• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.381-391
• /
• 1999

A new 5th generation adhesive system(ONE-STEP) has been supplied which operators can apply to conditioned tooth surfaces by one simplified step. The purpose of this study was to determine whether different methods of adhesive application and various air drying duration after applying adhesive affect the shear bond strength of composite resin to dentin, and to evaluate the adhesive pattern of composite resin and dentin under SEM. Seventy-seven extracted human molar teeth were cleaned and mounted in palstic test tubes. The occlusal dentin surfaces were exposed with Diamond Wheel Saw and smoothed with Lapping and Polishing Machine (South Bay Technology Co., U.S.A.). Teeth were randomly divided into 7 groups (n=11), In experimental A group, adhesive was applied to dentin with agitation for 20 sec. In experimental N-A group, adhesive were continuously applied to dentin for 20 sec. Also control and experimental 1, 2, 3, 4 groups were dried for 10, 0, 5, 20, 30 seconds after applying adhesive, respectively, Adhesives were light cured for 10 sec. A gelatin capsule 5mm in diameter was filled with Aelitefil$^{TM}$ composite resin, placed on the treated dentin surface and light cured for 40 see, from three sides, All specimens were stored in distilled water at room temperature for 24 hours. The shear bond strengths were measured using a universal testing machine(AGS-1000 4D, Japan) at a crosshead speed of 5mm/min. An one-way ANOVA and LSD test were used for statistical analysis of the data. For SEM evaluation, seven specimens were made and sectioned. Representive postfracture and seven specimens were mounted on brass stubs, sputter-coated with gold and observed under SEM. The results were as follows : 1. The shear bond strength of experimental A group which adhesive were applied to dentin with agitation was higher than that of experimental N-A group (continuous application), and there was significant difference between two groups (p<0.01). 2. The interface between composite and dentin according to different application methods showed close adaptation in experimental A group and showed tinny gap in experimental N-A group. 3. The shear bond strength accoding to various air drying duration was the lowest value(7.57${\pm}$2.60 MPa) in experimental 1 group, so there was significant difference between experimental 1 group and other four groups (p<0.05). But there was no significant difference of shear bond strength between four groups (p>0.05). 4. The interface between composite and dentin according to various air drying duration showed close adaptation in control group and tinny gap in experimental 3 and 4 groups. But experimental 1 and 2 groups showed $30{\mu}$ and 6 - $10{\mu}m$ thick gaps, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.287-293
• /
• 2005

In this work, to develop soil inoculant which maintains stable viable cells and normalized quality, studies on micro-encapsulation with bacteria and yeast cells were performed by investigating materials and methods for micro-encapsulation as well as variation and stability of encapsulated cells. Preparation of capsule was conducted by application of extrusion system using micro-nozzle and peristaltic pump. K-carragenan and Na-alginate were selected as best carrier for gelation among K-carageenan, Na-alginate, locust bean gum, cellulose acetate phthalate (CAP), chitosan and gelatin tested. Comparing the gels prepared with Bacillus sp. KSIA-9 and carriers of 1.5% concentration, although viable cell of K-carragenan and Na-alginate was six times higher than those of other, Na-alginate was finally selected as carrier for gelation because it is seven times cheaper than K-carragenan. The gel of 1.5% Na-alginate was also observed to have the best morphology with circular hardness polymatrix and highest viable cell. When investigating the stability of encapsulated cells and the stabilizer effect, free cells were almost dead within 30 or 40 days whereas encapsulated cells decreased in 10% after 30 days and 15-30% even after 120 days. As stabilizer for maintaining viable cell, both 1% starch and zeolite appeared to possess the level of 70-80% cell for bacteria and yeast until after 120 days.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.2
• /
• pp.105-111
• /
• 2013

The experiments were carried out to investigate the biocontrol potential of Lysobacter capsici YS1215 on root-knot nematode and to characterize its lytic enzyme activities. L. capsici YS1215 showed chitinase and gelatinase activities on the medium containing 0.5% chitin or 0.5% gelatin as substrates. Cell growth of L. capsici YS1215 was highest at 6 days, and the highest activities of chitinase (4.0 unit $ml^{-1}$) and gelatinase (7.43 unit $ml^{-1}$) were observed on 3 and 5 days after incubation, respectively. To investigate the effect of L. capsici YS1215 on tomato growth and nematode infection, the plants in pot trial were treated with bacterial culture (BC), half of bacterial culture (HBC), only bacterial medium (BM), tap water (TW) and commercial nematicide (CN). HBC treatd plants showed the higher shoot fresh weight and dry weight on $5^{th}$week after incubation while BM, HBC and BC had consistently higher values than TW at $9^{th}$ week. HBC appeared to be the highest shoot fresh length at $9^{th}$ week. Both CN and BC showed lower number of egg mass, root gall, and population of juveniles in soil compared to BC, HBC, BM and TW. These results suggest that L. capsici YS1215 with its strong ability of lytic enzyme production can be one of the most significant candidates for biocontrol agents against root-knot nematodes.

