• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.153-164
• /
• 2007

Nowaday, in Korea, many u-City projects have been developed as a core business in the new town development project by national or local level of government. However, the new business projects have some problems, such as excessive number of u-services, increased project funds and period, and lower u-services due to lack of u-service evaluation methodologies. Therefore, this paper proposes a new u-service evaluation methodology to solve current problems. The methodology gives an ability to guard general u-service groups for reaching the main goal of the u-City project, and then select alternative u-service groups against being limited by the law and technology in the project year. Besides, as a key variable on performing u-City plans, the complexity between stakeholders is considered in the methodology. Finally, through the Optimal Sequential Method in the methodology, the maximum value of u-service group is obtained as a optimal service group of u-City.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.138-144
• /
• 2016

Titanium is resistant to general corrosion and in sea water because of the passivity layer film on the surface of material, but may be attacked by environments that cause breakdown of the protective oxide layer including hydrochloric, sulfuric and phosphoric acids. In this study, the Ti alloys were solution heat treatment 5hours at $1066^{\circ}C$ and $966^{\circ}C$, and followed by aging heat treated, 1, 4, 8 and 16 hours in $500^{\circ}C$, $600^{\circ}C$ and $650^{\circ}C$ respectively. The heat treated specimens were measured micro Vicker's hardness, and then accomplished electrochemical polarization test for comparing corrosion in 1N sulfuric acid solution. Additionally, micro structures were taken for corrosion tested specimens. The results showed that corrosion resistance was higher in solution heat treated alloy than base and age heat treated metal. Measured corrosion resistants were increased as increasing aging heat treatment time and temperature.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.39 no.1
• /
• pp.63-76
• /
• 2015

This study conducted a survey to gauge the buying and wearing propensities of wearers of leg guards made for baseball catchers, as well as product characteristics of preferred leg guards. Data from the survey were analyzed to obtain basic data for the development of an advanced leg guard design. Degree of compression, horizontal distance, cross section view and outline 3D sketch were also analyzed from the 3D data of leg guards; in addition, mobility and kinematic analysis were conducted through a wearing test. The survey indicated that imported products dominate the current retail market because they are appreciated by customers in terms of fit, price, brand, and protection. Representative complaints of products were discomfort, pressure, and the heavy-weight of the leg guards in general attributed to overall structure and 3D shape. When the pressure was lower on the front area of knee, it feels better to wear and the average knee angular velocity during the up and down motion increased, which suggests a better design from a kinematic point of view. The knee is the primary part of the body responsible for any movement of the lower limbs; consequently, the degree of compression and support stability of the leg guards near the knee area are important factors to evaluate the performance of leg guards. The results of our study indicate significant opportunities for improvement in product design and the development of baseball leg guards along with an ergonomic design that considers the mobility of the knee, skin deformations is necessary to improve performance. The process followed in this study will be applicable to studies on other personal protective equipment for sports.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.3
• /
• pp.545-557
• /
• 2009

Objectives : This study was to investigate the use of mouth-guards and maxillofacial injuries and to examined the relationship among variables in athletes group. Methods : The subjects were 459(86.5%), who were 18 years or older with mean age of 20.7 years. Data was collected using a self administrated questionnaire from May 25 to June 15, 2009. We surveyed maxillofacial injuries(temporo-mandibular disorders contained) and mouth-guards usage and confidence concerning mouth-guards in athletes. The data were analysed with chi-square analysis, fisher's exact test and logistic regression using the SPSS 15.0 windows. Results : Prevalence of body or maxillofacial injuries experiences was 54.5% for athletes and 47.1% for non-athletes groups(p>0.05). The other hand, the incidence temporo-mandibular disorders was 67.0% for athletes and 49.8% for non-athletes groups(p<0.05). The experience of the use of mouth-guards was 83.3% for athletes and 78.8% for non-athletes, there were not significant differences between athletes and non-athletes groups (p>0.05). Risk factors found to be significantly related to the occurrence of maxillofacial injury were: unused mouth-guards(OR=2.83), no rules for use of mouth-guards(OR=2.46). Conclusions : Based on the findings, maxillofacial injuries experience is highly associated with mouth-guards usage, not only athletes also general people should be educated on the use of mouth-guard in order to reduce the incidence of maxillofacial injuries.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.333-336
• /
• 2017

