• Journal of the Mineralogical Society of Korea
• /
• v.29 no.4
• /
• pp.167-177
• /
• 2016

Smectitic clays, occurring in Kırka and Bigadiç boron evaporite deposits formed in Miocene playa lake environment in Turkey, contain $LiO_2$ 0.02-0.21% and 0.16-0.30%, respectively, and boron tailings are also reported to contain $LiO_2$ 0.04-0.26%. Lithium in smectitic clays was identified to be retained in hectorite. The XRD results revealed that hectorite was contained in 25.7% and 79.7% of Kırka and Bigadiç deposit samples respectively. In this study, we selected a clay sample from each deposit with lithium content of ~0.18% and estimated extractable lithium by acid treatment and roasting method commercially applicable to lithium resources, such as lepidolite and hectorite. When 1 g of crushed clay (particle size less than $74{\mu}m$) was reacted with 200 mL of 0.25 M HCl solution, the amount of lithium dissolved increased with the increase of reaction time up to 10 hours for both samples. Reaction time longer than 10 hours did not significantly increased the amount of lithium dissolved. After 10 hours of reaction, 89% of lithium in the clay sample from the Kırka deposit was dissolved, while 71% of lithium was dissolved from the Bigadiç deposit tailing sample. 87% of lithium in the clay sample from the Kırka deposit was extracted and 82% of lithium was extracted from the Bigadiç deposit tailing sample by the roasting extraction method, where clays were leached after a thermal treatment at $1,100^{\circ}C$ for 2 hours with $CaCO_3$ and $CaSO_4$.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• The Korean Journal of Pharmacology
• /
• v.32 no.1
• /
• pp.39-49
• /
• 1996

In the present study, we observed change in intracellular $Ca^{2+}$$([Ca^{2+}]_i)$ as measured with the fluorescent $Ca^{2+}-indicator$ fura-2 in association with force development of the rat basilar arteries during activation by$K^+$ depolarizing solution and U46619, a thromboxane analogue, in the absence and the presence of calcitonin-gent related peptide (CGRP). CGRP (30 and 100 nM) caused a concentration-dependent inhibition of U46619-induced contraction with decrease in $[Ca^{2+}]_i$, whereas it did not exert any effect on the $K^+$ (90 mM)-induced contraction and increase in $[Ca^{2+}]_i$, Further, $[Ca^{2+}]_i-force$ relationships were determined by plotting the ratio of $F_{340}/F_{380}$ $([Ca^{2+}]_i)$ as a function of the force induced by U46619, and the results were compared with those obtained in the presence of CGRP. The curves obtained in the presence of CGRP (30 and 100 nM) were significantly moved to downward without right shift of the curves suggesting that CGRP inhibited the U46619-induced contraction only by mediation of reduction in $[Ca^{2+}]_i$ with out any change in the sensitivity of contractile apparatus to $Ca^{2+}$. The CGRP-induced attenuation of $[Ca^{2+}]_i$ and force development was significantly inhibited under pretreatment with CGRP $(8{\sim}37)$ fragment (100 nM), a CGRP1 receptor antagonist. Both the reduced contraction and reduction in $[Ca^{2+}]_i$ caused by CGRP were fully reversed by pretreatment with charybdotoxin (100 nM) and iberiotoxin (100 nM), large conductance $Ca^{2+}-activated$ $K^+$ channel blockers, but not by apamin (300 nM), a small conductance $Ca^{2+}-activated$ $K^+$ channel blocker, and glibenclamide ( 1 ${\mu}M$), an ATP-sensitive $K^+$ channel blocker. In conclusion, it is suggested that the CGRP1 receptor, upon activation by CGRP, are coupled to opening of $Ca^{2+}-activated$ $K^+$ channel and cause to decrease in $[Ca^{2+}]_i$, thereby leading to vasodilation of the rat basilar artery. However, it is not defined that the mechanism underlying vasodilation whether the $K^+$ channel blockers, charybdotoxin and iberiotoxin directly block the CGRP receptors and that CGRP-evoked relaxation is dependent on the cyclic AMP or $K^+$ channel opening or both actions.

• The Korean Journal of Pharmacology
• /
• v.32 no.1
• /
• pp.67-74
• /
• 1996

Cholecystokinin octapeptide (CCK-8), acetylcholine (ACh) and KCl caused a dose dependent contraction in muscle cells enzymatically digested from cat gallbladder. Maximal contraction was obtained at concentration of $10^{-9}M$ for CCK-8, $10^{-5}M$ for ACh and 20mM for KCl. CCK-8 induced contraction was unaffected in calcium free physiological salt solution (PSS) and was completely blocked by strontium substitution for calcium (p<0.001). In contrast, KCl evoked contraction was blocked in calcium free PSS (p<0.01) but was unaffected by strontium replacement of calcium. The contraction elicited by ACh was only slightly reduced in calcium free PSS (p<0.05) and was unaltered by strontium. Muscle cells permeabilized with saponin contracted in response to inositol 1,4.5-trisphosphate $(IP_3)$ and CCK-8. The contraction was blocked by the calmodulin antagonist CGS 9343B (p<0.001), whereas heparin completely blocked the effect of $IP_3$ (p<0.001). The protein kinase C (PKC) antagonist H7 had no effect on either agonist. We conclude that CCK-8 induced gallbladder muscle contraction is mediated by $IP_3$ dependent intracellular calcium release from intracellular stores and a calmodulin dependent pathway; ACh may utilize both extracellular and intracellular calcium. KCl causes muscle contracrion through influx of extracellular calcium and a calmodulin independent machanism.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.3
• /
• pp.151-160
• /
• 2013

