• 한국재료학회지
• /
• 제32권1호
• /
• pp.36-43
• /
• 2022

Breakthrough analysis has widely been explored for the dynamic separation of gaseous mixtures in porous materials. In general, breakthrough experiments measure the components of a flowing gas when a gaseous mixture is injected into a column filled with an adsorbent material. In this paper, we report on the design and fabrication of a breakthrough curve measurement device to study the dynamic adsorptive separation of hydrogen isotopologues in porous materials. Using the designed system, an experiment was conducted involving a 1:1 mixture of hydrogen and deuterium passed through a column filled with zeolite 13X (1 g). At room temperature, both hydrogen and deuterium were adsorbed in negligible amounts; however, at a temperature of 77 K, deuterium was preferentially adsorbed over hydrogen. The selectivity was different from that in the existing literature due to the different sample shapes, measurement methods, and column structures, but was at a similar level to that of cryogenic distillation (1.5).

• Journal of Korean Society for Atmospheric Environment
• /
• 제18권E1호
• /
• pp.29-36
• /
• 2002

The selective catalytic reduction (SCR) reaction of promoter catalysts was investigated in this study. A pure anatase type of TiO$_2$ was used as support. Activation measurement of prepared catalysts was practiced on a fixed reactor packing by the glass bead after filling up catalysts in 1/4 inch stainless tube. The reaction temperature was measured by K-type thermocouple and catalyst was heated by electric furnace. The standard compositions of the simulated flue gas mixture in this study were as follows: NO 1,780ppm, NH$_3$1,780ppm, $O_2$1% and $N_2$ as balance gas. In this study, gas analyzer was used to measure the outgassing gas. Catalyst bed was handled for 1hr at 45$0^{\circ}C$, and the reactivity of the various catalyst was determined in a wide temperature range. Conversion of NH$_3$/NO ratio and of $O_2$ concentration was practiced at 1,1.5 and 2, respectively. The respective space velocity were as follows . 10,000, 15,000 and 17,000 hr-1. It was found that the maximum conversion temperature range was in a 5$0^{\circ}C$. It was also found toi be very sensitive at space velocity, $O_2$ concentration, and NH$_3$/NO ratio. We also noticed that the maximum conversion temperature of (W, Mo, Sn) -V$_2$O$_{5}$/TiO$_2$ catalysts was broad. Specially WO$_3$-V$_2$O$_{5}$TiO$_2$2 catalyst appeared nearly 100% conversion at not only above 30$0^{\circ}C$ ut also below 25$0^{\circ}C$. At over 30$0^{\circ}C$, NH$_3$ oxidation decreased with decrease of surface excess oxygen. In addition, WO$_3$-V$_2$O$_{5}$TiO$_2$ catalyst did not appear to affect space velocity, $O_2$ concentration, and NH$_3$/NO ratio.ratio.

• 한국추진공학회지
• /
• 제21권3호
• /
• pp.91-100
• /
• 2017

복합화력 발전소의 가스터빈 정비 의사 결정을 지원하기 위한 솔루션을 개발하였다. 대상 엔진은 군산 복합화력 발전소에서 사용하고 있는 MHI 501G 가스터빈이다. 개발된 솔루션은 다음과 같은 모듈들을 통해 최적의 정비주기 계산 결과를 제공해주며, 각 모듈에는 실시간 성능 감시, 모델기반 성능진단, 성능 경향분석, 최적 오버홀 정비주기 예측, 압축기 최적 세정주기 관리, BPT (Blade Path Temperature) 분석 기능이 포함되어 있다. 모델 기반 성능진단은 실시간으로 계측되는 성능 파라미터 데이터와 가스터빈 시뮬레이션 결과를 비교하여 그 차이를 분석하여 진단을 수행한다. 압축기 세정주기 분석은 압축기 성능과 정비비용 사이의 최적 점을 제시한다.

• 전기화학회지
• /
• 제6권3호
• /
• pp.212-216
• /
• 2003

고분자전해질형 연료전지에 사용되는 외부 및 내부 가습기를 통과한 반응 기체의 상대습도와 온도를 측정한 자료가 실시간으로 컴퓨터에 입력되어지는 시스템을 자체적으로 구성하였다. 이 시스템을 이용하여 측정한 경우 10-20분이 경과한 후에 습도 값이 안정되었으므로 가습 측정치에 대한 신뢰성을 향상시킬 수 있었으며, 여러 가지 가습의 영향을 해석할 수 있었다. 측정 장비의 이상을 초래할 수 있는 상대 습도가 $100\%$부근의 영역에서 지속적으로 측정을 수행할 경우 센서의 오작동 내지 고장의 원인이 될 수 있었으므로 실험시 주의가 필요하였다. 가습기를 통과한 반응기체는 유량이 증가할수록 가습되는 양은 증가하나, 일정 유량 이상이 되면 그 증가폭이 감소하는 경향을 보였는데 이는 가습기 출 통과하는 기체의 체류 시간 영향에 기인한 것으로 추정되어진다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권3호
• /
• pp.107-118
• /
• 1986

