• 제목/요약/키워드: Gelling time

검색결과 46건 처리시간 0.025초

지반주입에 의한 대수층에서의 차수효과 및 내구성 (Cut-off Effect and Durability in Aquifer by Chemical Grouting)

  • 송치용;남순성;천병식
    • 대한토목학회논문집
    • /
    • 제11권4호
    • /
    • pp.189-200
    • /
    • 1991
  • 대수층에서 약액주입에 의한 차수효과를 검토하고자 동수조건을 변화시킬 수 있는 1.5 shot system의 특별주입장치에 의해 유속변화에 따른 시료토의 고결상태를 확인 조사하고, 약액의 내구성을 파악하기 위해 변수위투수시험에 의해 시간의 경과에 따른 투수계수변화를 측정하였다. 동수지반에서 차수효과(내구성)를 증대시키기 위해서는 약액의 지하수에 희석, 유실되지 않도록 유속에 반하여 gel-time을 짧게 하는 한편, 약액의 농도, 주입량(주입률) 및 주입속도를 높혀 주며, 반응율이 큰 경화제를 사용한다든지 약액 중의 수분을 작게 되도록 배합하는 등의 조치가 유효하며 직접적인 방안으로는 주입공의 간격을 좁히거나 주입열수를 늘리는 등의 대책이 필요하며 더욱 이들 제 계수는 실내주입시험 및 현장시험주입 등에 의한 자료를 바탕으로 결정함이 바람직하다.

  • PDF

Processing Optimization of Gelatin from Rockfish Skin Based on Yield

  • Kim, Hyung-Jun;Yoon, Min-Seok;Park, Kwon-Hyun;Shin, Joon-Ho;Heu, Min-Soo;Kim, Jin-Soo
    • Fisheries and Aquatic Sciences
    • /
    • 제13권1호
    • /
    • pp.1-11
    • /
    • 2010
  • The study was performed to optimize the processing conditions (alkali concentration, extraction time, and temperature) for rockfish skin gelatin based on yield using response surface methodology and comparison of the physicochemical properties with those of rockfish skin gelatin pretreated and extracted under ordinary conditions (alkali treatment concentration: 1.0 M; extraction time: 2 hr; extraction temperature: $60^{\circ}C$). Predicted maximum gelatin yield of 19.1% and gelatin content of 87.8% were obtained by extraction at $106.6^{\circ}C$ for 69.0 min after pretreatment with 1.1 M calcium hydroxide. Yield of gelatin extracted under high temperature/high pressure (G-HT/HP) was 54% higher than that extracted under ordinary temperature/time (G-OT/T). However, G-HT/HP was inferior in gel strength and gelling point to (G-OT/T), but comparable in transmission. Based on the physicochemical properties, G-HT/HP was unsuitable for use in products requiring higher physical properties, but could be useful for health-functional foods.

산수유 퓨레로 제조한 젤리의 품질 특성 (Quality Characteristics of Jelly Using Fresh Puree of Sansuyu (Corni Fructus))

  • 정지숙;박수진;손병길
    • 한국식품영양과학회지
    • /
    • 제46권1호
    • /
    • pp.83-91
    • /
    • 2017
  • 본 연구는 산수유 퓨레를 첨가하여 젤리를 제조하였으며, 젤화제 종류 및 함량, 가열시간에 따른 젤리의 이화학적 품질 특성을 조사하였다. 산수유 퓨레는 수분 함량 89.39%, pH 2.92, 당도 $10.28^{\circ}Brix$, 총폴리페놀 함량 1,791.71 mg GAE/100 g이었다. 산수유 퓨레 첨가량이 증가할수록 pH는 3.04~2.97로 소폭 감소하였으나 부착성은 큰 폭으로 감소하였다. 또한, 가열시간이 증가할수록 붉은색이 불안정하여 황색으로 변하였으며, 5분 이상 가열 시에는 젤리가 되지 않았다. 산수유 젤리의 pH는 3.04~2.97, 당도는 $64.31{\sim}66.96^{\circ}Brix$ 범위였다. 산수유 퓨레 10%, 한천 1.5%, 카라기난 1.0% 첨가한 젤리의 기호도가 5.15로 가장 높게 평가 되었다. 산수유 과육을 이용함으로써 과육에 포함된 다양한 생리활성 물질을 효과적으로 섭취할 수 있는 젤리 제조가 가능할 것으로 본다.