• The Korean Journal of Mycology
• /
• v.26 no.3 s.86
• /
• pp.380-386
• /
• 1998

To obtain basic data for mass production of Isaria japonica, cultural characteristics of japonica were investigated by using liquid, solid media and silkworms pupa. Mycelia grew favorably at the temperature of $23{\sim}28^{\circ}C$ on MYG medium with pH 7.0. The fruiting-body of I. japonica was induced below $20^{\circ}C$ in MYG liquid medium (Malt yeast glucose) under fluorescent light. In MYG basal medium mixed with pupal powder of silkworms, the fresh weight of fruiting-bodies was increased with increasing concentration of pupal powder. The highest yield of fruiting bodies was obtained in carbon-rich medium supplemented with pupal powder of silkworm. Also, fruiting-bodies of I. japonica were produced massively on the silkworm pupa placed on the stainless tray in the shortest time. The structure and shape of fruiting-bodies were coral-like, many-branched types with numerous conidiospores.

• Journal of Life Science
• /
• v.18 no.4
• /
• pp.482-487
• /
• 2008

In this study, we screened and identified the bacterial strain showing high alkaline pretense inhibitor activity from marine environment. Nine bacterial strains with alkaline pretense inhibitor activity were isolated from marine sediments. Among them, strain C12 had the highest alkaline pretense inhibitor activity and was selected for further taxonomical study. On the basis of morphological and physiological characteristics, strain C12 was identified as the genus Streptomyces. A phylogenetic analysis of the 165 rDNA showed that the isolated strain was actually a member of the genus Streptomyces, because the determined sequence exhibited a higher homology with Streptomyces thermocarboxydus. Morphological characteristics showed cylindrical spore chain and smooth spore surface by scanning electron microscope. Strain C12 was grown on all media except for ISP 9 agar. This strain could be grown in the medium containing up to 9% NaCl.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.5
• /
• pp.899-904
• /
• 2004

The objectives of the experiment were to examine the effects of extrusion process variables on the yield of extruded ginseng extract and to determine the effect of ratio of extruded ginseng extract and microcrystalline cellulose on characteristics of spheronized granules by cold extrusion-spheronization process. Extrusion process variables observed were feed moisture (15, 22, 29%), die temperature (90 110 13$0^{\circ}C$) and screw speed (150 200, 250 rpm). The results showed that moisture content of dried ginseng significantly affected extraction yield (P<0.05). The less moisture content of the feed resulted in the higher yield of the extract. Moisture content of 15%, screw speed of 250 rpm and die temperature of 13$0^{\circ}C$ gave the highest yield of ginseng extract. Mean extraction yield of extruded ginseng using hot water extraction was greatly improved by extrusion process The extract yield of extruded ginseng was 43.5% which was higher than that of red ginseng (38.3%) and white ginseng (29.0%) produced by traditional process. It was possible to make from the mixture of microcrystalline cellulose (200 g) mixed with different concentration of 200 mL solution (0, 5, 20, 30 40 50 60% of ginseng extract with 59.2% dry solid) by using cold extrusion spheronization. When the concentration of ginseng extract Increased, the granulation yield was improved but friability and compression index were reduced. Ginseng extract such as saponin was completely released from spheronized granules in distilled water within 10 min. It can be concluded that spheroniged granule with ginseng extract could be packed in gelatin capsule since granules Possessed proper physical properties and quick release of saponin.

• Archives of Pharmacal Research
• /
• v.20 no.6
• /
• pp.555-559
• /
• 1997

The three different batches of an oral sustained release melatonin (MT) delivery system were prepared by aqueous-based fluid-bed coating of the sugar spheres for the evaluation of in vitro release characteristics and plasma concentration profiles in human subjects. The MT contents in 20% coated sugar spheres of three batches (B1, B2 and B3) were $3.3{\pm}0.08$, $2.4{\pm}0.1$ and $2.5{\pm}0.13$ mg per gram of coated sugar spheres, respectively. The release profiles of three different batches had a very similar fashion. However, the release profiles of three different batches had a very similar fashion. However, the release half-lives $(T_{50%})$ of MT from B1, B2 and B3 was $3.70{\pm}0.2$, $5.2{\pm}0.2$ and $4.9{\pm}0.07h$, respectively. Plasma concentration profiles of sustained release 0.2mg melatonin-loaded sugar spheres containing 10% immediate release melatonin in gelatin capsules (B1 and B2) were then evaluated in human subjects. The in vivo plasma concentration profies of the two batches (B1 and B2) were very similar each other and located between the physiological endogenous ranges. The time to reach the peak concentration $(T_max)$ was more advanced in case of B1 when compared to B2. However, there was no statistically significant difference in the maximum concentration $(C_max)$ and the area under the curve (AUC) between B1 and B2. The AUC of melatonin-loaded sugar spheres containing 10% and 20% immediate release MT in human subjects had a good linearity between dose and AUC, regardless of the fraction of immediate release MT, indicating the first order elimination process of MT within these doses. The current oral sustained release MT delivery system may be utilized to treat circadian rhythm disorders if it is proven to be more clinically useful when compared to immediate release MT.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.22 no.2
• /
• pp.83-93
• /
• 2011

