• Elastomers and Composites
• /
• v.6 no.1
• /
• pp.71-81
• /
• 1971

The intention of this study is to investigate the properties of polymer blend, NBR/PVC vulcanizates and blending procedures such as roll-mixing temperatures and sequences for polymer blending of NBR and PVC(resin type). The results obtained are as follows: 1. The roll temperature applied for polymer blending is around $150^{\circ}C$. At this temperature region, the degradation of rubber stock, which may be caused by heat, can be minimized and mill processing in practical application in industries can also be facilitated. 2. It is obviously necessary that a small amount of plasticizers should be added to the stock for improving processibility of roll mixing and physical properties. 3. On roll-mixing sequence, it is more effective that PVC compounded with plasticizer is added to NBR milled on hot roll. 4. The vulcanizates of the blends with different degree of polymerization of PVC ale similar to one another in properties. 5. NBR/PVC(70/30) blends shows the better physical characters than eve,-made foreign latex blend except abrasion-resistance. 6. As PVC addition ratio is increased, the physical properties such as resistance to ozone, tear, heat and oil and tensile strength, modulus, hardness have also improved, on the other hand, tension set and rebound character decreased. 7. The curve of ultimate elongation have point of inflection at the ratio of $30\sim40$ part of PVC. 8. While CR is blended, the physical properties such as brittle point, rebound and resistance to oil in high temperature have improved. 9. Polymer blend of NBR and domestic PVC is applied for the industrial utility such as rubber sole and heel, electric wire cover and oil-resistant packing, coating and gasket, printing roll, film for food packing etc.

• Elastomers and Composites
• /
• v.47 no.2
• /
• pp.121-128
• /
• 2012

Waste EPDM(W-EPDM) collected from the automotive weather strip and the gasket of a laundry machine has not been effectively recycled. Using this W-EPDM powder and other ingredients, i.e., binder(polyolefin resin, polyolefin elastomer, etc.), filler and additives, various economic rubber composites were made by extrusion. In advance of main experiments, the effects of ultrasonic treatment of W-EPDM on the property of rubber composites, comparison in the property of the composites of W-EPDM with those of virgin and devulcanized EPDM, and waste tire rubber were investigated. Also, the properties of the rubber composites extruded with a 12-screw extruder were compared with those extruded with twin-screw extruder. Various W-EPDM composites for synthetic turf filler and car mat were extruded and injection molded, and 3 main properties of tensile strength, elongation and hardness were investigated to develop economical and proper recipes of the rubber composites.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.212-216
• /
• 2010

The materials of the lithium ion battery gasket require chemical resistance to the electrolyte, electrical insulating, compression set, anti-contamination and heat resistance. To estimate suitability for rubber which has better performance to compression set than PFA, each compound were made with various rubbers, such as EPDM, NBR, FKM, FVMQ, VMQ and we checked the characteristics of each compound. Samples from each compound was deposited in Propylene Carbonate and tested for changing of Hardness and Volume during 1,000 hr with $80^{\circ}C$. EPDM and VMQ showed good performance to chemical resistance to the electrolyte, and also we could get the values over $10^{10}{\Omega}cm$ on volume resistance basis in electrical insulating. EPDM and VMQ were judged as the most suitable material.

• Journal of Hydrogen and New Energy
• /
• v.23 no.5
• /
• pp.468-475
• /
• 2012

A proper stacking force and assembly are important to the performance of fuel cell. Improper assembly pressure may lead to leakage of fuels and high interfacial contact resistance, excessive assembly pressure may result in damage to the gas diffusion layer and other components. The pressure distribution of gas diffusion layer is important to make interfacial contact resistance less for stack performance. To analyze the influence of design parameter factors for pressure distribution, and to optimize stack design, DOE (Design of Experiment) was used for polymer electrolyte membrane fuel cell stack pressure test. As commonly known, the higher clamping force improves the fuel cell stack performance. However, non-uniformity of stress distribution is also increased. It shows that optimization between clamping force and stress distribution is needed for well designed structure of fuel cell stack. In this study, stack design optimization method is suggested by using FEM (Finite Element Methode) and DOE for light-weighted fuel cell stack.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.35-41
• /
• 2014

