• Culinary science and hospitality research
• /
• v.19 no.3
• /
• pp.105-115
• /
• 2013

Maillard reaction flavors had been tried by using krill hydrolysate and precursors in order to develop Teriyaki sauce with the reaction flavors. Also, the study for applying krill to Teriyaki sauce had been tried by using krill instead of eel bones. To make boiled-type and grilled-type reaction flavors, krill hydrolysate was used with other precursors such as serine, glucose and glucosamine. In the dynamic analysis of headspace volatile compounds, 20 mL reaction flavor was analyzed by the combined system of purge & trap, automatic desorber, gas chromatography and mass selective detector. Three kinds of Teriyaki sauce were developed with reaction flavor, krill and eel bones, and their products were evaluated by 10 items of cooked vegetables, cooked potatoes, boiled shrimp, grilled shrimp, fishy smell, pungent aroma, burned smell, sweety aroma, chemical smell, mud smell and preference. In the results of headspace analysis, 35 and 33 volatile compounds were identified from grilled-type and boiled-type reaction flavors. Grilled-type had sulfur-containing, aliphatic compounds, alcohols, ketones, pyrazines, and other aromatic compounds, and grilled-type had aldehydes, furans, other nitrogen-containing compounds. In the sensory evaluation of Teriyaki sauce, the items of roasted shrimp and sweety aroma showed significant differences for grilled-type application to Teriyaki sauce. The above results show the possible application of grilled-type reaction flavor to Teriyaki sauce.

• Journal of the Korean Magnetics Society
• /
• v.7 no.5
• /
• pp.237-242
• /
• 1997

The microstructure and soft magnetic properties of as-deposited Fe-Hf-O thin film alloys, which are produced at $P_{O2}=10%$ by rf magnetron sputtering method in $Ar+O_2$ mixed gas atmosphere, is investigated. Newly developed $Fe_{82}Hf_{3.4}O_{14.6}$ film exhibits good soft magnetic properties with $4{\pi}M_s=17.7$ kG, $H_c=0.7$ Oe and ${\mu}_{eff}$(0.5~100MHz)=2,500, respectively. The Fe-Hf-O films are composed of $\alpha$-Fe nanograins and amorphous phase with larger amounts of Hf and O elements which chemically combine each other. With increasing Hf area fraction, Hf and O contents increased proportionally. It was considered that O content in films was determined by Hf contents, because O was chemically combined with Hf. It results from decreasing the $\alpha$-Fe grain size by precipitates (Hf and O), high electrical resistivity. The $Fe_{82}Hf_{3.4}O_{14.6}$ film exhibits the quality factor (Q=$\mu$'/$\mu$") of 25 at 20 MHz. These good frequency characteristics are considered to be superior to other films already reported.o other films already reported.

• Korean Journal of Food Science and Technology
• /
• v.21 no.5
• /
• pp.624-632
• /
• 1989

Lipids of Liza carinata roe were extracted and separated into detailed lipid classes by column chromatography. About 57-62% of the total lipids consisted of wax esters in which saturated and unsaturated fatty alcohols combined with fatty acids with up to six double bonds. Between the even-numbered wax ester peaks in gas-liquid chromatography, ones with odd chain lengths such as C31, C33 and C35 were eluted in appreciable amounts. Isomers composed of different fatty acids and alcohols at a given chain length were not resolved on 1.5% OV-17 column. The principal component of wax esters in sample A were C32, C34 and C30 (45.0%, 19.2%, and 12.2%), followed by C36 and C38 length (9.5% and 4.7%), while those in sample B were mainly occupied by C34, C32 and C36 length (36.3%, 31.4% and 14.5%) with minor components C30 and C38 length (5.2%, and 3.4%). The wax esters were not a random combination of constituent fatty acids and alcohols. With increase in boiling temperature the wax esters increased slightly in viscosity over the unboiled, showing a tendency toward randomness, and finally were completely randomized at $360^{\circ}C$ for 40 minutes. The enzymes involved in wax ester biosynthesis seemed to have high selectivity for chain length of fatty acids and alcohols.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.329-333
• /
• 2016

Disinfection by electrolysis would be useful for small wastewater treatment plant, combined sewer overflow, ballast water, swimming pool, and fish farming, where the transport, storage, and the use of chlorine gas is limited. This study investigated the feasibility of the electrolysis of dilute hydrochloric acid (HCl) for disinfection. The effects of HCl concentration, voltage and reaction time on the generation of oxidizing agents, HOCl, $O_3$, and $H_2O_2$, were examined in a series of batch test. The highest current efficiency was 99.3% which was found at 2.2%, 3 V, and 5 min of HCl concentration, voltage, and reaction time, respectively. Continuous electrolysis at 2.2% HCl, 3 V, and 5 min of the hydraulic retention time showed 97.4% of the current efficiency. Addition of sodium chloride up to 20 g/L linearly increased the oxidizing agents production. 92.2% of total coliforms were removed by the contact with the electrolyzed water.