A column experiment was carried out to study the reaction of Cr(VI) with organic carbon. Chemical analysis for the effluent collected at different times after the reaction of Cr(VI) with organic carbon in compost and SEM observation for the solid samples remaining after the reaction were conducted. Cr(VI) supplied to the column was not detected in the effluent from column at initial stage, but the concentration of Cr(VI) increased abruptly and maintained the initial supplied concentration (20 mg/kg), indicating that Cr(VI) was effectively removed from the solution at the first state. In general, the concentrations of cations and anions with the exception of $PO_4$ increased and decreased again. Considering that most of these ions were not detected or showed very low concentration, these ions are considered to originate from the organic carbon in the column. SEM observation showed that Cr was coprecipitated with Fe on the surface of organic carbon with small amount of other metals such as Mn, No, and Co. This indicated that on the reduction condition on the organic carbon, Cr(VI) was reduced to $Cr(OH)_3$ and coprecipitated with $Fe(OH)_3$, and that Fe is very important in the precipitation of Cr. After the soluble Fe and Mn are not dissolved any more, $Cr(OH)_3$ is not precipitated. Different from other ions, the concentrations of $PO_4$ decreased and increased, which was thought to be the result of the release of $PO_4$ from organic carbon and sorption on the precipitates. After the maximum sorption on the precipitates and no further release of Fe, the concentration of $PO_4$ returns to its original value measured for the ones released from the organic carbon.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.95-101
• /
• 2007

This study was performed to verify the possibility of MTA and calcium sulfate as a pulp capping agent through comparing the dental pulp response in dogs after capping with MTA, calcium sulfate, and calcium hydroxide. 24 teeth of 2 dogs, 8 month old, were used in this study. Under general anesthesia, cervical cavities were prepared and pulp was exposed with sterilized #2 round bur in a high speed handpiece. MTA calcium hydroxide, and calcium sulfate were applied on the exposed pulp. Then the coronal openin,fs were sealed with IRM and light-cured composite. Two months after treatment, the animals were sacrificed. The extracted teeth were fixed in 10% neutral-buffered formalin solution and were decalcified in formic acid-sodium citrate. They were prepared for histological examination in the usual manner. The sections were stained with haematoxylin and eosin. In MTA group, a hard tissue bridges formation and newly formed odontoblasts layer was observed. There was no sign of pulp inflammatory reaction in pulp tissue. In calcium hydroxide group, there was no odontoblast layer below the dentin bridge. In pulpal tissue, chronic inflammatory reaction with variable intensity and extension occurred in all samples. In calcium sulfate group, newly formed odontoblast layer was observed below the bridge. Mild chronic inflammation with a few neutrophil infiltrations was observed on pulp tissue. These results suggest that MTA is more biocompatible on pulp tissue than calcium hydroxide or calcium sulfate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5159-5168
• /
• 2014

The study examined the relationship among metal health, metabolic syndrome and nutrient acceptance according to gender. Implemented until 2010-2012, the 5th Korean National Health and Nutrition Examination Survey, as an original document, was used for the study. The target was problem drinkers with more than 12 points under AUDIT. Regarding mental health, it was classified into stress, depression and suicidal impulse. Metabolic syndrome was defined when three causes of BMI, waist circumference, FBS, HDL and BP were out of the normal range. The nutrient intake was obtained to confirm the energy intake of nine non-nutrients (Nutrient adequacy ratio: NAR) and the proper intake of the average non-nutrient (Mean adequacy ratio: MAR). These variables were analyzed by frequency, cross analysis and multiple regression analysis through SPSS18.0. In the general features, there was a significant difference according to age, occupation and marital status. In mental health, stress, depression and suicidal impulse were examined. Metabolic syndrome was dependant on FBS, HDL and BP. The nutrient acceptance depended on calcium, vitamin A, thiamine, riboflavin, niacin, vitamin C, and MAR. Logistic regression analysis performed on the variables showed significant differences. Stress, depression, and thoughts of suicide was significantly higher in men aged 19-29 years, and women aged 30-49 years. In the case of the male, those who employed have metabolic syndrome more than those who unemployed. In terms of female, those who were belonged into the middle - low economic level have undergone with metabolic syndrome. In the part of a Mean adequacy ratio(MAR), the male who unmarried, employed, were in the middle low economic levelwere higher. In the case of the female, it was higher for those who were in the middle - low economic level. Overall, an effective way of planning the solution regarding mental health, metabolic syndrome and nutrient intake can be found by considering these features.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Korean Journal of Food Science and Technology
• /
• v.9 no.3
• /
• pp.211-219
• /
• 1977