돼지 반막양근을 이용한 수리미 유사물질의 겔 특성에 미치는 가열시간과 온도의 영향 (The Effects of Cooking Temperature and Time on Gel Propertof Surimi-like Material from Porcine semimembranosus Musclye)

  • 한철용
    • 한국조리학회지
    • /
    • 제15권4호
    • /
    • pp.99-114
    • /
    • 2009
  • 본 연구는 돼지 반막양근(semimembranosus muscle, SM)으로부터 획득된 수리미 유사물의 최적의 가열조건을 모색하고자 겔 특성에 미치는 다양한 가열온도와 가열시간의 효과를 조사하였다. 가장 현저한 변화는 수세과정에서 SM으로부터 SLM 처리하는 과정중 지방함량(약 1%)의 감소가 발생하였다. 겔의 강도와 인장강도는 가열온도 $75^{\circ}C$에서 20분간 가열했을 때 현저히 증가하였다(p<0.05). SLMG의 겔 특성은 SDS-PAGE의 결과로 살펴보면 가열시간과 온도에 의해 영향을 받은 것으로 나타났다. 가열 20분 후 phosphorylase를 포함한 몇몇의 효소들이 밴드가 사라지기 시작했는데, 46 kDa과 60kDa의 밴드의 소멸은 20분 가열시간 후 관찰되었다. 현미경 사진을 통해 관찰한 결과 가열 15분까지는 섬유 또는 필라멘트들 사이 공간이 밀접하게 나타났으며, 근섬유의 필라멘트들이 사라지지 않고 존재하는 것으로 나타났다. 가열시간 30분에서35분사이에 근섬유와 필라멘트 사이 현저한 변화가 발생하였으며, 가열시간이 증가할수록 SLM의 구조적으로 서로 엉겨 붙는 것이 관찰되었다. 이러한 결과는 가열온도 $75^{\circ}C$와 가열시간 25분에서 가장 우수한 젤을 형성하는 것으로 나타났다.

  • PDF

조리 방법과 재료 배합비에 따른 Bechamel Sauce의 특성 (Sensory Properties and Viscosity of Bechamel Sauce by Cooking Methods and Ratio of Raw Materials)

  • 오찬
    • 한국식품영양학회지
    • /
    • 제13권4호
    • /
    • pp.307-311
    • /
    • 2000
  • Bechamel sauce의 배합비율과 방법을 달리하여 소스를 만들었을 때의 최적 조건은 다음과 같다. 1. 우유의 양과 조리 방법을 달리한 Bachamel Sauce의 점도와 퍼짐성은 각각의 시료간에 유의적인 차이를 나타내었으며(P<0.001), 점도는 우유에 첨가되는 루의 양이 적음에 따라 증가하며, 반대로 퍼짐성은 감소함을 알 수 있었다. 2. 양파 첨가 방법을 달리한 Bechamel sauce의 점도와 퍼짐성은 각각의 시료간에 서로 유의적인 차이를 나타내지 않았다(P<0.05). 3. 우유의 양과 조리 방법을 달리한 Bechamel sauce의 관능적 평가는 각각의 시료간에 유의적인 차이를 나타내었다(P<0.001). 색, 부드럽기, 전체적인 맛 등에서 높은 기호도를 나타낸 것은 버터와 밀가루 그리고 우유가 1 : 1 : 17인 것이었다. 4. 양파 첨가 방법을 달리한 Bechamel sauce의 관능적 평가에서는 점도, 부드럽기, 풍미, 전체적인 맛에서 각각의 시료간에 유의적인 차이를 나타내었으며(P<0.001), 버터에 양파를 볶아서 만드는 방법이 가장 기호도가 높았다.