A speaker diaphragm generates a divided vibration. The influence of the break-up mode is sufficient to cause a shape change in the diaphragm. In this paper, is widely used in ultra-thin multi-media devices, including smart phones is the advance guard of the IT sector, the micro-speakers and its target. Micro-speakers are different from general speakers. The plate has structural form and space constraints. In particular, they utilize a closed-type drive space. It is difficult to provide cooling for the auxiliary suspension structure because of the heat generated in the moving coil. The present study considered the relationship between the break-up mode and the heat transfer of the diaphragm. An experiment was conducted in two stages to compare the embodiment of the break-up mode and heat transfer in a certain frequency range. The changes in the heat were determined through measurements and thermal imaging of the break-up mode. The break-up mode tendency of the diaphragm could be rapidly predicted based on the imaging results using the thermal imaging camera. This will help in the optimal design of micro-speakers.

• FOCUS: LIFE SCIENCE
• /
• no.4
• /
• pp.1.1-1.4
• /
• 2024

This article provides comprehensive guidance on the maintenance, cleaning, regeneration, and storage of silica-based HPLC (High-Performance Liquid Chromatography) columns. The general considerations emphasize the importance of using in-line filters and guard cartridges to protect columns from blockage and irreversible sample adsorption. While these measures help, contamination by strongly adsorbed sample components can still occur over time, leading to an increase in back pressure, loss of efficiency, and other issues. To maximize column lifetime, especially with UHPLC (Ultra-High Performance Liquid Chromatography) columns, it is advisable to use ultra-pure solvents, freshly prepared aqueous mobile phases, and to filter all samples, standards, and mobile phases. Additionally, an in-line filter system and sample clean-up on dirty samples are recommended. However, in cases of irreversible compound adsorption or column voiding, regeneration may not be possible. The document also provides specific recommendations for column cleaning procedures, including the flushing procedures for various types of columns such as reversed phase, unbonded silica, bonded normal phase, anion exchange, cation exchange, and size exclusion columns for proteins. The flushing procedures involve using specific solvents in a series to clean and regenerate the columns. It is emphasized that the flow rate during flushing should not exceed the specified limit for the particular column, and the last solvent used should be compatible with the mobile phase. Furthermore, the article outlines the storage conditions for silica based HPLC columns, highlighting the impact of storage conditions on the column's lifetime. It is recommended to flush all buffers, salts, and ion-pairing reagents from the column before storage. The storage solvent should ideally match the one used in the initial column test chromatogram provided by the manufacturer, and column end plugs should be fitted to prevent solvent evaporation and drying out of the packing bed.

• Korean Security Journal
• /
• no.41
• /
• pp.37-66
• /
• 2014

In recent years, with the development of computers and electronics, electronics and communication technology in a growing and each part is dependent on the cross-referencing makes all electronic equipment is obsolete due to direct or indirect damage EMP. Korea and the impending standoff North Korea has a considerable level of technologies related to the EMP, EMP weapons you already have or in a few years, the development of EMP weapons will complete. North Korea launched a long-range missile and conducted a nuclear test on several occasions immediately after, when I saw the high-altitude nuclear blackmail has been strengthening the outright offensive nuclear EMP attacks at any time and practical significance for the EMP will need offensive skills would improve. At this point you can predict the damage situation of Korea's security reality that satisfy the need, more than anything else to build a protective system of the EMP. The scale of the damage that unforeseen but significant military damage and socio-economic damage and fatalities when I looked into the situation which started out as a satellite communications systems and equipment to attack military and security systems and transportation, finance, national emergency system, such as the damage elsewhere. In General, there is no direct casualties reported, but EMP medical devices that rely on lethal damage to people who can show up. In addition, the State power system failure due to a power supply interruption would not have thought the damage would bring State highly dependent on domestic power generation of nuclear plants is a serious nuclear power plant accident in the event of a blackout phenomenon can lead to the plant's internal problems should see a forecast. First of all, a special expert Committee of the EMP, the demand for protective facilities and equipment and conduct an investigation, he takes fits into your budget is under strict criteria by configuring the contractors should be sifting through. He then created the Agency for verification of performance EMP protection after you have verified the performance of maintenance, maintenance, safety and security management, design and construction company organized and systematic process Guard facilities or secret communications equipment and perfect for the EMP, such as protective equipment maneuver system should take.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.78-97
• /
• 2021