Dehulled and defatted Korean cottonseed flour was extracted with alkaline solution for 30 minutes and had precipitated the crude portein by adjusting pH $1{\sim}12$. The general composition and the amino acid composition of cottonseed protein were analyzed. Crude protein was purified with sephadex G-100 and G-200, and its component had been identified by disc electrophoresis. Toxic gossypol was removed by n-hexane, acetone and other solvents. The results were as follows. (1) pH 5, pH 7 and pH 4 were the best condition of precipitation of curde protein at single, two step and water extraction, respectively. (2) The cottonseed flour which was dehulled and defatted, contained 61.3% of crude protein. (3) The protein which was isolated from cottonseed flour, contained 20% of glutamic acid, and comparatively high levels of essential amino acids. (4) Dehulled cottonseed flour contained 0.97% of total gossypol and could be romoved 70% of total gossypol by extraction with n-hexane. (5) 10-13 bands of water soluble protein were found in disc electrophoresis, and 10-12 bands in protein were isolated by single and two step procedures. (6) The cottonseed protein could be purified by sephadex G-100 and G-200. (7) 10-20% of gossypol-free cottonseed fluor could be used for animal and human comsumption.

• Korean Journal of Health Education and Promotion
• /
• v.1 no.1
• /
• pp.57-71
• /
• 1983

Sex education is necessary for the youth that they should have an adequate sexual knowledge, attitudes and behaviors in their adolescent period. Four major objectives of this study are as follows; 1. To know the level of sexual knowledge of commercial girl's high school students in Seoul. 2. To know their actual state for the attitudes and behaviors toward sex. 3. To compare the sexual knowledge, attitudes and behaviors of day time school students with those of night time school students. 4. To compare the factors associated with their sexual knowledge, attitudes and behaviors with the individual level. Data were collected on 986 students in Seoul from April 1 to April 10, 1983. As the result of this survey, the following conclusions were obtained. 1. The level of sexual knowledge. (1) The level of knowledge of day time high school students about the physiology of female and pregnancy is shown higher than those of night time students. 64.2% of the respondents are aware of the organ producing ovum. 56.4% the ovulation period. 95.6% the cause of pregnancy. 74.5% the pregnantable period and 12.7% the place of fetilization. (2) Out of 986 respondents. 71.8% knew about contraceptive method correctly, and day time school students knew litter better than night time school students, by showing 73.9% and 69.7% respectively. They knew about contraceptive method with 'oral pills'. 'menstrual cycles', 'condoms'. and 'loops' in the same order. 3) Kinds of veneral disease was correctly known by 37.9%. Day time students knew much better than night time school students. by showing 67.8% and 7.9%. respectively. Transmission method of veneral disease was correctly known by 28.3%. Day time students knew much better than night time students, by showing 51.2% and 5.3%, respectively. (4) The major information source of sexual knowledge was 'book and magazine' (39.9%) and 'friends' (27.4%). 2. Actual state of attitudes and behaviors toward sex. (1) Out of 986 respondents, 84.0% answered that premarital purity should be kept. (2) Out of 986 respondents, 60.8% had an acquaintance of the opposite sex. 45.2% of students with opposite sex reported introduction of their friends as the main channel of making an acquaintance of the opposite sex. (3) Of those who responded to this study 13.8% reported having masturbation, 21.5% kissing, 6.2% petting and 3.7% sex intercourse. (4) 64.8% had sexual problems, which was mensturance (27.2%), aquaintance of the opposite sex (25.4%). The main method to solve the problems were consultation with 'friends' and 'books and magazine' percentage being 39.1% and 30.8%, respectively, whereas very small students discussed with 'teachers' and 'parents' percentages being 0.3% and 5.9%, respectively. (5) Out of 986 respondents, 62.2% had experience in educating about sex, the percentage of day time school was higher than that of night time school. (6) 88.2% of students wanted sex education in school, which were 'general information about sex' (35.4%), 'sexual morality and solution of sexual desire' (18.5%), 'aquaintance of the opposite sex' (13.3%) and 'marriage and role of man and woman' (12.4%) in the same order. They wanted to be instructed about sexes in the lecture of physical education, home economics, biology, military training (59.9%), regular curriculum (17.5%), special lecture (16.9%) and by the counselor or school nurse (5.7%). 3. Analyse concerning the factors about the knowledge, attitudes and behaviors. (1) The better school record was, the higher the level of sexual knowledge. (2) Those who have the religion considered the permarital purity more important than those who have not, the percentage showing 86.7% and 80.7%, respectively. (3) The result of dyad analysis of making acquaintance of the opposite sex in the friendship network showed that a high index of the acquaintance of the opposite sex tends to be a high adoption of making one at the individual level in the group, while the low index tends to be a low adoption of making one in the group.