The presenet research attempts to examine the combustion characteristics and the structure of the flame in turbulent premixed flames and thus enhance the combustion performance that leads to the design of the effective combustion system (untilizing LNG). Following experimental investigations for several stabilized premixed flames were attempted to identify the interactive mechanism between flame structures and flow fields; Visualization by Schlieren method, measurement of flow velocity by LDV, detection of ion current by ion probe, measurement of fluctuating temperature by thermocouple having compensation circuit, average values with respect to time of fluctuating amount for flow velocity, temperature, ion current, etc., variable RMS values, PDFs, autocorrelation, crosscorrelation, spatial macroscale, power spectra, and velocity scale. Continuing the authors published studies whose flame dominated by coherent structures and the characteristics of combustion reaction for irregular three dimensional flame and stabilized flame by step were investigated with obtained experimental quantities. Results of this research are following : The most turbulent flames support the structure of a Wrinkled laminar flame or laminar flamelets. It also observed that combustion reaction is related to small tubulence microscales of the turbulent flow fields closly.

• 대한기계학회논문집B
• /
• 제22권5호
• /
• pp.563-572
• /
• 1998

An experimental study of hot filament chemical vapor deposition(HFCVD) has been carried out for the fabrication of diamond thin film. Of particular interest is the measurement of deposition uniformity on large substrates. Experimental apparatus including a vacuum chamber, heating elements, etc. has been designed and manufactured. Deposition profiles for different pretreatment powders and different flow rates have been measured in conjunction with the measurement of substrate temperature distribution on a large substrate surface. As the flow rate increases, deposition rate increases, however, the crystallinity becomes worse. Higher growth rate has been found on the region closer to the center location where substrate temperature is higher. The crystallinity has been improved as gas flow rate decreases. The growth rate and morphology of deposition were identified by SEM and the existence of diamond phase was proved by Raman spectroscopy.

• Nuclear Engineering and Technology
• /
• 제32권5호
• /
• pp.521-529
• /
• 2000

A modified interfacial heat transfer correlation between a dispersed water droplet and ambient superheated steam is proposed and compared with available experimental data and other correlations. Modified one overcomes the inherent deficiencies of Lee and Ryley's interfacial heat transfer correlation that ignored the effects of steam superheating which can not be neglected especially in the reflood situation of a loss-of-coolant accident. Modified one is represented by (equation omitted) In the present correlation the effect of possible subcooling of a water droplet is not taken into consideration. Comparison of the above correlation with currently available measurement data for a water droplet in high temperature gas flow shows that the proposed one correlates well with the measurement data where the degree of superheating is negligible and considerable.

• 항공우주기술
• /
• 제6권2호
• /
• pp.29-34
• /
• 2007

본 논문에서는 엔진고공환경 시험설비의 엔진 입구 덕트에서 측정한 전압력과 전온도를를 통해 실시간으로 공기유량을 계산하고, 압력프로파일을 이용하여 경계층 레이크를 장착하지 않았을 경우에도 공기유량을 예측할 수 있는 방법을 기술하였다. 또한, 엔진입구배관에 걸친 덕트 연결부를 통한 압력손실을 예측하고, 이를 통해 공기유량을 보정함으로써, 고공환경시험설비에서의 공기유량측정의 신뢰도를 향상시키고 설비유지측면에서 운용성을 보고자 하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.259-262
• /
• 2005

Image retention is a kind of fatal shortcoming of the AC PDPs for realizing high-quality picture. In this work, the measurement method of image retention was proposed using temporal measurement of luminance, CIEXYZ tristimulus values, IR emission of reset pulse, and temperaturel. On the base of temporal measurement of luminance, CIEXYZ tristimulus value, and IR emission of reset pulse, the retention time of Ne+5%Xe gas-mixture discharge was about 2 hours after white window image. However, it was about 20 minute on the base of temporal measurement of temperature.

• 한국가스학회지
• /
• 제20권5호
• /
• pp.1-8
• /
• 2016

최소자연발화온도는 가연성물질이 주위의 열에 의해 스스로 발화하는 최저온도이다. 최소자연발화온도는 유기혼합물중 가연성 액체혼합물의 안전한 취급을 위해서 중요한 지표가 된다. 본 연구에서는 ASTM E659 장치를 이용하여 가연성 혼합물인 n-butanol+p-xylene 혼합물의 최소자연발화온도를 측정하였다. 2성분계를 구성하는 순수물질인 n-butanol과 p-xylene의 최소자연발화온도는 각 각 $340^{\circ}C$, $557^{\circ}C$로 측정되었다. 그리고 측정된 n-butanol+p-xylene 혼합물의 최소자연발화온도는 제시된 식에 의한 예측값과 적은 평균절대오차에서 일치하였다.