• Analytical Science and Technology
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2011

We described an estimation of measurement uncertainty in quantitative analysis of 11-nor-9-carboxy-${\Delta}^9$-tetrahydrocannabinol (THC-COOH), the metabolite of ${\Delta}^9$-tetrahydrocannabinol, in hair samples by using the bead-assisted liquid-liquid extraction and gas chromatography-tandem mass spectrometric (GC-NCI-MS/MS) detection. Traceability of measurement was established through the use of reference materials, calibrated volumetric tubes, volume measuring devices, and measuring instruments. The analytical results were compared and the different contributions to the uncertainty were evaluated. Inter-day variation was performed by using statistical analysis of several indicative factors. Measurement uncertainty associated with the analyte in real forensic hair samples were estimated using QC data. The major factor of contribution to combined standard uncertainty was inter-day repeatability, while those associated with preparation of analytical standard and also sample of weight were insignificant considering the degree of contribution. Relative uncertainty of relative extended standard uncertainty divided into the measured concentration of the analyte was 17% in a hair sample. The uncertainty of result evaluation will be invaluable to improve quality of the analysis.

• Tunnel and Underground Space
• /
• v.27 no.3
• /
• pp.146-160
• /
• 2017

$CO_2$ sequestration for alleviating global warming is a hot issue in the world. In this study, TOUGH2 and FLAC3D were combined for analyzing the hyro-mechanical coupling behaviors expected in $CO_2$ sequestration and applied it to Sleipner project carried out in Norway. In the analysis, the influence of pore pressure on in situ stress was considered and the influence of caprock permeability on hydro-mechanical behaviors was analyzed. In the condition of constant injection rate, pressure and saturation at the injection well, liquid and gas saturation in rock, major and minor stress variations with time and distance from the injection well, and horizontal and vertical displacements after injection could be investigated. The major principal stress was quickly increased in the early stage and then slowly decreased to a stable value, which was higher than the initial value. In contrast, the minor principal stress returned to initial value after some increase in the early stage. Surface upheaval was steadily increased and it was up to 15mm in 2 years after injection. When the caprock's permeability was changed from $3e-15m^2{\sim}3e-18m^2$, it was found that the injection well pressure and surface upheaval were inversely propotional to the permeability.

• Journal of Trauma and Injury
• /
• v.21 no.1
• /
• pp.46-52
• /
• 2008

Purpose: This study was to evaluate the effect of arterial embolization on survival in patients with pelvic bone fractures and arterial bleeding. Methods: From January 2001 to December 2007, in all, 18 patients with pelvic bone fractures that had been treated with interventional arterial embolization were included in this retrospective study. The Injury Severity Score (ISS), the Revised Trauma Score (RTS), the initial hemodynamic status, the blood gas analysis, blood transfusion data, and mortality were the main outcome measurements. Results: Pelvic bone fractures were classified into lateral compression (LC), antero-posterior compression (APC), vertical shear (VS), and combined (CM) type according to the Young-Burgess classification. The Survivor group included 11 patients (61.1%), and the non-survivor group included 7 patients (38.9%). The mean ages for the survivor and the non-survivor groups were 40.0 and 45.6 years (p=0.517). The types of pelvic bone fractures were LC 11 (61.1%), APC 6 (33.3%), and VS 1 (5.6%): LC 7 (63.6%), and APC 4 (36.4%) in the survivor group and LC 4 (57.1%), APC 2 (28.6%), and VS 1 (14.3%) in the non-survivor group. The internal iliac artery was the predominant injured vessel among both the survivors (n = 5, 45.5%) and the non-survivors (n = 4, 57.1%). No differences in initial blood pressures, ISS, and RTS existed between the two groups, but the arterial pH was lower in the non-survivor group (pH 7.09 (${\pm}0.20$) vs 7.30 (${\pm}0.08$), p=0.018). The number of transfused 24-hour units of packed RBC was greater in the non-survivor group ($24.1{\pm}12.5$ vs $14.4{\pm}6.8$, p=0.046). Conclusion: No differences in initial blood pressure and trauma scores existed between survivors and non-survivors with pelvic bone fractures, who had been treated with arterial embolization, but arterial pH was lower the in non-survivors.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.1-6
• /
• 2002