Seojangdaeyajodo is a drawing of military night training on February 12th (lunar leap month), 1795. Focusing on the Seojangdaeyajodo, the characteristics and of the costumes worn by various types of officials were examined. There were 34 officials located near King Jeongjo in and around Seojangdae, with 27 Dangsanggwan and 7 Danghagwan. They wore three types of costumes, including armor, yungbok, and military uniforms. All of the twelve armor wearers and the five officials wearing yungbok were dangsanggwan, and the military uniform wearers included eleven dangsanggwan and six danghagwan. For the shape of the armor, the armor relics of General Yeoban, suitable for riding horses, and the armor painting of Muyedobotongji were referenced, and the composition of the armor was based on practicality. The armor consists of a helmet, a suit of armor, a neck guard, armpit guards, arm guards, and a crotch guard. The color of the armor was red and green, which are the most frequently used colors in Seojangdaeyajodo. The composition of yungbok was jurip, navy cheollik, red gwangdahoe, socks made of leather, and suhwaja. The composition of the military uniform was a lined jeolrip, dongdari, jeonbok, yodae, jeondae, and suhwaja. There were differences in the fabrics used in dangsanggwan and danghagwan military uniforms. Dangsanggwan used fabric with depictions of clouds and jewels, and danghagwan used unpatterned fabric. Moreover, jade, gold, and silver were used for detailed ornamental materials in dangsanggwan. The weapons included bows and a bow case, a sword, a rattan stick, wrist straps, and a ggakji. In the records of the King Jeongjo period, various colored heopsu were mentioned; the colors of the dongdari and jeonbok of dangsanggwan and danghagwan were referenced in various colors. It was presented as an illustration of costumes that could be used to produce objects accurately reflecting the above historical results. The basic principle of the illustration was to present the modeling standards for 3D content production. Samples of form, color, and material of the corresponding times and statuses were presented. The front, the side, and the back of each costume and its accessories were presented, and the colors were presented in RGB and CMYK.

• (The)Study of the Eastern Classic
• /
• no.37
• /
• pp.127-159
• /
• 2009

This paper is about the conception of "Hwangjoin(皇朝人)" during the reign of King Youngjo in the Joseon Dynasity. Originally, Hwangjoin meant the Chinese people till the mid-term of the Joseon Dynasty but the meaning was changed to the immigrants from the Ming(明) dynasty in reign of King Youngjo. They were Han Chinese(漢族) and moved to the Joseon between the Japanese Invasion in 1592 and the Manchu war in 1636. The Joseon government gave a warm welcome to them. Two wars made the Joseon government pay attention to the national restoration and served the entrance of 'Sallim(山林)' on the central government as a momentum. Song, Siyeol(宋時烈) was the leader of Sallim, who made an issue of 'Daecheong-boksu Discourse(對淸復讐論;to revenge on Ching(淸) Dynasty)' like a way of 'Bukbeol(北伐;to attack Ching Dynasty)'. His plan came to fail because of the death of King Hyojong and was replaced with Jonju Discourse(尊周論;respect for Zhou Dynasty). Daebodan(大報壇) was built in the reign of King Sukjong, which meant Joseon got the justness that they inherited from the Ming Dynasty. Later Daebodan expanded and it led to works in honor of loyal subjects and patriots, victims of two wars and a policy of a warm reception for Hwangjoin. King Youngjo did his best to theorize Daemyeong Euiri Discourse(對明義理論) and Jonju Discourse for himself. His efforts came out as a spread of conception on Pungcheon(風泉;fengquan), publication and education of Eoje-seo (御製書) and making literary works(英祖御製). King Youngjo employed many policies for Hwangjoin. First, operation of Chungnyanggwa(忠良科) opened a door for them to go into politics. Second, descendants of Hwangjoin had charge of Hwangdan's guard(皇壇 守直) posts. and joined in the sacrificial rites of Ming Emperors. Third, they could have government jobs and honorary posts for ancestors' merits. Fourth, a list of Hwangjoin, "Hwainlok(華人錄)" was published and they got preferential treatment unlike Hyanhwain(向化人). King Young's Pungcheon(風泉) had an effect on literature such as Lee, Gyusang(李奎象)'s "Beong-sejaeunlok(幷世才彦錄)" and Song, Gyubin(宋奎斌)'s Pungcheon-yuhyang(風泉遺響)". The general people of Joseon were jealous and envious of them because of special treatment polices for Hwangjoin. So people wanted to be included in Hwangjoin as far as possible and there were cases of pretending to be a Hwangjoin. The conception of "Hwangjoin(皇朝人)" during the reign of King Youngjo was realized as the policy for Hwangjoin based on Daemyeong Euiri Discourse (對明義理論) and Jonju Discourse(尊周論). It was a way of becoming clear about Joseon's position in political principle.

