본 연구에서는 광촉매의 광자효율을 증가시키고, 물성을 변화시켜 광촉매 성능을 향상시키기 위하여, 자동차 폐 촉매에서 추출된 귀금속 용액 또는 $H_2PtCl_6$ 용액을 수열합성법에 의해 제조된 $TiO_2$와 상업용 $TiO_2$인 P-25(Degussa Co.)를 함침시켜 변조된 광촉매를 제조하였다. 그리고 변조된 광촉매는 ICP-AES, EDS, UV-DRS, XRD, XANES, SEM에 이용하여 물성분석 하였다. 그리고 폐 자동차 촉매전환기의 추출용액을 함침시킨 광촉매를 변조하여 band-gap energy를 1.76eV(705 nm)의 가시광 영역까지 조절하였다. 변조된 광촉매는 PVC가 주성분인 벽지 코팅제와 농도별로 혼합하여 광화학반응을 위한 기능성 도료를 제조하였다. 이 도료를 사용하여 광촉매가 코팅된 기능성 벽지를 제조하였으며, 제조된 벽지의 광촉매 성능을 평가하였다. 반응모델 물질로 NO를 이용하여 촉매 조성, 반응물 농도, 벽지의 촉매 담지량, 반응시간에 따른 광 화학반응속도를 측정하였다. 그 결과 폐 자동차 촉매전환기의 추출용액으로 변조된 $TiO_2$의 광촉매 활성이 크게 증가하였음을 알 수 있었고 그 중에서도 P-25에 추출용액을 함침시킨 P-25(w)의 광촉매가 가장 우수한 광촉매활성도를 나타내었다.
스케일업된 초음파 분무 열분해 공정을 이용하여 양산용 구형 $SiO_2$ 분말을 합성하였다. 초음파 분무 열분해 공정에 사용된 전구체는 20 nm에서 30 nm의 $SiO_2$ 입자를 포함한 수계 $SiO_2$ 졸을 사용하였다. 초음파 분무 열분해 공정의 구동 조건과 전구체 조건의 변화가 합성된 $SiO_2$ 입자에 미치는 영향을 알아보기 위해 반응 온도, 운반 기체 공급 속도 그리고 전구체인 수계 $SiO_2$ 졸의 농도를 조절하였다. 합성된 $SiO_2$ 입자는 공통적으로 반비정질상, 구 형태의 매끄러운 표면을 나타내었다. 구형 $SiO_2$ 입자의 크기는 반응 온도가 증가 또는 전구체 농도가 감소함에 따라 감소하였다. 또한 운반 기체 공급 속도가 증가할수록 합성된 $SiO_2$ 입자의 크기는 증가하였다. 스케일업 규모와 실험실 규모의 초음파 분무 열분해 공정의 차이점을 비교하였고, 반응관 내부 체류시간이 상대적으로 짧은 실험실 규모의 초음파 분무 열분해 공정에서 합성된 $SiO_2$ 입자가 상대적으로 큰 입도를 나타내었다.
영구자석용 $Sm_2$$Fe_{17}$$N_{x}$계 분말재료를 합성하기 위하여 유성형 볼밀장치를 사용한 Mechanochemical reaction 반응법을 적용하였다. 볼밀처리시 출발원료로서 금속 Sm과 Fe분말을 사용하고 고상반응을 통한 경질자성상 $Sm_2$$Fe_{17}$$N_{x}$의 형성과정을 조사하였다. 출발원료 $Sm_2$$Fe_{100-x}$(x = 11, 13, 15)의 모든 조성에서 볼밀처리만을 행하였을 경우 Sm-Fe계 비정질상 및 $\alpha$-Fe의 혼합상 분말을 얻을 수 있었다. 또한 볼밀처리된 분말시료의 열처리를 통하여 최종 생성상에 미치는 출발원료의 조성의존성을 조사한 결과, $Sm_{15}Fe_{85}$ 조성에서 거의 단상의 $Sm_2$$Fe_{17}$ 화합물이 생성됨을 알 수 있었다. $Sm_2$$Fe_{17}$으로부터 경질자성상인 $Sm_2$$Fe_{17}$$N_{x}$ 화합물을 생성시키기 위하여 $450^{\circ}C$, $N_2$가스분위기에서 질화열처리를 실시하였다. 분말시료에 흡수된 질소량은 질화 처리 초기에 급격히 증가한 후 서서히 포화되었으며 이에 따라 보자력 및 잔류자화가 크게 증가하는 것을 알 수 있었다. 본 연구에서 얻어진 Sm-Fe-N계 분말재료는 차세대 고성능 영구자석을 제조할 수 있는 원료분말로서 그 응용이 기대된다.
