• Korean Journal of Food Science and Technology
• /
• v.17 no.5
• /
• pp.319-325
• /
• 1985

Agar was prepared from domestic agarophyte (Gelidium amansii) by a process of acid extraction. Optimal conditions in the acid treatment of the seaweed and the gelling properties of the agar thus prepared were investigated. The yield and gel strength of the control (the agar extracted with distilled water) showed 13,3% and 306g/$cm^2$, respectively. The yield of 38.7% was obtained when agar was extracted with 0.007N Hydorchloric acid while the gel strength of agar,511g/$cm^2$ was observed with the agar extracted with 0.005N Hydorchloric acid solution. The agar extracted with hydrochloric acid solution showed excellent properties of agar at the acid concentration range 0.005N-0.01N The cooking time of 60 min. was found to be effective to the yield and also to the gelling property of the agar and the cooking longer than 60 min. was proved to be destructive to agar. In general, yield and gelling properties of the agar obtained showed a close relation to the acid concentration and cooking time, but no consistent influence on the contents of ash and sulfur trioxide.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.483-486
• /
• 1995

With a view to increase utility of ethanol fractionated fish skin gelatin as a food source, the effect of gelation condition on physical properties of the gelatin was investigated. The physical properties of gelatins treated with or without ethanol were improved with a concentration of gelatin increased. The properties such as gel strength, melting point and gelling point of 10% gelatin sol or gel were reached to maximum at pH 6.0 in ethanol treated gelatin and pH 5.0 in non treated one, respectively. Gel strength and melting point of both gelatin gels chilled for long time at low temperature were superior to those of both gelatin gels chilled for short time at high temperature. Gel strength, melting point and gelling point of ethanol treated gelatin gel or sol prepared under optimized gelation conditioning were superior to those of non treated one.

• Journal of the Korean Ceramic Society
• /
• v.30 no.10
• /
• pp.838-844
• /
• 1993

To control the pore size of silcia gel, formamide (FA), N,N-dimethyl formamide (DMF), polyethylene glycol (PEG) and polyacrylic acid (PAA) were added in the sol-gel process from starting solution with tetramethyl orthosilicate (TMOS). The gels were characterized using porosimeter, TG-DTA and SEM. As a result, the more contents of FA and PAA was increased the more gelation time was decreased, also the more contents of DMF and PEG was increased the more gelling time was increased. The mean pore size of gels was larger in the order of PAA, DMF, FA and PEG. And the mean pore size of porous silica glass was 59.0$\AA$, 31.5$\AA$, 29.9$\AA$ and 29.0$\AA$, respectively, heated at 75$0^{\circ}C$/100$0^{\circ}C$.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.66-69
• /
• 2001

A subsurface containment system which is constructed by pumping a gelling liquid (Colloidal Silica) into the unsaturated medium is investigated by developing a mathematical model and conducting numerical simulations. The proposed model is verified by comparing experimentally and numerically determined hydraulic conductivities of gel-treated soil columns at different Colloidal Silica (CS) injection volumes. The numerical experiments indicate that an impermeable gel layer is formed within the time period twice the gel-point. At the Same normalized time, the CS solutions with lower NaCl concentrations result ill further migration and poor Performance in plugging the pore space.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.1
• /
• pp.31-42
• /
• 2020

Horse fat is known to be an effective ingredient in Asia, and the horse fat itself, which is mixed with other ingredients at the additive level, is often sold as a finished product. In this case, physical properties of the horse fat raw material are important. Many horse fats produced in Korea (Jeju) have low temperature stability, so if not stored at low temperatures, segregation may occur. In the case of Japanese horse fat, it is partially hydrogenated or is used the solid phase as the horse fat by separating the liquid phase and the solid phase that is harder and more stable than the horse fat of Jeju. In this study, the physical properties were tested to improve the temperature stability even without the partial hydrogenation process of Jeju horse fat. Various oil gelling agents were used in the study. Results confirmed that the physical properties of the hydroxystearic acid added Jeju horse fat were improved. In addition, stability evaluations at temperatures of 25 ℃, 40 ℃, 45 ℃ and flow behavior evaluations at temperatures of 25 ℃, 30 ℃, 40 ℃ were performed for Jeju horse fat with hydroxystearic acid, 100% Jeju horse fat, and 100% Japanese horse fat. Results showed that the Jeju horse fat improved in flow behavior by adding hydroxystearic acid similar to that of Japanese horse fat. In addition, when the crystal state was observed under a microscope, the thermal stability was improved by decreasing the size of the needle-type crystals with the addition of hydroxystearic acid. Jeju horse fat containing hydroxystearic acid was found to have no physical problems even when stored at room temperature for a long time.