• The Korean Journal of Quaternary Research
• /
• v.18 no.2 s.23
• /
• pp.65-66
• /
• 2004

There have been groves, in many cases, along with hedgerows and remnant forests around a traditional Korean village. A village grove is very closely connected to the life of residents. Sometimes it was a holy place where important village festivals were held, and became a resting place for farmers, especially in sunny summer. As a matter of fact, it is noted that traditional Korean village groves had been fostered for many purpose as religion, Confucianism, scenery, sanitation, traffic guard, public security, agriculture, hunting, and military and public uses were included in Chosun Govemor General(1938). Village groves were usually located at the outlet of watershed inside which a village was built. In addition, village groves used to be established along part of mountain ranges, streams and streets. A unique type of village grove, called bibosoop was fostered especially where the outlet of watershed was largely opened. In other cases, it was placed where a part of mountain range was relatively low, or where village residents were likely to see ugly objects such as a huge cliff, stony upland with an unvegetated area and the like(Kim and Jang 1994). In a sense, a sheltebelt is a sort of bibosoop as it is a landscape element to complement places that are exposed to strong winds. However, it is comparable to other typical bibosoop that is situated at a topographically very specific zone of watershed. In this paper, we will address potential functions of Korean village groves from a perspective of modern landscape ecology and show current status of some remnants, based on preliminary surveys. A village grove functions as barrier or filter of objects such as water, nutrients, and other elements and habitat of wildlife (park et al. 2003, Lee 2004). The village grove slows down the flow of water and air, maintains soil moisture an hinders soil erosion, enabling cultivation of crops and bringing up creatures nearby. It contributes to enhancing biodiversity. Birds rest on shrubby and woody trees of the element. Presumably, other organisms may also inhabit the village groves and take advantage of it when those move from a forest patch to others. Emerging insects acclimate themselves in the shade of the green space before they fly to sunny air. Besides the village grove acts as a component of agroforestry system as leaf litter is shed from a grove to an asjacent agricultural area, and transformed into green manure(Lee 2004). By the way, many of the landscape elements were destroyed or declined in Koea during the past several decades. The losses have been parallel or linked to environmental degradation. Unfortunately, we have a little reliable data as for how many groves have disappeared in Korea until now. There has been no complete census on the village groves in Korea, and the viewpoints of survey were to a degree different depending on surveyors. So, it is difficult to analyze the temporal and spatial change of village groves. Currently, national inventory data of Korean village groves are available in three reports. We reviewed the locations of village groves and arranged those according to the present administrative units, DONG. With the limited data, we found that at least 484 of village groves were recorded in South Korea. Among all provinces, village groves were most in Gyeongsanbuk-Do Province and least in Chungcheongbuk-Do Province(Table 1). This is a preliminary report prepared while some quantitative data regarding functions and lossers of the village groves are being collected. More detailed data will be introduced in the near future.