FARS values, corresponded to the modal periods of supporting structure, are strongly reduced beyond elastic domain. However, they could be amplified in the transferring period domain between the mentioned modal periods. In the next step, the amplification and/or reduction of FARS values, caused by inelastic behavior of supporting structure, are calculated. A parameter called the response acceleration reduction factor ($R_{acc}$), has been previously used for far-field earthquakes. The feasibility of extending this parameter for near-field motions is focused here, suggested repeatedly in the relevant sources. The nonlinearity of supporting structure is included in ($R_{acc}$) for better estimation of maximum non-structural component absolute acceleration demand, which is ordinarily neglected in the seismic design provisions.

• 한국컴퓨터정보학회논문지
• /
• 제26권11호
• /
• pp.217-225
• /
• 2021

이 논문은 데이터 큐잉 알고리즘과 의약품 빅데이터를 통해 약품 성분-성분 간의 정보와 질병-성분 간의 정보를 지원함으로써 의약품 다약제 복용 시 부작용이 발생 가능한 약물 정보를 사용자에게 제공하기 위한 시스템을 제안하고 구현한다. 또한, 의약품 성분에 더하여 복용이 금지된 의약품, 공급업체, 유통업체의 정보 등을 제공함으로써 의료 전문가뿐만 아니라 일반 사용자의 의약품 복용에 대한 불안감을 덜어줄 수 있다. 제공되는 대표적인 정보는 두 가지 약물 사이에서 일어나는 부작용, 특정 의약품의 주성분과 효능, 동일한 제약회사에서 제조된 의약품, 만성 질환 환자가 주의해야 할 약품 성분 정보이다. 앞으로, 희귀병 약이나 신약에 대한 정보를 수집하여 데이터를 업데이트하는 것이 필요하다.

• Metals and materials international
• /
• 제24권6호
• /
• pp.1346-1358
• /
• 2018

A novel additive manufacturing method with TIG-MIG hybrid heat source was applied for fabricating 5356 aluminum alloy component. In this paper the microstructure evolution, mechanical properties and fracture morphologies of both as-deposited and heat-treated component were investigated, and how these were affected by different heat-treated temperature. The as-deposited microstructure showed dominant equiaxed grains with second phase, and the size of them is coarse in the bottom region, medium in the middle region and fine in the top region owing to different thermal cycling conditions. Compared with as-deposited microstructure, the size of grain becomes large and second phases gradually dissolve in the matrix as heat-treated temperature increase. Different microstructures determine the mechanical properties of component. Results show that average ultimate tensile strength enhances from 226 to 270 MPa and average microhardness increases from 64.2 to 75.3 HV0.1 but ductility decreases from 33 to 6.5% with heat-treated temperature increasing. For all components, the tensile properties are almost the same in the vertical direction (Z) and horizontal direction (Y) due to equiaxed grains, which exhibits isotropy, and the mechanisms of these are analyzed in detailed. In general, the results demonstrate that hybrid arc heat source has the potential to fabricate aluminum alloy component.

• 한국재료학회지
• /
• 제32권12호
• /
• pp.538-544
• /
• 2022

In existing ceramic mold manufacturing processes, inorganic binder systems (Si-Na, two-component system) are applied to ensure the effective firing strength of the ceramic mold and core. These inorganic binder systems makes it possible to manufacture a ceramic mold and core with high dimensional stability and effective strength. However, as in general sand casting processes, when molten metal is injected at room temperature, there is a limit to the production of thin or complex castings due to reduced fluidity caused by the rapid cooling of the molten metal. In addition, because sodium silicate generated through the vitrification reaction of the inorganic binder is converted into a liquid phase at a temperature of 1,000 ℃. or higher, it is somewhat difficult to manufacture parts through high-temperature casting. Therefore, in this study, a high-strength ceramic mold and core test piece with effective strength at high temperature was produced by applying a Si-Na-Ti three-component inorganic binder. The starting particles were coated with binary and ternary inorganic binders and mixed with an organic binder to prepare a molded body, and then heat-treated at 1,000/1,350/1,500 ℃ to prepare a fired body. In the sample where the two-component inorganic binder was applied, the glass was liquefied at a temperature of 1,000 ℃ or higher, and the strength decreased. However, the firing strength of the ceramic mold sample containing the three-component inorganic binder was improved, and it was confirmed that it was possible to manufacture a ceramic mold and core via high temperature casting.