미생물에 의해 생산된 셀룰로오스는 고등식물을 이루고 있는 셀룰로오스보다 순수한 형태로 존재하고 굵기가 20~50 nm인 fibril이 높은 배향성과 결정성으로 3차원적 망상구조를 이루고 있다. 이러한 미생물 셀룰로오스를 이용한 탄화과정의 적용은 기존의 PAN, Pitch, 재생 셀룰로오스(Rayon)를 사용한 탄소 섬유의 제조에서 얻지 못하는 섬유 구조 탄소 물질의 대량 생산을 가능하게 하고 탄화과정에 의해 생산된 섬유 구조의 탄화 셀룰로오스는 높은 결정성과 배향성을 갖는 나노 영역의 흑연 결정상의 섬유 제조를 가능하게 할 것이다. 탄화에 사용되는 셀룰로오스의 생산성에 대하여 세 가지 균주들에서 생산된 셀룰로오스의 양을 비교하여 G. xylinus ATCC 11142가 15mL 배지당 건조 질량 0.066 g의 셀룰로오스를 생산하는 것을 확인하였고 셀룰로오스의 탄화과정에서 셀룰로오스의 열분해에 의해 생산된 타르(tar)에 의해 탄화 후, 셀룰로오스 탄화물의 섬유 구조를 저해시키는 문제점이 존재한다. 이러한 문제를 해결하기 위하여 탄소 나노튜브의 정제과정에서 연구된 액상, 기상 그리고 초음파 처리를 통한 정제방법들을 적용하여, 탄화 셀룰로오스에서는 초음파 처리를 통한 정제과정의 적용이 셀룰로오스 탄화물에서 섬유 구조가 증가하는 결과를 나타냈다.
본 연구에서는 열 화학기상증착법(thermal chemical vapor deposition)을 이용하여 분말 형태의 규소(Si)와 염화니켈 수화물 $(NiCl_2{\cdot}6H_2O)$을 혼합한 후 탄소공급원인 $CH_4$ 가스를 주입하여 탄화규소 나노선(SiC nanowire)을 합성하였다. 합성 온도와 $CH_4$ 가스 유량 변화에 따른 탄화규소 나노선의 구조적 특성을 분석한 결과, 합성온도가 $1,400^{\circ}C$, $CH_4$ 가스의 유량이 300 sccm인 경우가 탄화규소 나노선의 합성에 최적화된 조건임을 라만 분광법(Raman spectroscopy)과 X-선 회절(X-ray diffraction), 주사전자현미경(scanning electron microscopy), 그리고 투과전자현미경(transmission electron microscopy) 분석을 통해 확인하였다. 합성된 탄화규소 나노선의 직경은 약 50~150 nm이며, 곧은 방향성과 높은 결정성을 가지는 입방구조(cubic structure)를 지니고 있었다.
