• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.377-380
• /
• 2001

The BST thin films to composite (Ba$\sub$x/Sr$\sub$l-x/)TiO$_3$ using sol-gel method were fabricated on Pt/Ti/SiO$_2$/Si substrate. The thin film capacitor to be ferroelectric materials was investigated by structural and electrical properties. BST solution was composited by moi ratio, and then spin-coated (from 3 times to 5 times coating on Pt/SiO$_2$/Si substrate. Thickness of BST ceramics thin films are about 2600∼2800[${\AA}$] in 3 times deposition. The property of leakage current was stable when the applied voltage was 3[V]. Leakage current of 3 times coated BST thin film was 10$\^$-9/∼10$\^$-11/[A] at 0∼3[V].

• 한국세라믹학회지
• /
• 제32권1호
• /
• pp.17-24
• /
• 1995

The TEA complex polymeric sol was prepared by the alkoxide sol-gel method. The purpsoe of this experiment was to vefity the particle shape in the sol from the investigation of the rheological properties. TEA retarded hydrolysis rate by the reaction with alkoxide enough to make a stable transparent sol in the wide range of composition. From the results of the viscosity change with time, the optimum mole ratio for spinning was selected as 0.5 mole of TEA, 3 mole of H2O and the optimum viscosity was 104 cPs. The rheological behavior of the sol showed that the particle shape in the sol was linear, which was adequate for fiber drawing.

• 한국세라믹학회지
• /
• 제28권12호
• /
• pp.943-952
• /
• 1991

Lead zirconate titanate(PZT) powders and thin films were prepared from an alkoxide-based solution by sol-gel method. Gelation of synthesized complex solutions, pyrolysis and crystallization behaviors of the dried powder were studied in accordance with a water content and a catalyst. PZT thin films were formed by spin-casting method on silicon and platinum substrates, and characterized. Ester produced from the reactions was completely removed when drying of the gel was finished. Pyrolysis property of the dried PZT gels were changed in order water content, class of catalyst, and quantity of catalyst. Crystalline Pb phase was transiently formed near 250$^{\circ}C$. Basic catalyst is good additive for a formation of perovskite phase in the films, and acidic catalyst for a densified film structure. By the analysis of RBS, Pb element in the PZT films were diffused into silicon substrate, and the pores, may be produced due to local densification around some grains in the films, make an origin of fault in microstructure when holding time goes to be longer at 700$^{\circ}C$.

• 한국식품과학회지
• /
• 제16권2호
• /
• pp.185-191
• /
• 1984

전분 젤의 특성을 정토하기 위하여 녹두, 감자, 고구마로 제조한 전분 겔 및 감자, 고구마 전분에 녹두 전분을 혼합하여 제조한 전분 겔의 구조 및 텍스쳐를 측정하고. 관능검사에 의해 전분 겔의 수응력을 평가하였다. 균일하고 porous한 구조를 보인 녹두 겔이 텍스쳐 측정치가 높은 값을 나타냈으며 관능검사에서도수응력이 높게 평가되었다.

• 방사선산업학회지
• /
• 제2권1호
• /
• pp.15-19
• /
• 2008

In order to develop a water-solubility and biocompatibility, chemically modified chitosan, N,O-carboxymethylchitosan (NOCC), was synthesized and the NOCC hydrogels were prepared by using ${\gamma}-ray$ irradiation instead of chemical reagents. The FT-IR spectroscopy, swelling behavior, gel content and mechanical property such as gel strength of the hydrogel were measured. When the NOCC solution concentration was 15 wt% and the dose of irradiation was less than 50 kGy, the NOCC hydrogels had an excellent hydrophilicity and exhibited a good swelling behavior and mechanical properties.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.168-172
• /
• 2018

This study first investigates the effect of the choice of cation on three different ionic-liquid-based gel polymer electrolytes (ILPEs) with polyimide membranes. The preparation of three ILPEs based on electrospun membranes of PI and incorporating a room-temperature ionic liquid, 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide complexed with lithium bis(trifluoromethylsulfonyl)imide, is described. ILPE-EMImTFSI has an ionic conductivity as high as $5.3{\times}10^{-3}S\;cm^{-1}$ at $30^{\circ}C$. Furthermore, it shows higher thermal stability and electrochemical oxidation stability compared to the other two ILPEs because of its stronger bonds. These results indicate that polyimide-based ILPE-EMImTFSI is a good candidate for use in high-safety rechargeable lithium metal batteries.

• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.441-446
• /
• 2003

ZnO 미세 분말을 sol-gel법으로 제조하였다. Gel분말의 형상은 하소 열 처리 온도에 따라 판상, 침상,그리고 구형으로 변화하였고, $700^{\circ}C$ 이하 하소 온도에서는 온도에 따른 입자 성장 속도가 낮았지만, $700^{\circ}C$ 이상의 온도부터 급격한 입자 성장 속도를 나타내었다. 입자 사이즈가 커질수록 결정화 정도는 더 커졌고, gel분말의 유기 화합물들은 30$0^{\circ}C$ 이하 온도에서 휘발되었다. 열 처리 온도에 따른 ZnO 분말은 S자형(sigmoidal shape)의 전기전도성 거동을 보였고, gel분말의 열처리 온도가 감소할수록 일정한 전도성이 일정한 온도 구간이 좁게(narrow) 나타났다. 최적의 CO 기체 센싱 특성은 50$0^{\circ}C$의 하소 열처리한 시편에서 나타났고, 열처리 온도가 올라갈수록 센싱 특성은 감소하였다.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제21권4호
• /
• pp.329-336
• /
• 2021

Background: In the field of dentistry, topical anesthetics play an important role in reducing pain during needle pricks. The anesthetic property of betel leaves remain unexplored, even though they have been widely used for the treatment of various ailments. The purpose of this study was to compare and evaluate pain perception following topical application of lignocaine gel, clove gel, ice, and newly developed betel leaf extract gel during intraoral injection in children. Methods: Sixty children aged 6-10 years who met the inclusion criteria were divided into four groups. Topical anesthetic agents, 2% lignocaine (Lox-2% Jelly, Neon, Mumbai, India), 4.7% clove gel (Pain Out Dental Gel, Colgate Palmolive India Ltd, Solan, India), 10% betel leaf extract gel, and ice were applied to each group for one min, followed by administration of infiltration anesthesia. Pain perception was analyzed during needle insertion. The Wong Bakers FACES pain rating scale (WBFPRS) was used for subjective assessment and the Sound, Eye, Motor (SEM) scale for objective assessment. Recorded values were tabulated and subjected to appropriate statistical analysis using SPSS software with a P value set at 0.05. Results: The clove oil and betel leaf groups demonstrated the highest WBFPRS scores, followed by the ice and lignocaine groups. The clove, betel leaf extract, and ice groups showed equal and highest SEM scores, followed by the lignocaine group. The mean WBFPRS and mean SEM scores were statistically significant. Conclusion: Betel leaf extract gel is effective in reducing pain and can act as an alternative topical anesthetic agent.

• Journal of Animal Science and Technology
• /
• 제65권5호
• /
• pp.1065-1080
• /
• 2023

The solubility and structure of myosin and the properties of pork gel with NaCl, KCl, CaCl₂, and MgCl₂ were investigated. Myofibrillar proteins (MPs) with phosphate were more solubilized with NaCl than with KCl (p < 0.05). CaCl₂ and MgCl₂ showed lower MP solubilities than those of NaCl and KCl (p < 0.05). The α-helix content of myosin was lower in KCl, CaCl₂, and MgCl₂ than in NaCl (p < 0.05). The pH of pork batter decreased in the order of KCl, NaCl, MgCl₂, and CaCl₂ (p < 0.05). The cooking yield of the pork gel manufactured with monovalent salts was higher than that of the pork gel manufactured with divalent salts (p < 0.05). The pork gel manufactured with KCl and MgCl₂ showed lower hardness than that of the pork gel manufactured with NaCl. The solubility and structure of myosin were different with the different chloride salts and those led the different quality properties of pork gel. Therefore, the results of this study can be helpful for understanding the quality properties of low-slat meat products manufactured by replacing sodium chloride with different chloride salts.

• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.735-740
• /
• 2002

고분자 필름의 무적성을 향상시키기 위하여 우수한 친수성 및 높은 가시광선 투과율을 보이는 유기-무기 혼성 코팅용액을 졸-겔법으로 합성하였다. 코팅용액은 입자 직경이 15 nm 크기의 무기물인 콜로이드 실리카 용액(Ludox)에 유기 조성을 함유한 화합물인 GPS을 첨가하여 제조되었다. 실란 커플링제인 GPS는 콜로이드 실리카와 주변의 매트릭스(matrix)인 고분자 필름에 각각 강한 결합을 형성하여 두 개의 서로 다른 물질을 강하게 연결하는 결합제 역할을 한다. 강산성 조건 하에서 제조된 혼성 코팅용액으로 고분자 필름 위에 코팅한 경우는 코팅필름의 표면이 거의 균열이 없는 매끈한 미세구조를 보이는 반면, 약산과 염기성 조건 하에서 제조된 혼성 코팅용액으로 코팅한 경우에는 균열이 심한 미세구조를 보였다. 또한 pH 2의 산성 조건에서 제조한 필름은 우수한 친수성 및 높은 가시광선 투과율을 보인 반면, 염기성 조건으로 제조한 코팅필름은 친수성이 좋지 않았으며, 낮은 가시광선 투과율을 보였다.