• 한국대기환경학회지
• /
• 제32권3호
• /
• pp.280-288
• /
• 2016

Greenhouse gas (GHG) emissions have given rise to climate change which is one of the most serious environmental challenges that the world faces today. In response, Republic of Korea has proposed "Low Carbon, Green Growth" as a new economic paradigm accompanying with the ultimate aim of building a sense of responsibility for the environment. Korean government has set the ambitious national GHG emission reduction target which aims 37% reduction in the business-as-usual (BAU) level of 2030. The transportation sector plays a key role in this target. In the transportation sector, the GHG reduction target of 34.3% in the BAU level by 2020 has been allocated in order to consider the industrial specificity. Furthermore, it is known that the GHG reduction in the transportation sector has relatively minimal side effects compared to those of other sectors. In order to meet this national GHG reduction target, Korean government has set $CO_2$ emission regulation of vehicle for 2020. The purpose of this study is to evaluate the reduction effects by the average GHG regulation of vehicles. $CO_2$ emissions, between 2009 and 2013 were analysed by reduction measure such as technology improvement, light-weight, segment shift, diesel vehicle sales. During this period, $CO_2$ of vehicle was reduced every year by 19.9 g/km (i.e., 3.3% reduction per year). $CO_2$ reduction of imported vehicle is greater than domestic vehicle because of segment shift toward small size vehicle and higher diesel vehicle sales.

• 한국재료학회지
• /
• 제21권9호
• /
• pp.509-514
• /
• 2011

In this study, optical emission spectroscopy was used to monitor the plasma produced during the RF magnetron sputtering of a $BaTiO_3$ target. The intensities of chemical species were measured by real time monitoring with various discharge parameters such as RF power, pressure, and discharge gas. The emission lines of elemental and ionized species from $BaTiO_3$ and Ti targets were analyzed to evaluate the film composition and the optimized growth conditions for $BaTiO_3$ films. The emissions from Ar(I, II), Ba(I, II) and Ti(I) were found during sputtering of the $BaTiO_3$ target in Ar atmosphere. With increasing RF power, all the line intensities increased because the electron density increased with increasing RF power. When the Ar pressure increased, the Ba(II) and Ti(I) line intensity increased, but the $Ar^+$ line intensity decreased with increasing pressure. This result shows that high pressure is of greater benefit for the ionization of Ba than for that of Ar. Oxygen depressed the intensity of the plasma more than Ar did. When the Ar/$O_2$ ratio decreased, the intensity of Ba decreased more sharply than that of Ti. This result indicates that the plasma composition strongly depends on the discharge gas atmosphere. When the oxygen increased, the Ba/Ti ratio and the thickness of the films decreased. The emission spectra showed consistent variation with applied power to the Ti target during co-sputtering of the $BaTiO_3$ and Ti targets. The co-sputtered films showed a Ba/Ti ratio of 1.05 to 0.73 with applied power to the Ti target. The films with different Ba/Ti ratios showed changes in grain size. Ti excess films annealed at $600^{\circ}C$ did not show the second phase such as $BaTi_2O_5$ and $TiO_2$.

• 한국세라믹학회지
• /
• 제41권9호
• /
• pp.637-641
• /
• 2004

We investigated the effects of SiH$_4$ gas on the surface of Hf-silicate films during the deposition of polycrystalline (poly) Si films and the thermal stability of sputtered Hf-silicate films in poly Si/Hf-silicate structure by using High Resolution Transmission Electron Microscopy (HR-TEM) and X-ray Photoelectron Spectroscopy (XPS). Hf-silicate films were deposited by using DC-mag-netron sputtering with Hf target and Si target and poly Si films were deposited at 600$^{\circ}C$ by using Low Pressure Chemical Vapor Deposition (LPCVD) with SiH$_4$ gas. After poly Si film deposition at 600$^{\circ}C$, Hf silicide layer was observed between poly Si and Hf-silicate films due to the reaction between active SiH$_4$ gas and Hf-silicate films. After annealing at 900$^{\circ}C$, Hf silicide, formed during the deposition of poly Si, changed to Hf-silicate and the phase separation of the silicate was not observed. In addition, the Hf-silicate films remain amorphous phase.

• 한국세라믹학회지
• /
• 제41권2호
• /
• pp.106-110
• /
• 2004

NiO 산화물 타겟을 이용한 RF 마그네트론 스퍼터로 상온에서 Si(100) 기판 위에 NiO 박막을 증착시켜, 스퍼터 가스의 산소 유량비가 NiO 박막의 결정 배향성과 표면 형상에 미치는 영향을 조사하였다. Ar 가스에서 증착된 NiO 박막은 높은결정화도와 (100)면의 우선 배향성을 나타내었으나, $O_2$ 가스에서 증착된 경우에는 (111)면의 우선 배향성을 보였으며 그 증착속도도 감소하였다. 스퍼터 가스의 $O_2$ 함량에 따른 NiO 박막의 결정성과 우선배향성 변화에 대한 요인을 고찰하였으며, 박막의 표면 형상과 거칠기의 변화를 조사하였다.