Thin films synthesized by plasma processes have been widely applied in a variety of industrial sectors. The structure control of thin film is one of prime factor in most of these applications. It is well known that the structure of this film is closely associated with plasma parameters and species of plasma which are electrons, ions, radical and neutrals in plasma processes. However the precise control of structure by plasma process is still limited due to inherent complexity, reproducibility and control problems in practical implementation of plasma processing. Therefore the study on the fundamental physical properties that govern the plasmas becomes more crucial for molecular scale control of film structure and corresponding properties for new generation nano scale film materials development and application. The thin films are formed through nucleation and growth stages during thin film depostion. Such stages involve adsorption, surface diffusion, chemical binding and other atomic processes at surfaces. This requires identification, determination and quantification of the surface activity of the species in the plasma. Specifically, the ions and neutrals have kinetic energies ranging from ~ thermal up to tens of eV, which are generated by electron impact of the polyatomic precursor, gas phase reaction, and interactions with the substrate and reactor walls. The present work highlights these aspects for the controlled and low-temperature plasma enhanced chemical vapour disposition (PECVD) of Si-based films like crystalline Si (c-Si), Si-quantum dot, and sputtered crystalline C by the design and control of radicals, plasmas and the deposition energy. Additionally, there is growing demand on the low-temperature deposition process with low hydrogen content by PECVD. The deposition temperature can be reduced significantly by utilizing alternative plasma concepts to lower the reaction activation energy. Evolution in this area continues and has recently produced solutions by increasing the plasma excitation frequency from radio frequency to ultra high frequency (UHF) and in the range of microwave. In this sense, the necessity of dedicated experimental studies, diagnostics and computer modelling of process plasmas to quantify the effect of the unique chemistry and structure of the growing film by radical and plasma control is realized. Different low-temperature PECVD processes using RF, UHF, and RF/UHF hybrid plasmas along with magnetron sputtering plasmas are investigated using numerous diagnostics and film analysis tools. The broad outlook of this work also outlines some of the 'Grand Scientific Challenges' to which significant contributions from plasma nanoscience-related research can be foreseen.
A psychrotrophic bacterial strain, Pseudomonas fluorescens BM07, synthesized unsaturated fatty acids (UFA) from fructose in response to lowering of growth temperature, and incorporated them into both polyhydroxyalkanoic acid (PHA) and membrane lipid. The blocking of PHA synthesis by adding 5 mM 2-bromooctanoic acid to the growth medium, containing 70 mM fructose, was found to be a useful means to profile the composition of membrane lipid by gas chromatography. As the growth temperature changed from 35 to $50^{\circ}C$, the total content of two UFA, 3-hydroxy-cis-5dodecenoic acid ($C_{12:1}$) and 3-hydroxy-cis-7-tetradecenoic acid ($C_{14:1}$), in PHA increased from 31 to 44 $mol\%$. The growth at lower temperatures also led to an increase in the level of two major UFA, palmitoleic acid (C16:1 cis9) and cis-vaccenic acid (C18:1 cis11), in membrane lipid. A fraction of these membrane-lipid UFA was converted to their corresponding cyclopropane fatty acids (CFA). The CFA conversion was a function of culture time, exhibiting biphasic increase before and after entering the stationary phase. However, pH changes in growth media had no effect on the CFA conversion, which is contrary to the case of E. coli reported. The cells grown at $30^{\circ}C$ responded to a cold shock (lowering the medium temperature down to $10^{\circ}C$) by increasing the level of C16:1 cis9 and C 18: I cis II up to that of $10^{\circ}C$-grown control cells and concomitantly decreasing the relative level of cis-9,10methylenehexadecanoic acid (the CFA converted from C16:1 cis9) from 14 to 8 $mol\%$, whereas the 10-grown cells exhibited little change in the lipid composition when exposed to a warmer environment of $30^{\circ}C$ for 12 h. Based on this one- way response, we suggest that this psychrotrophic strain responds more efficiently and sensitively to a cold shock than to a hot shock. It is also suggested that BM07 strain is a good producer of two unsaturated 3-hydroxyacids, $C_{12:1}\;and\;C_{141:1}$.
