• 공업화학
• /
• 제29권2호
• /
• pp.138-146
• /
• 2018

광역학치료는 질병을 치료함에 있어 전이가능성과 부작용이 매우 적고 국부적인 종양의 제거가 가능하다는 장점을 갖는 치료방법이다. 광역학치료에서는 빛 에너지를 흡수하여 세포 독성을 띠는 활성산소를 생성하는 감광제가 필수적이다. 하지만 일반적인 감광제는 가시광선을 광원으로 사용하므로 이에 따른 부작용 및 치료효과의 한계가 존재한다. 이러한 이유로 가시광선 대신 근적외선을 광원으로 사용할 수 있는 업컨버전 나노입자가 질병진단 및 치료 분야에서 주목을 받고 있다. 업컨버전 나노입자는 세포 독성 및 광원에 의한 부작용이 적고, 광원의 조직 내 높은 투과율 및 낮은 자가형광 등의 장점을 가지고 있다. 근적외선 업컨버전을 광역학치료에 활용하기 위해서는 근적외선을 흡수하는 업컨버전 나노입자를 활성산소를 생성시키는 감광제와 결합시켜야 한다. 나노입자에 결합된 감광제는 나노입자로부터 빛 에너지를 흡수하고 이를 주위의 산소에 전이시켜 활성산소를 생성한다. 뿐만 아니라 질병의 치료 효율은 업컨버전 나노입자의 표면을 개질하거나 항암 약물의 첨가, 또는 광열치료와의 결합을 통해 더욱 향상시킬 수 있다. 본 총설은 업컨버전 나노입자를 이용한 광역학치료와 이를 이용한 질병 치료 효과 향상에 대한 최근의 연구결과를 바탕으로 서술하였다.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.677-682
• /
• 2015

본 논문에서는 일반적인 광시스템에서 항상 존재하는 잡음 및 외부로부터 더해지는 잡음이 광시스템의 수신기의 성능에 미치는 영향에 대하여 고찰하였다. 광전송시스템에서 광검출기가 1 이하의 양자효율을 갖는 경우를 고려하여 온-오프 키잉 전송시에 수신기의 수신 감도를 계산하였다. m이 50이상인 경우 표준에러확률을 유지하기 위한 광시스템의 수신기 감도가 300이하로 계산되어 m가 적은 경우에 비해서 저출력 시스템을 구성할 수 있음을 확인할 수 있었다. 그러나 이러한 값도 실제 시스템에서는 큰 부담이 되는 값이므로 보다 저출력 광원을 사용하는 경우를 고려하여 수신단에 전치증폭기를 설치한 경우에 대해서도 고려하였는데, 그림 3에서 보이는 바와 같이 보다 적은 출력을 갖는 광원을 사용해도 무방하다는 결과를 얻을 수 있었다.

• 천문학회지
• /
• 제35권1호
• /
• pp.35-40
• /
• 2002

Gaudi, Naber & Sackett pointed out that if an event is caused by a lens system containing more than two planets, all planets will affect the central region of the magnification pattern, and thus the existence of the multiple planets can be inferred by detecting additionally deformed anomalies from intensive monitoring of high magnification microlensing events. Unfortunately, this method has important limitations in identifying the existence of multiple planets and determining their parameters (the mass ratio and the instantaneous projected separation) due to the degeneracy of the resulting light curve anomalies from those induced by a single planet and the complexity of multiple planet lensing models. In this paper, we propose a new channel to search for multiple planets via microlensing. The method is based on the fact that the lensing light curve anomalies induced by multiple planets are well approximated by the superposition of those of the single planet systems where the individual planet-primary pairs act as independent lens systems. Then, if the source trajectory passes both of the outer deviation regions induced by the individual planets, one can unambiguously identify the existence of the multiple planets. We illustrate that the probability of successively detecting light curve anomalies induced by two Jovian-mass planets located in the lensing zone through this channel will be substantial. Since the individual anomalies can be well described by much simpler single planet lensing models, the proposed method has an important advantage of allowing one to accurately determine the parameters of the individual planets.

• 조명전기설비학회논문지
• /
• 제25권6호
• /
• pp.9-17
• /
• 2011

The high-power LED (Light Emitting Diode) which is recently gaining popularity as a digital light source has such advantages as low power consumption, long life, fast switching speed, and high efficiency. Thus, many efforts are being made to use the high-power LEDs for general lighting. This paper proposes LED driving circuit uses a DC/DC converter that can recover energy to compensate for the current variations caused by changes in LED equivalent resistance following a temperature change instead of serial resistance. The maximum input voltage of this DC/DC converter has low voltage variations by temperature change when the rated current is formed. In order to return current to the input side, we need a high boosting at low power. Thus, to improve the low efficiency of power converter, the power converter can be configured in such a way to gather the powers of low-capacity DC/DC converters and return the total power. Experiments showed that the proposed system improved efficiency compared to the conventional LED drive using the existing DC/DC converter.

• International Journal of Advanced Culture Technology
• /
• 제10권4호
• /
• pp.478-486
• /
• 2022

Holography is a human-friendly technology that can express 3D stereoscopic information without eye fatigue. You can experience the mysterious features of light directly and indirectly, and you can also experience the principles of 3D imaging, which makes it a very good curriculum. As such, although holography is very effective in teaching students optics and 3D imaging technology, it has not yet been systematically established. The reason is the cost burden such as expensive equipment and laboratories, and the lack of easily accessible educational equipment. We implemented a portable holographic recording system to solve this problem. In addition, since silver halides, which use harmful chemicals, are not used in the process of developing the recording medium, and photopolymers are used, it is possible to educate not only the general public but also young students. In order to improve the completeness of the recorded result, the mechanism part, light source, and recording medium part of the production system were newly constructed to complement all the existing problems. The proposed system will make holography easily accessible to many people in a variety of fields, not just education. Through the interesting experience of various features and principles of light and the production of holograms with high satisfaction, we hope to popularize them in various fields such as education.