The present study has been carried out to reduce the heat loss from a refrigerator by numerical heat transfer analysis and temperature measurement experiment for the verification of heat transfer analysis result. To perform this purpose, two dimensional heat transfer analysis and measurement of temperature on the surface of freezer for the horizontal cross sectional plane of a refrigerator has been accomplished. From the present study, it could be seen that the steel support in the mullion near gasket region has a heat transfer characteristics which transfer outside heat well from the high temperature hotline and outside air to the inner refrigerator. The effect of removing steel support on the reducing heat loss of a refrigerator was 24.8% and removing steel support might introduce significant improvement of refrigerator heat loss.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.1
• /
• pp.54-63
• /
• 2023

In this paper, a VHF band conformal antenna for UAV mounting was developed. The proposed antenna was designed as an shape-adaptive structure by minimizing the antenna height to be advantageous in RCS reduction performance. As for the antenna radiator, the outer radiator was arranged around the inner radiator to apply the CRLH zeroth-order resonance structure. With this structure, the height of the antenna was minimized, and it was reduced by about 70 % compared to the existing blade antenna. In addition, for impedance matching, the intermediate frequency bandwidth of the VHF band was improved through the sleeve pin of the inner radiator, and the low frequency bandwidth of the VHF band was improved by applying an EMI shielding gasket to the shorting pin of the outer radiator. The proposed antenna was manufactured and measured to verify the performance of the device and the performance after UAV mounting. As a result, the standard was satisfied for the operating frequency.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.203-209
• /
• 2023

The increasing saturation challenges in storage facilities for Low- and Intermediate-Level Radioactive Waste call for a more efficient storage approach. Consequently, we have developed a square-structured container that features a storage capacity approximately 20% greater than that of conventional drum-type containers. Considering the need to contain various radioactive wastes from nuclear power usage securely until they no longer pose a threat to human health or the environment, this study focuses on evaluating the sealing efficacy of the newly designed rectangular container using finite element analysis. Since radioactive waste containers typically do not experience external forces except under special circumstances, our analysis simulated the impact of an external force, assuming a fall scenario. After fastening the bolts, we examined the vertical stress distribution on the container by applying the calculated external force. The analysis confirms the container's stable seal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.5029-5037
• /
• 2015

The objective of this study is to investigate the distribution of asbestos containing materials and to evaluate risk assessment method in some schools, Korea. For the survey on ACM risk assessment, we used both EPA AHERA rule and ASTM rule. We investigated 100 schools between January and December in 2010. Detection rate of the ACM according to construction year showed that before 1980's, 1990's, 2000's, after 2000's buildings were 100%, 94.1%, 100% and 62.5%, respectively. Compared with school types, detection rate of the ACM in Kindergarten, Elementary, Middle, High, Special Education schools were 100%, 97.1%, 92.9%, 100%, 80%, respectively. Ceiling textiles contained chrysolite/mixed amosite(2~8 %) and wall cement flat boards contained chrysolite(6~11 %). Also, gasket contained chrysolite(16~17 %), slate roof contained chrysolite(10~13 %). In this study, risk assessment EPA AHERA rule of ACM showed that all materials were "Pool" grade. And, ASTM rule risk assessment showed that all materials were "Q&M program" grade.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.123-130
• /
• 2013

$CO_2$ enrichment systems have been recently used to shorten the growth period of plants and the improvement of harvest and its quality. To accomplish these goals, manifold should be designed to supply the same amount of $CO_2$. In this study, CFD approach has been used to understand the effects of geometric parameters, such as tube and hole diameters. An optimized geometry has been derived through pipe and tube part, respectively. As a result, the deviation of flow rate less than 0.1 g/s was expected at all holes of the $CO_2$ enrichment system.

• Korean Journal of Food Science and Technology
• /
• v.39 no.6
• /
• pp.715-720
• /
• 2007

The levels of butyltin compounds in poly(vinyl chloride) (PVC) food packaging using gas chromatography/mass spectrometry (GC/MS) were monitored. The analytical method, involving the ethylation with sodium tetraethylborate, was found to be selective and sensitive for mono-n-butyltin (MBT), di-n-butyltin (DBT), and tri-n-butyltin (TBT), validated by a $0.005\;{\mu}g/mL$ limit of detection (LOD), an $R^2>0.999$ for linearity, and >90% of recovery, respectively. Finally, none of the commercial food wraps and gaskets showed detectable levels of butyltin compounds.