• 천문학회보
• /
• 제37권2호
• /
• pp.82.2-82.2
• /
• 2012

We present an investigation of X-ray hot gas halo in 21 early-type galaxies(ETGs) from cross-matched sample of XMM-Newton(2XMM-DR3 catalog) and SDSS DR 7(0.025 < z < 0.085 and Mr <-19.5). It has been controversial whether or not the environment affects X-ray luminosity of ETGs. In this research, we mainly considered how dense the surrounding galaxies of the target galaxy are and how isolated the target galaxy is from the nearest neighboring galaxy. It appears that the second environmental factor has more effects on X-ray luminosity (0.5-2 keV) of hot gas halo than the first one. We found that the closer a galaxy is to the nearest neighboring galaxy, the brighter it is when the galaxy is located within the neighbor galaxy's virial radius. However, when a galaxy is located outside the neighbor's virial radius, the luminosity does not show any trend. In this poster, we report preliminary results from our study.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.213-213
• /
• 2000

Direct laser vaporization of transition-metal(Co, Ni)/graphite composite pellet produced single wall carbon naotubes(SWNT) in the condensing vapor in a heated flow cylinder-type tube furnace, Transition metal/graphite composite pellet target was made by mixing graphite, Co, and Ni in 98:1:1 atomic weight ratios, pressing the mixed powder, and curing it. The target was placed in a tube furnace maintained at 1200$^{\circ}C$ and Ar inert collision gas continuously flowed into the tube. The 2nd harmonic, 532nm wavelength light from Nd-YAG laser was used to vaporize the tube. The carbon nanotubes produced by the laser vaporization were accumulated on quartz tube wall. The raw carbon nanotube materials were purified with surfactants(Triton X-100) in a ultrasonicator. These carbon nanotubes were analyzed using SEM, XRD, and Raman spectroscopic method. The carbon nanotube growth on the Ni-patterned Si substrate was investigated by the CVD process. Transition-metal, Ni and CH4 gas were used as a catalyst and a reactant gas, respectively. The structure and the phonon frequencies of the carbon nanotubes formed on the patterned Si substrate were measured by SEM and Raman spectrometer.

• 대한조선학회논문집
• /
• 제60권6호
• /
• pp.397-405
• /
• 2023

As interest in greenhouse gas reduction has increased in all sectors, the discussion of the International Maritime Organization (IMO) to regulate pollution by ships is attracting attention in international shipping. At the 80th IMO MEPC held in July 2023, the 「2023 IMO Strategy for the Reduction of Green House Gases from Ships (MEPC. 377(80))」 was adopted, which included the net-zero target around 2050, and a firm intention to the decarbonization of the international shipping sector showed. In particular, energy, fuel and technology targets for zero or near-zero greenhouse gas emissions by 2030 were added as new targets, and total greenhouse gas emission checkpoints for 2030 and 2040 were added as an indicator for achieving the 2050 target. The IMO's goal setting for 2030, which is about seven years away, will impose a lot of technical, economic, and political burden despite the decarbonization technology of international shipping, which has grown to a significant level in a short period of time. Accordingly, this paper presents the comprehensive impact of the 2023 IMO GHG Strategy on international shipping.

• 한국건설순환자원학회지
• /
• 제9권3호
• /
• pp.45-56
• /
• 2014

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.912-917
• /
• 2007

Many electrochemical power devices such as solid state batteries and solid oxide fuel cell have been studied and developed for solving energy and environmental problems. An amperometric gas sensor usually generates sensing signal of electric current along the proportion of the concentration of target gas under the condition of limiting current. For narrow variations of gas concentration, the amperometric gas sensor can show higher precision than a potentiometric gas sensor does. In additional, cross sensitivities to interfering gases can possibly be mitigated by choosing applied voltage and electrode materials properly. In order to improve the sensitivity to $NO_2$, the device was attached with Au reference electrode to form the amperometric gas sensor device with three electrodes. With the fixed bias voltage being applied between the sensing and counter electrodes, the current between the sensing and reference electrodes was measured as a sensing signal. The response to $NO_2$ gas was obviously enhanced and suppressed with a positive bias, respectively, while the reverse current occurred with a negative bias. The way to enhance the sensitivity of $NO_2$ gas sensor was thus realized. It was shown that the response to $NO_2$ gas could be enhanced sensitivity by changing the bias voltage.

• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.7166-7175
• /
• 2015

본 논문은 대형 텔레비전 스탠드의 높이 조절에 있어 마찰력 감소를 위한 가스 스프링 사용에 대한 연구이다. 대상은 가스 스프링을 사용하는 50인치 이상의 대형 텔레비전의 높이 조절 동작에 적용되었다. 높이 조절 동작에 마찰력 감소를 얻기 위해서는 피스톤 로드에 작용하는 가스 씰 조임 기술을 개발해야 한다. 가스 씰 조임 기술이 작용하기 위해서는 가스 씰 조임 부의 내경, 커팅 각도 설계 및 소재 변경을 통해서 마찰력 향상을 얻을 수 있다.