• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.114-121
• /
• 2010

Portland cement production is under critical review due to high amount of CO2 gas released to the atmosphere. Attempts to increase the utilization of a by-products such as fly ash and ground granulated blast-furnace slag to partially replace the cement in concrete are gathering momentum. But most of by-products is currently dumped in landfills, thus creating a threat to the environment. Many researches on alkali-activated concrete that does not need the presence of cement as a binder have been carried out recently. However, most study deal only with alkali-activated ground granulated blast furnace slag or fly ash, as for the combined use of the both, little information is reported. In this study, we investigated the influence of mixture ratio of fly ash/ blast furnace slag tand curing condition on the flowability and compressive strength of mortar in oder to develop cementless alkali-activated concrete. In view of the results, we found out that the mixture ratio of fly ash/blast furnace slag always results to be significant factors. But the influence of curing temperature in the strength development of mortar is lower than the contribution due to other factors. At the age of 28days, the mixture 50% fly ash and 50% ground granulated blast furnace slag activated with 1:1 the mass ratio of 9M NaOH and sodium silicate, develop compressive strength of about 65 MPa under $20^{\circ}C$ curing.

• Environmental and Resource Economics Review
• /
• v.27 no.2
• /
• pp.261-286
• /
• 2018

This paper evaluated the economic feasibility of the life extension of Kori unit 1 and Wolsong unit 1 according to the types of the nuclear power plants (NPPs) and the life extension period comparing to the levelized costs of energy (LCOE) of the new NPPs, coal-fired plants (CFPs), and combined cycle gas turbine (CCGTs) which proposed in the $7^{th}$ Basic Plan for Electricity Supply and Demand. The economic feasibility of the life extension of NPPs using LCOE method is affected by the types of NPPs, lifetime extension periods, discount rate, and capacity factor. According to the analysis results, the pressurized light water reactor (PWR) is more economical than the pressurized heavy water reactor (PHWR). Comparing the economical efficiency between the life extension of NPPs and other alternatives, the operation of the PWR for 20 years is more economical than the one of new NPPs and CFPs. However, 20 years of life extension of PHWR is more economical than the CCGTs, but less economical than new NPPs and CFPs. In summary, the 20 years of life extension of the NPPs seems to be more, especially for the PWR, which is more cost effective than other generation alternatives. Therefore, the government policy of the life extension of NPPs need to be a selective approach that simultaneously considers both safety and economics rather than closing all NPPs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.695-701
• /
• 2018

Research into exhaust heat recovery has been actively carried out to improve the thermal efficiency of internal combustion engines. In this study, the performance of thermoelectric generation from exhaust heat recovery for motorcycle engines was analyzed by 1-D thermo-fluid simulation. GT-SUITE, which was developed by Gamma Tech., was used for the simulation of the internal combustion engine and thermoelectric generation system. The basic performance of the engine was analyzed in the range of engine speed of 1000~7000 rpm and engine load of 0~100%. The ratio of exhaust heat energy to fuel chemical energy was found to be about 40~60%. A combined simulation of the engine model and thermoelectric generation model was carried out to analyze the voltage, current and power generated by the thermoelectric material. The generation characteristics of the thermoelectric material was dominantly affected by the exhaust gas temperature. The maximum generated power of the current thermoelectric generation system was found to be about 2.2% of the total exhaust heat energy. The design optimization of the thermoelectric generation system will be carried out to maximize its power generation and economic feasibility.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.2
• /
• pp.79-87
• /
• 2016

Asian dust (Hwangsa) interacts with light, atmospheric gas, aerosol, and marine ecosystem, affecting Earth climate. Mineralogical properties are essential to understand the interaction between the dust and environments. In this study, we examined the mineralogical properties of Asian dust collected at Deokjeok Island, Incheon, Korea in February 22, 2015. X-ray diffraction (XRD) analyses showed that phyllosilicate minerals (62 wt%) dominate the Asian dust. Illite-smectite series clay minerals (55%) were common with minor chlorite (5%) and kaolinite (2%). Non-phyllosilicate minerals were quartz (18%), plagioclase (10%), K-feldspar (4%), calcite (4%), and gypsum (1%). Similar results were obtained by mineral quantification using scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). Transmission electron microscopy combined with EDS confirmed illite-smectite series clay minerals as the dominant phyllosilicate type. Morphological analyses using SEM showed clay agglomerates, clay-coated quartz, feldspars, and micas. Gypsum grains were common on the particle surface, while calcite nanofibers, previously reported as common on the surface, were rare, indicating the reaction of calcite and acidic atmospheric pollutants to form gypsum. The analytical result of 2015 Asian dust would contribute to the establishment of mineralogical base for the modeling of the interaction between Asian dust and environments.

