• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.390-394
• /
• 1999

In this paper, we have evaluated BER performance of digital subscriber line(DSL) using the twisted-pair channel model by means of Semi-analytic simulation technique. As a result, it was known that the Semi-analytic simulation was proved to be a good technique because of the attenuation of 0.5dB. To keep the BER=10$\^$-7/, 4dB of E$\^$b//N$\^$0/ is needed more when the DSL length extends to 5000m, while 2dB increase of E$\^$b//N$\^$0/ is required when Nyquist frequency goes to 512kb/s with the keeping same distance. In addition, the effect by FEXT noise is serious, when the FEXT noise damping constant, k is over 10/sup-10/ in DSL length and 10$\^$-14/ in the aspect of Nyquist frequency. As the basic, results of this analysis can be used in setting in internal and external standardization of DSL system in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.11C
• /
• pp.1498-1509
• /
• 2004

In this paper, we evaluate the performance of a noncoherent OOK (On-Off Keying) UWB (Ultra Wide Band) system based on power detection with noise power calibration and noise power windowing for ubiquitous sensor network applications in typical indoor wireless channels. Utilizing noise power calibration and noise power windowing, the current noise information can be initially or adaptively provided to determine suitable detection threshold value for signal demodulation. Simulation results show that the noncoherent OOK UWB system using noise power calibration achieves good BER (Bit Error Rate) performance which is favorably comparable to that of the system using the ideal adaptive threshold, while maintaining simple receiver structure. However, despite the serious loss of the data transmission rate, the performance improvement by noise power windowing is not so remarkable. furthermore, these performance results are similarly maintained in BEE 802.15 Task Group 3a UWB indoor channel model, and it is also revealed that the BER performance can be significantly improved by increasing the pulse repetition rate.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.28-32
• /
• 2014

In this paper, we analyzed the performance of cyclostationary signal detection scheme for LTE system. We applied the cyclostationary signal detection scheme to the cognitive radio(CR) technology, which improves the usage efficiency of spectrums and shares frequencies, and we detected the signal in the long term evolution(LTE) band. LTE system has been designated as the standard to improve the maximum data rate and provide the low latency in the 3rd generation partnership project(3GPP). In this paper, we generated the LTE signals based on the orthogonal frequency division multiple access(OFDMA) and analyzed the performance of signal detection in accordance with the segment and threshold of the generated signals. Gaussian channel was used in the simulation and we discussed the future studies to apply the CR to the LTE system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.668-675
• /
• 2001

Recently, the performance of the commercial PCS(Personal Communication Service) system has been improved to the uppermost limit and ultimately the next generation mobile communication is to be realized by IMT-2000 (International Mobile Communication-2000) to provide multimedia services. Therefore, the new type receiving system is researched actively and one of the most important part in a receiver is direct conversion method. The direct conversion method is suitable for low power consumption, small size, MMIC, and low price, which is to be adopted to the next generation mobile communication systems. In this case, however, several problems occur due to DC-offset. The DC-offset suppresses amplification of the required signal because of the leakage signal of frequency synthesizer in the system. In this thesis, the removing method of DC-offset was considered. There are four removing techniques of DC-offset, which are AC-coupling, large capacitor, DC-feedback loop, and DC-free coding. Among these, the AC-coupling method is the most simplest method and the DC-feedback loop method has the best performance. Then, the performance of the AC-coupling method and DC-feedback loop method are evaluated by HP's ADS simulation tool. As a result, the AC-coupling method cannot be used to the digital communication systems due to data loss. On the other hand, it was confirmed that the DC-feedback loop method is suitable for the direct conversion receiver.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.3 no.2
• /
• pp.30-38
• /
• 1992

In this paper, in order to apply the $\pi$/4 shift QPSK to TCM, we propose the $\pi$/8 shift 8PSK modulation technique and the trellis-coded $\pi$/8 shift 8PSK performing signal set expansion and set partition by phase difference. In addition, the Viterbi decoder with branch metrics of the squared Euclidean distance of the first phase difference as well as the Lth phase difference is introduced in order to improve the bit error rate(BER) performance in differential detection of the trellis-coded $\pi$/8 shift 8 PSK. The proposed Viterbi decoder is conceptually the same as the sliding multiple de- tection by using the branch metric with first and Lth order phase difference. We investigate the performance of the uncoded .pi. /4 shift QPSK and the trellis-coded $\pi$/8 shift 8PSK with or without the Lth phase difference metric in an additive white Gaussian noise (AWGN) and Rayleigh fading channel using the Monte Carlo simulation. The study shows that the $\pi$/4 shift QPSK with the Trellis-code i. e. the trellis-coded $\pi$/8 shift 8PSK is an attractive scheme for power and bandlimited systems and especially, the Viterbi decoder with first and Lth phase difference metrics improves BER performance. Also, the next proposed algorithm can be used in the TC $\pi$/8 shift 8PSK as well as TC MDPSK.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.221-231
• /
• 1997