• 한국광학회지
• /
• 제35권3호
• /
• pp.95-106
• /
• 2024

일반 백색 LED의 연색성을 보완하기 위해 적색 양자점을 선택적으로 활용함으로써 고연색성 조명을 구현하는 연구가 최근 활발하다. 본 논문에서는 최근 이루어지고 있는 원격 양자점 부품 연구 및 이를 활용한 고연색성 조명 개발의 현황에 대해 소개한다. 특히 양자점 부품이 배치되는 조명의 광구조 최적화에 있어서 중요하게 고려해야 할 다양한 요소를 집중적으로 논의함으로써 향후 고연색성 조명 연구의 방향 및 전망까지 다루고자 했다.

• 천문학회보
• /
• 제36권2호
• /
• pp.60.2-60.2
• /
• 2011

We introduce the preliminary results of flux monitoring of BL Lac object 0716+714 with the KVN Ulsan 21m radio telescope. This radio source is well known as the intraday variable (IDV) source which is characterized by the rapid flux variation on the time scale of a day or less. In general, the IDV phenomenon is interpreted as the effect of refractive scintillation in the interstellar medium or the evidence of intrinsic flux variation. In previous observations that took a few days, however, it had not been detected the flux variation of short time scale but the monotonic increase and decrease. Therefore, to investigate the longer time scale of 0716+714, we had the flux variation monitoring at 22GHz and 43GHz simultaneously for 9 months from October 2010 to June 2011. We present here the structure functions and the cross correlation functions between different frequencies as well as the light curves.

• 소성∙가공
• /
• 제20권1호
• /
• pp.11-16
• /
• 2011

Recently, according to the rapid development of display, many display applications, such as, cellular phone, navigation, monitor and LCD TV have been changed from CRT type to LCD type. BLU(Back Light Unit) is one of main parts in LCD unit and generally, it consists of a light source, a reflective sheet, a LGP(Light Guide Plate), a diffuser sheet, and two prism sheets. The most important component of BLU is a light guide plate, which diffuses the input light to the TFT-LCD module uniformly. The LGP is usually made by injection molding process, and it has numerous optical micro patterns on the surface. In the present study the micro-patterned stamper which has cylindrical shape was fabricated by using the UV-LiGA process. And the replication characteristics have been compared among three different kinds of injection molding process; general injection molding, injection/compression molding and RHCM(Rapid Heating and Cooling Molding). Average replication ratios of CIM and ICM were 19.1% and 64.6%, respectively. On the other hand, the average replication ratio of RHCM process showed the higher value of 98.4% among these. It show that maintaining the mold surface above $T_g$ could increase the replication ratio of micro patterns substantially.

• 한국광학회지
• /
• 제15권6호
• /
• pp.583-590
• /
• 2004

비전을 이용한 광학식 검사공정이나 그 밖의 광학 현미경을 이용한 측정에 있어서 초점조절은 곧바로 측정 정밀도에 영향을 주는 중요한 요소이다. 본 논문에서는 핀홀 대신 광섬유를 사용하는 공초점 현미경 구조와 하나의 광섬유가 광원과 검출기의 역할을 동시에 수행하는 상반구성(reciprocal scheme)을 적용함으로써 간결하게 시스템을 구성하면서 광축 정렬을 용이하게 하였으며, 압전소자(PZT)를 이용한 광섬유 광원의 광축 방향 변조를 통해 방향 정보가 실린 초점오차 신호를 획득함으로써 빠른 초점조절을 구현하였다. 대물렌즈 변조방식과 달리 광원 변조방식은 현미경 시스템에 미치는 물리적 영향을 줄일 수 있으며, 기존의 장치에 탑재가 비교적 용이하다는 장점을 갖는다. 본 논문에서는 변조 진폭과 시편의 반사도 및 기울기 변화에 따른 초점오차 신호의 변화를 측정하였으며, 거울 시편에 대한 초점조절을 통해 본 시스템의 성능을 평가해 보았다. 또한 종방향 특성곡선의 반치폭 비교실험을 통해 광원 변조는 광축 방향 분해능에 영향을 주지 않음을 확인하였다.

• 태양에너지
• /
• 제17권4호
• /
• pp.35-43
• /
• 1997

An increase in the design of commercial buildings with daylighting is beginning to receive more attention, claimed by some as a second revolution in architecture. The benefits of daylighting may vary significantly because a characteristic of daylight is the way in which it varies. Indirect sunlight, however, received in the interior of a building after reflection, can serve a useful purpose as the main source of illumination. In a cloudy climate it can serve as an occasional welcome addition to the available skylight. Also, site constraints or surrounding urban context may necessitate using reflected light sources, or such sources may be an integral part of the overall design objectives and aesthetics of the proposed projects. When reflected sunlight is introduced into a space, its role in general illumination is what is of interest in this study. Results show that reflected sunlight may help the general illumination in almost same level of significance as daylight from diffuse sky. It is also summarized that the contribution of reflected sunlight to general illumination through the year round may be even and uniform regardless of the season. Consequently, introduction of reflected sunlight should be regarded as one of the successful means to enhance the visual environment in quantitative and qualitative way.