• Journal of Gastric Cancer
• /
• v.13 no.3
• /
• pp.179-184
• /
• 2013

Purpose: Postoperative pancreatic fistula is a dreadful complication after gastric cancer surgery. The purpose of this study is to evaluate the actual incidence and risk factors of postoperative pancreatic fistula after curative gastrectomy for gastric cancer. Materials and Methods: A total of 900 patients who underwent gastrectomy for gastric cancer (laparoscopic gastrectomy, 594 patients; open gastrectomy 306 patients) were enrolled between January 2009 and December 2010. Clinical outcomes, including postoperative pancreatic fistula grade based on the International Study Group on Pancreatic Fistula, were investigated. Results: Overall, the postoperative pancreatic fistula rate was 3.3% (30/900) (1.5% in laparoscopic gastrectomy versus 6.9% in open gastrectomy, P<0.001). Patients who underwent D2 lymphadenectomy, total gastrectomy, splenectomy or distal pancreatectomy showed higher postoperative pancreatic fistula rates (4.7%, 13.8%, 13.6%, or 57.1%, respectively, P<0.001). Patients with postoperative pancreatic fistula had higher morbidity (46.7% versus 13.1%, P<0.001), delayed gas out (4.9 days versus 3.8 days, P<0.001), belated diet start (5.8 days versus 3.5 days, P<0.001) and longer postoperative hospital stay (13.7 days versus 6.8 days, P<0.001). On the multivariate analysis, total gastrectomy (odds ratio 9.751, 95% confidence interval: 3.348 to 28.397, P<0.001), distal pancreatectomy (odds ratio 7.637, 95% confidence interval: 1.668 to 34.961, P=0.009) and open gastrectomy (odds ratio 2.934, 95% confidence interval: 1.100 to 7.826, P=0.032) were the independent risk factors of postoperative pancreatic fistula. Conclusions: Laparoscopic gastrectomy had an advantage over open gastrectomy in terms of the lower postoperative pancreatic fistula rate. Total gastrectomy and combined resection, such as distal pancreatectomy, should be performed carefully to minimize postoperative pancreatic fistula in gastric cancer surgery.

• Korean journal of applied entomology
• /
• v.56 no.3
• /
• pp.253-259
• /
• 2017

Fumigation using chlorine dioxide ($ClO_2$) has been regarded as a potential control technique against stored grain insect pests. The control efficacy can be enhanced with increase of opening rates of spiracles by facilitating the toxic gas delivery to internal body. To test this hypothesis, this study used the Indianmeal moth, Plodia interpunctella, which was known to be susceptible to $ClO_2$, and analyzed the opening rate of spiracles. A total of 9 pairs of spiracles were observed in P. interpunctella larvae, in which one pair was located on the prothorax and eight pairs were on the abdomen. Within the body, the spiracles were connected to longitudinal and transverse tracheal trunks. The open spiracles were determined by the dye-infiltration method. Based on this method, the opening rate of spiracles increased up to about 60% with increase of ambient temperatures. Furthermore, exposure to carbon dioxide stimulated the opening rate of spiracles up to about 95%. In contrast, exposure to $ClO_2$ prevented the spiracle opening and resulted in only 25% of spiracles in an opening state. The addition of carbon dioxide to $ClO_2$ treatment rescued the opening rate of spiracles as much as the carbon dioxide single treatment. Based on this modulatory activity of carbon dioxide against spiracles, the combined treatment of $ClO_2$ with carbon dioxide resulted in significant increase of its toxicity against P. interpunctella compared to a single $ClO_2$ treatment.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.3
• /
• pp.18-31
• /
• 2002