  • PDF

수소첨가 레시친을 사용한 Lipid-LCG의 생성 (Formation of Lipid-LCG with Hydrogenated Lecithin)

  • 김인영;이건봉;조춘구;강삼우
    • 한국응용과학기술학회지
    • /
    • 제19권1호
    • /
    • pp.10-18
    • /
    • 2002
  • In this study, it should be mentioned that Lipid-LCG can be prepared with the main compound of hydrogenated lecithin in oil-in water emulsion. The results of its physical property and stability are as follows. First, the best suitable compositions of Lipid-LCG are made from 4.0wt% of the hydrogenated lecithin, 4.0wt% of cetostearyl alcohol as emulsifier and gelling agent, 3.0wt% of butylene glycol and 2.0wt% glycerin as moisturizers, 3.0wt% of cyclomethicone, 3.0wt% of isononyl-isononanoate, 3.0wt% of capric/caprylic triglycerides, 3.0wt% of macadamia oil as emollients. Second, As the optimum conditions to form Lipid-LCG, which figured out 6.0 ${\pm}$ 1.0 for pH level, 32kg/mm, min for hardness to make a .essence to be formed the ternary phase of liquid crystal(multi-lamellar type). Third, as the analytical result of this system, it obtained that particle size is $1{\sim}8{\mu}m$ level, and is certified with it at 400 and 1,000 magnifications by microscope. The stability of Lipid-LCG is very stable on condition of a low temperature ($4^{\circ}C$), a room temperature ($25^{\circ}C$) and a high temperature ($40^{\circ}C$), which is not to be split in for a long time(for 3-month). We produced our own moisturizing essence, which has a good affinity to skin by means of this system.

에탄올처리 찰가자미류껍질 젤라틴의 물리적 특성에 대한 겔화조건의 영향 (Effect of gelation condition on physical properties of dover sole skin gelatin prepared by fractional precipitation with ethanol)

  • 조순영;하진환;이정석;이응호;김진수
    • Applied Biological Chemistry
    • /
    • 제38권2호
    • /
    • pp.147-150
    • /
    • 1995
  • 에탄올처리 찰가자미껍질 젤라틴의 젤라틴농도, pH, 정치온도 및 시간과 같은 겔화조건에 대한 물리적 특성 및 색조의 변화를 측정하였다. 젤라틴의 농도가 증가할수록 겔강도, 녹는점과 같은 물리적 특성은 증가하였고, 일정농도에서의 이러한 값들은 에탄올처리한 젤라틴이 무처리한 젤라틴에 비하여 컸다. 젤라틴 졸의 pH가 에탄올처리한 젤라틴의 경우 6.0일 때, 무처리한 젤라틴의 경우 5.0일 때, 겔강도, 졸화온도 및 겔화온도가 가장 높았고, 이를 벗어난 $pH\;5.0{\sim}7.0$의 범위에서는 서서히 감소하였으며, pH 5.0이하 및 pH 9.0이상에서는 급격히 감소하였다. 젤라틴 졸을 겔화시키기 위하여 정치시키는 온도의 경우 낮을수록, 정치시키는 시간의 경우 길어질수록 겔강도 및 졸화온도는 높았다. 겔화조건을 동일하게 하였을 때 에탄올처리한 젤라틴이 무처리한 젤라틴보다 물리적 특성값이 높게 나타났다.

  • PDF

우즈베키스탄 거주 고려인의 주생호라에 관한 연구 (A Study on the dwellings of the Korean Diaspora of Uzbekistan)