• Korean journal of food and cookery science
• /
• v.19 no.4
• /
• pp.511-520
• /
• 2003

This study was carried out to determine the effects of various contents of kiwifruit contents on the quality characteristics of mixed polysaccharide gels made from $\kappa$-carrageenan and locust bean gum. The color value, gelling temperature, melting temperature, break down rate, syneresis, rupture properties, TPA properties and sensory properties of mixed polysaccharide gels with various contents of kiwifruit contents were measured. As the kiwifruit contents was increased, the lightness (L), yellowness (b) and greenness (-a) of the mixed polysaccharide gels increased. There were no differences in the color values of gels during storage. As the kiwifruit content was increased, the gelling and melting temperatures of the mixed polysaccharide gels also increased. The mixed polysaccharide gels with high kiwifruit contents were difficult to melt, and it seemed that the addition of kiwifruit to the mixed polysaccharide gels could improve the thennal stability of the gels. The syneresis of the gel increased with increasing storage time, whereas the addition of kiwifruit to the gel resulted in suppression of syneresis. With regard to the rupture properties, stress, energy and strain, they were all decreased with increasing kiwifruit contents. The TPA properties, adhesiveness, hardness and chewiness increased and cohesiveness decreased with increasing kiwifruit contents. The results showed that the gel became tough and adhesive, and could be easily broken under small deformation, with increasing kiwifruit contents. The sensory evaluation showed that the green color, aroma, sweetness and sourness increased with increasing kiwifruit contents. The texture, adhesiveness, springiness and cohesiveness decreased, and brittleness and hardness increased, with increasing kiwifruit contents. The overall acceptability of the gel with 30% kiwifruit content was the highest. Thus, mixed polysaccharide gels made from kiwifruits could be useful, as the addition of kiwifruit to a mixed polysaccharide gel results in a good aroma, taste and stability, despite a lowering of the textural properties.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.4
• /
• pp.407-414
• /
• 2009

Water-in-Oil (W/O) emulsions are widely used in cosmetics. However, O/W (Oil-in-Water) emulsions are generally superior to W/O emulsions in terms of stability. In this study, we investigated the changes of viscosity, the size of emulsion droplets, and rheological properties of emulsions prepared using distearyldimonium chloride (DDC), magnesium aluminum silicate (MAS) and quaternium-18 hectorite (QH). In addition to the changes of the composition, we tested the condition of homogenization including rotation per minute of the mixer and the mixing time. The viscosity of emulsions with DDC and AMS were not changed with time and the stability of emulsions was stable during the storage time. However, the fluidity of emulsions were low due to the forming gel network in the emulsions. The gelling power of the emulsions with QH was rather weaker than that of the emulsions with DDC and MAS. The viscosity of emulsions with QH was gradually reduced and the phase separation of emulsions with high concentration of oil was observed throughout the storage time, however, the stability of emulsions with DDC, MAS and QH was excellent, the fluidity of emulsions was enhanced, and the viscosity of emulsions was sustained for a long time after setting of emulsions.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.4
• /
• pp.292-297
• /
• 1989

To achieve fiber/resin reinforced composites with high quality (void-free, uniform compaction), a basic understanding of the principal factors related to a thermal cycle to cure the matrix and a pressure to compact the system is necessary. In this paper, some dielectric and mechanical properties of glass cloth reinforced epoxy composites are measured as a function of fabrication conditions, where the time that the pressure is applied to the sample during the cure process is controlled. Both the tensile strength and frequency characteristics of the sample are improved significantly when the pressure is applied at the start point of gelling.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.6
• /
• pp.845-854
• /
• 2016

Characteristics and properties of gelatin from goat skin pretreated with NaOH solutions (0.50 and 0.75 M) for various times (1 to 4 days) were investigated. All gelatins contained ${\alpha}$-chains as the predominant component, followed by ${\beta}$-chain. Gelling and melting temperatures of those gelatins were $23.02^{\circ}C$ to $24.16^{\circ}C$ and $33.07^{\circ}C$ to $34.51^{\circ}C$, respectively. Gel strength of gelatins increased as NaOH concentration and pretreatment time increased (p<0.05). Pretreatment for a longer time yielded gelatin with a decrease in $L^*$-value but an increase in $b^*$-value. Pretreatment of goat skin using 0.75 M NaOH for 2 days rendered the highest yield (15.95%, wet weight basis) as well as high gel strength (222.42 g), which was higher than bovine gelatin (199.15 g). Gelatin obtained had the imino acid content of 226 residues/1,000 residues and the gelatin gel had a fine and ordered structure. Therefore, goat skin gelatin could be used as a potential replacer of commercial gelatin.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.386-390
• /
• 2006

Colloidal silica which has high surface area and excellent surface properties are chemically stable inorganic materials and used for various applications in industry. Silica sol was prepared from sodium silicate solution by acid neutralization method and ion exchange treatment to remove sodium ions. Through the experimental analysis for controlling factors of particle growth rate, such as temperature, pH, and aging time, the uniform size distribution of silica sol could be obtained. The size distribution and shape of silica sol was measured by TEM and dynamic light scattering method. Zeta potential change and gelling phenomena of silica sol and its rheological properties also investigated.