In this study, we introduce a concept of advanced neurofuzzy polynomial networks(ANFPN), a hybrid modeling architecture combining neurofuzzy networks(NFN) and polynomial neural networks(PNN). These networks are highly nonlinear rule-based models. The development of the ANFPN dwells on the technologies of Computational Intelligence(Cl), namely fuzzy sets, neural networks and genetic algorithms. NFN contributes to the formation of the premise part of the rule-based structure of the ANFPN. The consequence part of the ANFPN is designed using PNN. At the premise part of the ANFPN, NFN uses both the simplified fuzzy inference and error back-propagation learning rule. The parameters of the membership functions, learning rates and momentum coefficients are adjusted with the use of genetic optimization. As the consequence structure of ANFPN, PNN is a flexible network architecture whose structure(topology) is developed through learning. In particular, the number of layers and nodes of the PNN are not fixed in advance but is generated in a dynamic way. In this study, we introduce two kinds of ANFPN architectures, namely the basic and the modified one. Here the basic and the modified architecture depend on the number of input variables and the order of polynomial in each layer of PNN structure. Owing to the specific features of two combined architectures, it is possible to consider the nonlinear characteristics of process system and to obtain the better output performance with superb predictive ability. The availability and feasibility of the ANFPN are discussed and illustrated with the aid of two representative numerical examples. The results show that the proposed ANFPN can produce the model with higher accuracy and predictive ability than any other method presented previously.

• Communications of Mathematical Education
• /
• v.25 no.3
• /
• pp.497-524
• /
• 2011

This study was to understand students' learning about the function of math combined with molecular motions of science using the block scheduling. It was based on the revised Class Structure Model of Lee et al.(2010) where MBL as a tool was used to increase students' participation and understanding in the integrated concepts. The researcher provided the 6th grade students who lived in Sung Nam-Si, Kyung Gi-Do with 8 unit lessons, consisting of 5 stages of CSM. As a result of the study, the integrated education of Mathematics and Science showed synergic effect in studying both subjects and brought a positive result in gradual mathematization. It may be hard to combine all the contents of mathematics and science together. However, learning the relation between volume and pressure, and between volume and temperature of gas used as an example of function shown in our daily life was appropriate through Fogarty's integrated education model because it supported the objective of both subjects. Also, it was a good idea to develop CSM because it was composed of the contents from both subjects held in the same period of a year. Through the five stages, students were able to establish and generalize the definitions and the concepts of function.

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.827-833
• /
• 1996

Along with the increased necessity for an efficient utilization of Korean wild edible plants growing in fields and mountains, attempts were made to investigate the patterns of flavor changes accompanied hy various conditions of dispersion medium. The effect of various pH values and concentration of sucrose or NaCl of dispersion medium on volatile flavor patterns was investigated to evaluate the applicability of flavor components extracted from Capsella bursa-pastoris for food industry. Essential oils from this wild plant were isolated by simultaneous steam distillation-extraction (SDE) method using diethyl ether as solvent. Concentrated samples were analyzed s chromatography (GC) and combined gas chromatography-mass spectrometry (GC-MS). Most volatile flavor components of Capsella bursa-pastoris showed good recovery when steam distilled at pH 7 by SDE method. Increasing concentration of sucrose and 15% by NaCl, resulted in greater numbers of identified flavor components from Capsella bursa-pastoris.

• Clean Technology
• /
• v.13 no.4
• /
• pp.266-273
• /
• 2007

The adsorption properties of the activated carbon-based adsorbents were studied to remove COS emitted from $SO_2$ catalytic reduction process on the integrated gasification combined cycle (IGCC) system in this work. Transition metal supported catalysts and mixed metal oxide catalysts were used for the $SO_2$ catalytic reduction. The mechanism of COS produced from the $SO_2$ reduction and the COS concentration s according to the reaction temperature were investigated. In this study, an activated carbon and a modified activated carbon doped with KOH were used to remove the very low concentration of COS effectively. The adsorption rate and the breakthrough time of COS were measured by a thermo gravity analyzer (TGA, Cahn Balance) and a fixed bed flow reactor equipped with GC-pulsed flammable photometric detector (PFPD), respectively. It was confirmed that the COS breakthrough time of the activated carbon doped with KOH was longer than that of an activated carbon. In conclusion, the modified-activated carbon having a high surface area showed a high adsorption rate of COS produced from the $SO_2$ reduction.