This paper presents an analysis of a hybrid direct-sequence/slow frequency hopped code division multiple access(DS/SFH-CDMA) system employing noncoherent M-ary frequency shift keying(MFSK) modulation in a multiple m-distribution fading environment. Multipath interfer- ence(MPI) and multiuser interference(MUI) is taken into accout and the spectral efficiency is calculated for uncoded as well as simple channel coding systems. The predetection multipath CCI canceller in conjunction with convolution coding is employed for improving the bit error rate(BER) performance. The BER of noncoherent hybrid system is obtained using a Gaussian interference approximation. From the results, we know that the error performance more deteriorates as the depth of fading becomes deeper. The DS part of the modulation combats the multipath interference, whereas the FH part is a predetection against large multiuser interference. It is shown that, for the con- sidered types of a channel coding, the use of a predetection coding is still essential for obtained a satisfactory bit error performance. The results show that the capacity of the DS/SFG-CDMA MFSK communication system increases in proportion to the length of PN code sequence in the presence of AWGN and MUI. In m-distribution fading environment the capacity increases in proportion to the fading index. The capacity is increased and error performance is improved when the CCI Canceller and Convolution code technique are adopted, respectively. From the results, it is known that the error performance of $4\times10^{-2}$ by adopting Canceller technique. Also convolutional coding technique is the improvement of error performance attains about $10^{-5}$ in code rate 1/2.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1005-1015
• /
• 2000

In this paper, the performance of Hybrid CDU MFSK system has been analyzed in the environment that narrowband Class-A impulsive noise include Gaussian noise in wireless communication channel and Nakagami fading. The performance of system improved to adopting both of technique MRC diversity and BCH channel coding. The results show that there is substantial degraded in Hybrid CDMA system performance by impulse index is stronger and the fading index is smaller. But also improvement can be obtained when BCH coding techniques are adopted. Additional MRC diversity techniques is more improvement than BCH coding techniques when degraded environment with the low fading index. But BCH coding techniques is more improvement than MRC diversity techniques when fading index has been increased. The Hybrid CDMA MFSK system is incomplete to voice communication standard BER$(10^{-3})$ in Rayleigh fading by independent each adopting techniques BCH coding and MRC diversity. But it's satisfy(improvement can be obtained) to voice communication standard BER in strong impulse noise(24dB over) by adopting techniques BCH coding and MRC diversity at a time. Additional it's a substantial enhancement $(10^{-3})$satisfaction) in fading index (m=3, 22dB) in addition to strong impulse noise and 24dB over with data service standard $(10^{-5})$ BER satisfaction. This result show that there is error performance improved by diversity branch and coding advantage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.7
• /
• pp.1797-1806
• /
• 1998

Future satellite communication systems will be developed at Ka-band (20/30 GHz) owing to the relatively wide frequency allocation and current freedom from terrestrial interference for multimedia services. A serious disadvantage of the Ka-band, however, is the very high atmospheric attenuation in rainy weather. Synchronous CDMA drastically redces the effect of self-noise with several interesting features of CDMA for mobile communications such as fixible freuqncy rese, the capability of performin soft-handover and a lower sensitivity to interference. This paper evaluates the performance of a synchronous CDMA reture link for a Ka-band geostationary satellite communication system. For a fixed satellite channel whose characteristics depend on weather conditions, the signal envelope and phase for this channel is modelled as Gaussian. The bit error and outage probability, and the detection loss due to imperfect chip timing synchronization is analytically evaluated and the system capacity degaradation due to the weather condition is estimated. The two cases consist of the general case in which all users are affected by rain condition, and the worst case in which the reference user is only affected by rain attenuation. the results for two cases of rain condition clearly show that synchronous CDMA eases the power control requirements and has less sensitivity to imperfect power control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2709-2714
• /
• 2014

This paper has analyzed the change of threshold voltage and conduction path for the ratio of top and bottom gate oxide thickness of asymmetric double gate MOSFET. The asymmetric double gate MOSFET has the advantage that the factor to be able to control the current in the subthreshold region increases. The analytical potential distribution is derived from Poisson's equation to analyze the threshold voltage and conduction path for the ratio of top and bottom gate oxide thickness. The Gaussian distribution function is used as charge distribution. This analytical potential distribution is used to derive off-current and subthreshold swing. By observing the results of threshold voltage and conduction path with parameters of bottom gate voltage, channel length and thickness, projected range and standard projected deviation, the threshold voltage greatly changed for the ratio of top and bottom gate oxide thickness. The threshold voltage changed for the ratio of channel length and thickness, not the absolute values of those, and it increased when conduction path moved toward top gate. The threshold voltage and conduction path changed more greatly for projected range than standard projected deviation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.1049-1055
• /
• 2018

This paper proposes the Signal Quality Indicator (SQI) to certify the wired communication channels connected between sub-systems embedded in guided flight systems. The communication signals can be distorted due to the poor interconnections of wired channels, the interference from the signals passing through the adjacent routed channels, and additive white Gaussian noises. As the ways to find out the condition of the communication channels, we present the Hamming distance based SQI (H-SQI) and the Euclidean distance based SQI (E-SQI). Two SQIs are compared in terms of the SQI resolution performance and the required number of hardware resources for implementations. The E-SQI requires the 10 times FPGA resources and an additional analog-digital converter over the H-SQI in spite of its outstanding SQI resolution performance. Moreover, the H-SQI could have the enough SQI resolution performance to find out the channel condition by increasing the oversampling rate, so the H-SQI is the more adequate than the E-SQI for the SQI of the guided flight systems.