• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권1호
• /
• pp.45-51
• /
• 2014

Thermal shock tests at two stress levels were performed to see the life (cycles) of LPF ASSY (low pass filter assembly) at normal stress level. In this case Coffin-Manson relationship is generally used to describe the relationship between the temperature difference and the life, together with the Weibull distribution describing the life at each stress level. So for given data Coffin-Manson is fitted to predict the life at normal stress level. However, different types of models are appropriate for this type of test. Hence, a more appropriate model such as General log-linear model which can also incorporate the duration at the highest and lowest temperatures and acceleration time will be introduced.

• 한국항공우주학회지
• /
• 제33권10호
• /
• pp.42-50
• /
• 2005

주기적 시변계인 비등방 정지부 및 비대칭 회전부를 갖는 일반 회전체에 대해서, 유도된 해석 모델 및 운동방정식으로부터 시 변조계수를 이용하여 급수방정식을 구성하였다. 이들 운동방정식의 물리적인 변수를 이용한 직접 퓨리에변환의 역행렬로부터 주파수응답함수를 용이하게 유도하였고, 이들의 특성 및 경향을 분석 제시하였다.

• 음성과학
• /
• 제11권3호
• /
• pp.23-36
• /
• 2004

Many languages show reverse durational variation between preceding vowel and following voiced/voiceless (lax/tense) consonants. This study investigated the likely effects of phoneme type (tense vs. lax) on the timing structure (duration of syllable, word, phrase and sentence) of Korean. Three rates of speech (fast, normal, slow) applied to stimuli with the target word /a-Ca/ where /C/ is one of /p, p', $p^h$/. The type (tense/lax) of /C/ caused marked inverse durational variations in the two syllables /a/ and /Ca/ and highly different durational ratios between them. Words with /p', $p^h$/ were significantly longer than that with /p/, which contrasts with many other languages where such pairs of words have a similar duration. The differentials between words remained up to the phrase and sentence level, but in general the higher linguistic units did not statistically differ within each level. Thus, the phrase is suggested as a compensatory unit of phoneme type effects in Korean. Different rates did not affect the general tendency. Distribution of time variations (from normal to fast and slow) to each syllable (/a/ and /Ca/) was also observed.

• Journal of Astronomy and Space Sciences
• /
• 제25권3호
• /
• pp.255-266
• /
• 2008

The current paper presents application of a new analytic solution in general relative motion to spacecraft formation flying in an elliptic orbit. The calculus of variations is used to analytically find optimal trajectories and controls for the given problem. The inverse of the fundamental matrix associated with the dynamic equations is not required for the solution in the current study. It is verified that the optimal thrust vector is a function of the fundamental matrix of the given state equations. The cost function and the state vector during the reconfiguration can be analytically obtained as well. The results predict the form of optimal solutions in advance without having to solve the problem. Numerical simulation shows the brevity and the accuracy of the general analytic solutions developed in the current paper.

• Journal of applied mathematics & informatics
• /
• 제33권1_2호
• /
• pp.13-31
• /
• 2015

In this paper, we introduce a general iterative algorithm for finding a common element of the common fixed point set of an infinite family of ${\lambda}_i$-strict pseudo-contractions and the solution set of a general system of variational inclusions for two inverse strongly accretive operators in q-uniformly smooth Banach spaces. Then, we analyze the strong convergence of the iterative sequence generated by the proposed iterative algorithm under mild conditions.

• Journal of applied mathematics & informatics
• /
• 제14권1_2호
• /
• pp.51-67
• /
• 2004

A matrix pair $(X_0,\;Y_0)$ is called a Hermitian nonnegative-definite(respectively, positive-definite) solution to the matrix equation $GXG^*\;+\;HYH^*\;=\;C$ with unknown X and Y if $X_{0}$ and $Y_{0}$ are Hermitian nonnegative-definite (respectively, positive-definite) and satisfy $GX_0G^*\;+\;HY_0H^*\;=\;C$. Necessary and sufficient conditions for the existence of at least a Hermitian nonnegative-definite (respectively, positive-definite) solution to the matrix equation are investigated. A representation of the general Hermitian nonnegative-definite (respectively positive-definite) solution to the equation is also obtained when it has such solutions. Two presented examples show these advantages of the proposed approach.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.831-836
• /
• 1994

This paper presents rational modeling and analysis method for complex structures with various structural joints. For modeling of structural joint, a general modeling technique is newly proposed by flexibility influence coefficient and inverse of flexibility matrix and static reduction concept which is applied to the retained DOFs(degrees of freedom) of detailed finite element model of struction joints. By this method,joint model with contact surface. which can not be reduced by the general reduction theory such as Guyan reduction theory ,can be reduced effectively. And in this method, the nonlinearity of the contact surface can be linearized within a proper range and the boundary effects of joint region can be excluded. Using the proposed method, screwed joint,glued joint and bolted joint are analyzed. And the effectiveness of the proposed method is verified by experiments.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.912-915
• /
• 2002

It has been known that general velocity and force of a rigid body in space can be described in forms of a twist and a wrench by use of screws. However, the geometrical meaning of acceleration has not been clearly disclosed. It has been a normal practice to analyze or synthesize the acceleration effect of manipulator using some complex mathematical equations, which do not represent any geometrical meanings. In other words, such a technique doesn't clearly provide information about the overall acceleration state of manipulator at that instant. In this study, the geometrical meaning of acceleration of a rigid body has been investigated and thereby a geometrical procedure which can be applied to inverse acceleration analysis of a general non-redundant manipulator is presented as an application.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.112-117
• /
• 2003

The purpose of this work is to general approach to numerically simulating wear in rolling and sliding contact area between wheel and rail interface based on the analysis of dynamics with general MBS package. A simulation scheme is developed that calculates the wear at a detailed level. The estimation of material removal follows Archard's wear equation which states that the reduction of volume is linearly proportional to the sliding distance, the normal applied load and the wear coefficient and inverse proportional to hardness. The main research application is the wheel-rail contact of Korea High Speed Railway.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.325-332
• /
• 1999

As part of the conceptual disign of cable and membrane structures, the adequate shape is decisive with respect to load bearing behaviour and aesthetic expression of the structure. The force densities which are the force-length ratio are very useful parameters for the description of equilibrium state of any general cable-net structures. Because equilibrium states are obtained by solving linear equations the force desity method has a advantage compared with other solution strategies. But if there are futher restrainted conditions in force density the linear method will be extended to nonlinear one. The numeriacl methods are based upon least square and general inverse method for sieving nonlinear eqations. In this paper, the results from two methods is compared through several examples.