The $Ph{\acute{e}}bus$ FP project is an international reactor safety project. Its main objective is to study the release, transport and retention of fission products in a severe accident of a light water reactor (LWR). The FPT4 test was performed with a fuel debris bed geometry, to look at late phase core degradation and the releases of low volatile fission products and actinides. Post Test Analyses results indicate that releases of noble gases (Xe, Kr) and high-volatile fission products (Cs, I) were nearly complete and comparable to those obtained during $Ph{\acute{e}}bus$ tests performed with a fuel bundle geometry (FPT1, FPT2). Volatile fission products such as Mo, Te, Rb, Sb were released significantly as in previous tests. Ba integral release was greater than that observed during FPT1. Release of Ru was comparable to that observed during FPT1 and FPT2. As in other $Ph{\acute{e}}bus$ tests, the Ru distribution suggests Ru volatilization followed by fast redeposition in the fuelled section. The similar release fraction for all lanthanides and fuel elements suggests the released fuel particles deposited onto the plenum surfaces. A blockage by molten material induced a steam by-pass which may explain some of the low releases. The revaporisation testing under different atmospheres (pure steam, $H_2/N_2$ and steam /$H_2$) and up to $1000^{\circ}C$ was performed on samples from the first upper plenum. These showed high releases of Cs for all the atmospheres tested. However, different kinetics of revaporisation were observed depending on the gas composition and temperature. Besides Cs, significant revaporisations of other elements were observed: e.g. Ag under reducing conditions, Cd and Sn in steam-containing atmospheres. Revaporisation of small amounts of fuel was also observed in pure steam atmosphere.
Vinyl chloride monomer exists as gas phase at normal temperature and reacts with oxygen and strong oxidant in the air to form oxidized materials. Because of being easily synthesized, it is used as a main source at the synthetic reaction process of PVC synthesis factories. Ministry of Labor regulates its usage as a carcinogen and its exposure level as 1 ppm. But the amount of VCM production in PVC and VCM production process hasn't been exactly estimated. In addition, facilities of this factory are located in outdoor. Therefore, this study was designed to investigate effects of temperature on breakthrough of charcoal tube at a fixed concentration and temperature during VCM sampling based on NIOSH and OSHA methods which were used as methods of occupational environment measuring and analysis. During the sampling of VCM, methods of OSHA and NIOSH require flow rate of 0.05 lpm and sampling volume of $3{\ell}$, $5{\ell}$ respectively, at this time carbon molecular sieve tube and coconut shell charcoal tube are used to observe the breakthrough along with concentration and temperature. As a result, significant difference between average adsorbed amounts of OSHA methods but that of NIOSH methods cannot be found. NIOSH method is likely to be effected by high temperature and normal temperature in high concentration. Breakthrough is not found in the method of OSHA at different conditions of temperature and concentration. As the result of this study we could verify that breakthrough occurred in the process of sampling VCM with NIOSH methods. Therefor in summer time, breakthrough should be considered and research on the breakthrough volume should be done. It is considered the research about the specificity of the coconut shell charcoal and carbon molecular sieve sorbent should be done when sampling VCM in comming days.
원재료로서 Si, NH$_4$Cl, NaN$_3$, NaCl을 사용하고 SHS법을 이용하여 $\alpha$-Si$_3$N$_4$ 분말을 제조하였다. NH$_4$Cl과 NaN$_3$는 첨가제로서, NaCl은 희석제로서 사용되었고 반응기내 최초 $N_2$ 압력은 60 atm이었다. $\alpha$-Si$_3$N$_4$분말을 제조함에 있어, 첨가제의 종류와 조성, 희석제의 첨가량에 따른 반응성 및 생성물의 특성을 조사하였는데, 우선 $\alpha$-Si$_3$N$_4$ 분말의 제조를 위한 최적의 반응계를 조사하였고, 최적의 반응계에서 최적의 조성을 확립하였다. 최적의 반응계는 Si-$N_2$-additive(NH$_4$C+NaN$_3$)-diluent(NaCl)이었고, 이때 최적의 조성은 38wt%Si+22.5wt%NH$_4$Cl+27.5wt%NaN$_3$+l2wt%NaCl이었다. 이 조건에서 생성된 최고 $\alpha$-Si$_3$N$_4$의 분율은 96.5wt%이었으며 생성된 분말의 입형은 길이가 약 10 $mu extrm{m}$이고 직경이 약 1 $\mu\textrm{m}$인 일방향으로 길게 성장한 부정형의 fiber 형태였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.