How is the flow in a rotating impeller. About 35 years have passed since one experimentalist rotating with the impeller. of a huge centrifugal blower made the flow measurements using a hot-wire anemometer (Fowler 1968). Optical measurement methods have great advantages over the intrusive methods especially for the flow measurement in a rotating impeller. One is the optical flow visualization (FV) technique (Senoo, et al., 1968) and the other is the application of laser velocimetry (LV) (Hah and Krain, 1990). Particle image velocimetries (PIVs) combine major features of both FV and LV, and are very attractive due to the feasibility of simultaneous and multi-points measurements (Hayami and Aramaki, 1999). A high-pressure-ratio transonic centrifugal compressor with a low-solidity cascade diffuser was tested in a closed loop with HFC134a gas at 18,000rpm (Hayami, 2000). Two kinds of measurement techniques by image processing were applied to visualize a flow in the compressor. One is a velocity field measurement at the inducer of the impeller using a PIV and the other is a pressure field measurement on the side wall of the cascade diffuser using a pressure sensitive paint (PSP) measurement technique. The PIV was successfully applied for visualization of an unsteady behavior of a shock wave based on the instantaneous velocity field measurement (Hayami, et al., 2002b) as well as a phase-averaged velocity vector field with a shock wave over one blade pitch (Hayami, et al., 2002a. b). A violent change in pressure was successfully visualized using a PSP measurement during a surge condition even though there are still some problems to be overcome (Hayami, et al., 2002c). Both PIV and PSP results are discussed in comparison with those of laser-2-focus (L2F) velocimetry and those of semiconductor pressure sensors. Experimental fluid dynamics (EFDs) are still growing up more and more both in hardware and in software. On the other hand, computational fluid dynamics (CFDs) are very attractive to understand the details of flow. A secondary flow on the side wall of the cascade diffuser was visualized based either steady or unsteady CFD calculations (Bonaiuti, et al.,2002). EFD and CFD methods will be combined to a hybrid method being complementary to each other. Measurement techniques by image processing as well as CFD calculations give a huge amount of data. Then, data mining technique will become more important to understand the flow mechanism both for EFD and CFD.

• Korean Journal of Food Science and Technology
• /
• v.32 no.5
• /
• pp.1029-1034
• /
• 2000

A suitable method of sample treatments to minimize the analytical interferences was presented in order to determine bisphenols [bisphenol F (BPF), bisphenol A (BPA), bisphenol F diglycidyl ether (BFDGE), and bisphenol A diglycidyl ether (BADGE)] in various canned beverages coated with epoxy resin by the reversephase high performance liquid chromatography (RP-HPLC) equipped with a fluorescence detector and the gas chromatography with mass selective detection. The recovery test of bisphenols was performed using 1, 5, and 10 ${\mu}g/L$ bisphenols spiked beverages with the combined technique of the solid-phase extraction (SPE) and the liquid-phase extraction (LPE). Both BPA and BADGE showed quite adequate resolutions in HPLC-chromatograms. The recoveries of BPA obtained by LPE with diethyl ether were higher than those obtaind with methylene chloride on coffee, shikhye and fruit juice. For cola and tea, the recoveries of BPA obtaind by SPE were higher than those by LPE with diethyl ether. The recoveries of BADGE were less than those of BPA for all beverage samples treated by either SPE or LPE method. In survey of bisphenols for eighteen commercial canned beverage samples, BPA contents of coffee, cola, tea, shikhye, and fruit juice were in the range of $1.3{\sim}11.6,\;0.5{\sim}0.9,\;1.0{\sim}1.3,\;2.4{\sim}7.9$, and $3.0{\sim}3.4\;{\mu}g/L$, respectively, but there was no detection of BPA in beer sample.

• Animal Bioscience
• /
• v.34 no.4
• /
• pp.642-651
• /
• 2021

Objective: This study aimed to determine the effects of different roughages in total mixed ration (TMR) inoculated with or without coculture of Lactobacillus acidophilus (L. acidophilus) and Bacillus subtilis (B. subtilis) on in vitro rumen fermentation and microbial population. Methods: Three TMRs formulations composed of different forages were used and each TMR was grouped into two treatments: non-fermented TMR and fermented TMR (F-TMR) (inoculated with coculture of L. acidophilus and B. subtilis). After fermentation, the fermentation, chemical and microbial profile of the TMRs were determined. The treatments were used for in vitro rumen fermentation to determine total gas production, pH, ammonianitrogen (NH3-N), and volatile fatty acids (VFA). Microbial populations were determined by quantitative real-time polymerase chain reaction (PCR). All data were analyzed as a 3×2 factorial arrangement design using the MIXED procedure of Statistical Analysis Systems. Results: Changes in the fermentation (pH, lactate, acetate, propionate, and NH3-N) and chemical composition (moisture, crude protein, crude fiber, and ash) were observed. For in vitro rumen fermentation, lower rumen pH, higher acetate, propionate, and total VFA content were observed in the F-TMR group after 24 h incubation (p<0.05). F-TMR group had higher acetate concentration compared with the non-fermented group. Total VFA was highest (p<0.05) in F-TMR containing combined forage of domestic and imported source (F-CF) and F-TMR containing Italian ryegrass silage and corn silage (F-IRS-CS) than that of TMR diet containing oat, timothy, and alfalfa hay. The microbial population was not affected by the different TMR diets. Conclusion: The use of Italian ryegrass silage and corn silage, as well as the inoculation of coculture of L. acidophilus and B. subtilis, in the TMR caused changes in the pH, lactate and acetate concentrations, and chemical composition of experimental diets. In addition, F-TMR composed with Italian ryegrass silage and corn silage altered ruminal pH and VFA concentrations during in vitro rumen fermentation experiment.