Biochemical and enzymatic characterization for extracellular protease isolated from Cordyceps militaris cultivated on rice bran medium was investigated. C militaris produced proteolytic enzymes from 10 days after inoculation, maximum enzyme production was found at 25 days. The optimum temperature and pH of proteases production was at $25^{\circ}C$ and pH 7.0, respectively. The protease activity was observed in the four peaks (Pro-I, Pro-II, Pro-III, and Pro-IV) separated through Sephadex G-100 column chromatography. The separated protease was optimally active at $25^{\circ}C$. Optimum pH of the protease was between 7 and 8. Enzyme was also stable over at $30-80^{\circ}C$. The enzyme was highly stable in a pH range of 4-9. Protease activity was found to be slightly decreased by the addition of $Mg^{2+}$, $Mn^{2+}$, $Zn^{2+}$, $Fe^{2+}$ and $Cu^{2+}$, whereas inhibited by the addition of $Ca^{2+}$ and $Co^{2+}$ Protease activity was inhibited by protease inhibitor PMSF. On the other hand, the partially purified protease was investigated on proteolytic protease activity by zymogram gel electrophoresis using three substances (casein, gelatin and fibrin). Four active bands (F-I, FII, F-III, and F-IV) of fibrin degradation were revealed on fibrin zymogram gels. Both of F-II and FIII showed caseinolytic, fibrinolytic and gelatinolytic activities in three gels. Thermostability, pH stability, and pH-thermostability of the enzyme determined the residual fibrinolytic activity also displayed on fibrin zymogram gel. The only one enzyme (F-II) displayed over a broad range of temperature at $30-90^{\circ}C$. The FII displayed fibrinolytic activity in the pH range 3-5, but was inactivated in the range of pH 6-11. The F-I and F-III showed enzyme activity in the pH range of 6-11. In the pH-thermostability, the F-II only kept fibrinolytic activity after heating at $100^{\circ}C$ for 10, 20 and 30 min at pH 3 and pH 7, respectively. On the other hand, the F-II was retained activity until heating for 10 min under pH 11 condition. By using fibrin zymogram gel electrophoresis, extracellular fibrinolytic enzyme F-II from C. militaris showed unusual thermostable under acid and neutral conditions.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.6
• /
• pp.442-446
• /
• 2007

From the rhizoplane and rhizosphere of pepper, tomato, lettuce, pasture, and grass, unsoluble inorganic phosphate solubilizing bacterial strains were isolated using plate base assay on Pikovskaya's medium. Two strains, CL-1 and CL-2, which produced largest halo on plates (indicative of phosphate solubilization)were selected for further studies. Based on these biochemical and 16S rRNA analysis strains CL-1, CL-2 were found to be as species of Pseudomonas sp. and Kluyvera sp., respectively. In broth assay Pseudomonas sp. CL-1 and Kluyvera sp. CL-2 solubilized insoluble phosphate by 193.4 mg and $493.6P\;mg\;L^{-1}$, respectively after $3^{rd}$ day inoculation. These effecient phosphate solubilizing bacteria have a potential to be developed as microbial based fertilizer in future.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.253-258
• /
• 2019

The gilt bronze statue, Seated Avalokiteshvara with a Thousand Hands, of the Goryeo dynasty, is the only one in Korea of its kind that has undergone a conservation process for the special exhibition entitled GORYEO: The Glory of Korea. For the conservation treatment, first, a component analysis (XRF) was conducted, and a manufacturing technique (CT) was analyzed. The results of the investigation revealed that the statue was alloyed with Cu, Sn, and Pb ternary bronze. Its surface, except for the detached plating layers, was originally plated using the mercury amalgam method. This statue was assembled after separately casting each part of the body, such as the left and right arms and the wrists, including the hands, with objects. In particular, each wrist was cast and fitted with a metal nail to express each object in the hands more precisely. Inside the statue, there were five iron cores: two for the head, one for the left elbow, one for the right flank, and one for the right waist. For the preservative treatment, natural adhesive agents, including vegetable gelatin and glue (20%), were mixed with alcohol to protect the base metal and adhere to the plating layers. Using synthetic resin (CDK 520+SN-sheet) for the damaged parts, the restored parts could be attached and detached to/from the statue. Eventually, the compositional analysis and conservation treatment left the statue in a stable condition and ready for exhibitions and future studies.