• 열처리공학회지
• /
• 제36권1호
• /
• pp.22-32
• /
• 2023

In general, when scrap is dissolved in an electric arc furnace, the amount of electric furnace steel dust (EAFD) generated is about 1.5% of the scrap charge amount, and the electric furnace steel dust collected by the bag filter is charged into the Rotary Kiln or Rotary Hearth Furnace (RHF), and the zinc component is recovered as crude zinc oxide, at which time a clinker of Fe-Base is generated. In this research, first, for the efficient resource conversion of electric furnace steel dust, a reduction and roasting experiment was conducted and the reaction kinetics was examined. As a result of the experiment, it was observed that the reduction and roasting reaction was actively conducted in the range of 1100~1150℃, and melting occurred in the range of 1250℃. In the past, this clinker was widely used as a roadbed material for road construction and an Fe-Source for cement production, but in recent years, it has been mainly reclaimed due to strengthening environmental standards. However, landfill treatment is by no means a desirable treatment method due to environmental pollution caused by leachate, expensive landfill costs, and waste of Fe resources. Therefore, in order to more actively recycle the Fe component in the clinker, first of all the clinker was pulverized into an optimal particle size, and anthracite and binder (starch) were added to the magnetic material obtained by specific gravity and magnetic separation for briquet. As a experimental results, it was possible to efficiently separate clinker as Fe component and other slag component by specific gravity and magnetic force. As a results of loading and dissolving the manufactured briquet clinker in an electric arc furnace, it was observed that the unit of power and production yield were clearly improved and the carbon addition effect in molten metal was also somewhat.

• 대한토목학회논문집
• /
• 제26권5B호
• /
• pp.439-446
• /
• 2006

본 연구에서는 강수량 및 기온과 같은 수문기상자료의 비선형 동역학적 성분을 추출하기 위해 웨이블렛 변환을 적용하여 대상자료를 재현기간별 성분으로 분리하였다. 변환을 위한 기저함수로는 Daubechies의 9번 ('db9') 웨이블렛 함수를 사용하였다. 또한 웨이블렛 변환의 스케일의 증가에 따른 각 분리단계에서 추출된 상세성분과 근사성분이 비선형 동역학적 특성을 지니는지를 판단하기 위하여 상관차원분석을 이용하였다. 즉 수문기상자료내에 비선형 동역학적 성질을 지니는 성분을 추출하기 위한 방법론으로써 웨이블렛 변환과 상관차원분석의 결합을 제안하였으며, 도출된 결과는 일반적으로 원자료를 이용할 경우에는 파악하기 어려운 대상자료의 시간에 따른 비선형적 변화를 분리 추출하기 위해 본 연구에서 제안한 방법이 적합함을 보이고 있다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제1권2호
• /
• pp.73-81
• /
• 1996

The construction of the health care facilities in terms of medical institutional source cost much and affect on management of another sources like, staffs for the health care delivery systems and the medical service For it is hard to amend and change the physical component of the facilities, the reasonability and the efficiency of the facilities should be the major considering point. Consequently, the purpose of this study is to represent the basic data for determining the size of general hospital by analyzing the use pattern of existing facilities and investigating annual use pattern and user's distance from the facilities.

• 대한약리학회지
• /
• 제9권2호
• /
• pp.9-16
• /
• 1973

It is said that the chinese medicine, Ginseng root has some effects on the central nervous system . Ginseng saponin was prepared from Ginseng methanol extract and its effect on general behavioral activity was studied in rats. Each experimental group was composed of 8 rats. The behavioral activity of rats was observed in terms of 7 components i.e. sleeping, lying, grooming, rearing, walking, eating and drinking. In each group, total duration of behavior-observation was 2 hours, which were devided into four 30 min-intervals. The behavior-observation was done 10 times for each interval, so total number of observation was 40 times throughout 2 hours. Ginseng sapoain showed central nervous system stimulant action in reduced sleeping component and in increased activity components. From the results of this study, it is suggested that Ginseng saponin inhibits the extrapyramidal action of chlorpromazine.