  • 이영심;이상해
    • 대한가정학회지
    • /
    • 제42권9호
    • /
    • pp.1-18
    • /
    • 2004
  • Most of the Korean diaspora who lived in Yunhaeju moved to Central Asia in 1937 following the policy of deportation of Russia. Uzbekistan is the representative place for Korean diaspora to have settled down in Central Asia at that time and mort Korean diaspora in Central Asia are living in Uzbekistan now. Korean diaspora have maintained a traditional way of living for 140 years without a deep relationship with Korea. This study examined the dwellings of the Korean diaspora of Uzbekistan in Central Asia by visiting their houses and conducting interviews. Results of the research were as following: 1) The houses of the Korean diaspora in Uzbekistan in early times consisted of 2-3 bedrooms with Gudle. Gudle is the most traditional element of the Korean diaspora's house and it has been used as a place for gathering family members. 2) Korean diaspora's houses in Uzbekistan were built according to Russian and Uzbek style but most of the Korean diaspora's have a mixed style with traditional Korean elements of living.3) The changing process of planning and building codes of apartments in Uzbekistan is similar to that in other CIS nations and all of Russia. 4) Korean's food style is a mixture of Korean, Russian and Central Asian foods. Kimchi and Jang (bean paste) are essential for most Koreans and most Koreans are making these at home. 5) Most Koreans have maintained a good relationship with the Uzbek people and Koreans are very active in gelling along well with all. This enables them to exchange their culture eventually in various parts. This study could be the first step to supply basic information for the study of the Korean diaspora in Uzbekistan. Deeper research over a wider range is needed in Russia.

Curdlan Acetate Microspheres를 이용한 Indomethacin의 pH 민감성 방출 (pH-Sensitive Release of Indomethacin from Curdlan Acetate Microspheres)

  • 이창문;이영진;김형주;박희정;이기영
    • KSBB Journal
    • /
    • 제20권1호
    • /
    • pp.46-49
    • /
    • 2005
  • 생분해성인 curdlan을 아세틸화하여 소수성 약물인 IND의 치료효과를 증진시킬 수 있는 약물전달시스템 개발을 위한 실험을 수행한 결과, IND가 포함된 CAMs를 제조할 수 있었고, IND의 loading efficiency는 $58.44\%$였다. 약물 방출 거동에 영향을 미치는 요인 중 제조한 CAMs의 swelling 특성은 처음 1시간 동안 pH 1.4에서는 아무런 변화가 없었고 PH 7.4에서는 $30\%$의 swelling을 보였고 pH 1.4에서보다 pH 7.4에서의 swelling이 약 3배 높았다. 또한 CAMs로부터 IND의 방출은 pH 1.4에서보다 pH 7.4에서 약 15배 이상 증가하였다. 이러한 결과로 CAMs는 IND의 약물전달시스템으로 유용할 것이며 특히 pH에 의존하는 약물방출 경향을 보였다.

Experimental Study on Poultices Applying to Remove Fixative (Paraloid B72) on Earthen Mural Painting

  • Lee, Kyeong Min;Moon, Hye Young;Yu, Yeong Gyeong;Kim, Soon Kwan
    • 보존과학회지
    • /
    • 제34권6호
    • /
    • pp.569-580
    • /
    • 2018
  • The possibility of applying poulticing was studied for removing Paraloid B72, a resin used for fixing an earthen mural painting. Five types of poultices were selected from clay and gel types, and acetone, ethanol, and methyl ethyl ketone(MEK) were used as mixed solvents. The possibility of mixing between the poultice and solvent was investigated, and then the spreadability, fluidity, acidity, drying properties, and solubility of the poultices were examined to confirm the characteristics. A poultice agent, which is suitable for applying to a mural painting, was selected and applied to a painting layer sample coated with Paraloid B72. As a result, all painting layers were good condition at under 50% of the solvent. The removal efficiency of Paraloid B72 was more effective when most of the solvents were used at 50%, rather than at 25%. However, it is difficult to mix 50% of MEK and ethanol with the gel-type poultices. When used at 25%, the removal performance was poorer than that at 50%, but the mixing with all the poultices was successful. In addition, the adsorption and removal power of the gel-type poultice were better than those of the clay-type, but the latter was expected to be more suitable in short-time cases due to its high drying speed. The results of this study show that the dissolution performance varies depending on the poultices and solvents. Hence, the poultice and solvent should be selectively applied, considering the fixative of the mural to be removed.