• 열처리공학회지
• /
• 제12권2호
• /
• pp.117-128
• /
• 1999

This study was carried out to investigate the surface characteristics of SCM440 steel nitrided with various nitrogen contents for 7 hours at $520^{\circ}C$ by using micro-pulse plasma nitriding apparatus of hot wall type. The effects of oxidation treatment was also investigated on plasma nitrided in 30% nitrogen and post oxidized SCM440 steel at $500^{\circ}C$ in $H_2O$ atmosphere. The ${\gamma}^{\prime}-Fe_4N$ and ${\varepsilon}-Fe_{2-3}N$ phases were detected in compound layer of the nitrided steel. As the content of nitrogen in plasma gas increased with 30, 50, 70% on the micro-pulse plasma nitriding for SCM440 steel, the thickness of compound, diffusion layer and the surface hardness were increased. From the wear test results, the best wear resistance was appeared in the condition of ductile ${\gamma}^{\prime}-Fe_4N$ phase formed specimen at 30% nitrogen, whereas that of the treated with 50% and 70% nitrogen decreased owing to the exfoliation of brittle ${\varepsilon}-Fe_{2-3}N$ phase in the compound layer. On the nitrided and subsequently oxidized SCM440 steel, the surface layer consisted of $Fe_3O_4$, ${\gamma}^{\prime}-Fe_4N$, and ${\varepsilon}-Fe_{2-3}N$ phases. In these treatments, the dissolution of nitrides affect hardness and hardening depth in compound and diffusion layers. For the nitrided in 30% nitrogen and post oxidized specimen at $500^{\circ}C$ for 1 hour, the wear resistance was lower than that of the only nitrided one in 30% nitrogen but higher than those of the nitrided ones in 50 and 70% nitrogen.

• 한국건설순환자원학회논문집
• /
• 제10권4호
• /
• pp.561-568
• /
• 2022

본 연구에서는 무기계 재료인 클링커 바인더, Calcium sulfoaluminate(CSA), 그리고 sodium sulfate(Na₂SO₄)가 포함된 시멘트 모르타르의 물리적 특성 및 자기치유성능을 평가하였다. 압축강도 및 휨강도 측정을 통해 시멘트 모르타르의 물리적 강도를 알아보고, 정수위 투수시험 및 기체확산시험을 통해 치유성능을 평가하였다. 또한 광학현미경과 주사전자현미경을 통해 균열부 내 침전된 치유생성물을 시각적으로 관찰하였다. 그 결과, 클링커 바인더 기반 무기계 혼합재의 혼입은 시멘트 모르타르의 초기 및 28일 재령 강도를 약 20 % 증진시켰다. 치유성능 평가방법에 따라 치유율의 편차가 존재하고 과소평과 되는 경향을 나타냈으나, 무기계 혼합재의 시멘트 모르타르 혼입 시 0.3 mm 균열 내부에서 CaCO₃가 주요 치유생성물로 침전되어 치유성능을 향상시켰다.

• 터널과지하공간
• /
• 제34권2호
• /
• pp.89-103
• /
• 2024

처분 환경에서는 혐기성 부식, 방사선 분해, 미생물 분해와 같은 다양한 원인으로 처분용기와 완충재의 경계면에서 기체가 발생할 수 있다. 기체의 발생 속도가 완충재 내부에서의 확산 속도보다 빠를 경우, 완충재 내부에 기체가 압축되어 공극 압력이 증가함으로써 완충재의 물리적 손상을 유발할 수 있다. 특히 이때 발생한 균열을 통해 기체돌파현상이라 불리는 급격한 기체 이동 현상과 함께 방사성 핵종이 누출될 가능성이 있다. 따라서 처분 시스템의 안전성 평가를 위해서는 이러한 기체 발생 및 이동 현상에 대한 이해가 필수적이다. 이 연구에는 완충재 내 기체 이동 현상 규명을 위한 시험 장치를 문헌 연구를 통해 구축하고, 이를 활용하여 한국형 처분 시스템의 완충재 후보 물질 중 하나인 Bentonile WRK (Clariant Ltd.) 분말로 제작한 압축 시료에 대한 기체 주입 시험을 수행하였다. 시험 결과, 완충재 내 기체돌파현상 발생 지점에서 일반적으로 관측되는 특성인 응력 및 압력의 급격한 상승 경향이 뚜렷하게 관찰되었다. 또한 완충재 팽윤으로 기인한 응력의 범위는 4.7~9.1 MPa이었으며, 기체 유입 압력으로 간주할 수 있는 기체돌파현상 발생 시의 압력은 약 7.8 MPa로 확인되었다. 구축된 장치는 향후 완충재의 초기 물성 및 기체 주입 실험 초기 조건에 대한 데이터베이스 구축을 위한 다양한 실험에 활용할 수 있을 것으로 기대된다.

• Journal of Microbiology and Biotechnology
• /
• 제23권9호
• /
• pp.1229-1243
• /
• 2013

In this paper, an air isolate (NITT6L) has been screened based on hemolytic activity, emulsification activity, drop collapsing test, and oil displacement test, as well as lipase activity. It was found that strain NITT6L was able to reduce the surface tension of the medium from 61.5 to 39.83 mN/m and could form stable emulsions with tested vegetable oils. Morphological, biochemical, 16S rRNA sequencing analyses, and fatty acid methyl ester analysis using gas chromatography confirmed that the air isolate under study was Pseudomonas aeruginosa. Characterization of the biosurfactant using agar double diffusion assay revealed that the biosurfactant was anionic in nature, and CTAB-methylene blue assay and Molisch test revealed its glycolipid nature. The FT-IR spectrum confirmed that the crude biosurfactant was a rhamnolipid. Using unoptimized medium containing sucrose as the carbon source, the isolate was found to produce 0.3 mg/ml of rhamnolipid in batch cultivation (shake flask) at $37^{\circ}C$ and pH 7. Optimization of the medium components was carried out using design of experiments and the yield of rhamnolipid has been enhanced to 4.6 mg/ml in 72 h of fermentation.

• 한국수소및신에너지학회논문집
• /
• 제16권1호
• /
• pp.82-91
• /
• 2005

Polymer membrane needs to maintain appropriate moisture. Insufficient moisture causes low conduction of hydrogen ion because of increased contact resistance between electrode and membrane by shrinking membrane, and abundant moisture decreases fuel cell performance as difficulty of diffusion reacting gas. Therefore, water controlling system is very consequential for the polymer membrane fuel cell. If hollow fiber membrane humidification is used between fuel and air lines, it is possible to supply heat to fuel and air by using thermal exchanger. It can supply appropriate humidity depending on operating temperature, and can recover heat from exhaust gas which contains water vapor and air. Because of simple structure of humidification system, this system can be easily applied in the PEMFC and cut down cost.

• 한국연소학회지
• /
• 제8권4호
• /
• pp.9-14
• /
• 2003

High temperature air combustion technology has been utilized by using preheated air over 1100 K and excessive exhaust gas recirculation. Numerical analysis was performed to investigate the combustion characteristics with high temperature deficient oxygen air combustion by adopting a counterflow as a model problem accounting for detailed chemical kinetics. Methane($CH_4$) was used as a test fuel and calculated oxidizer conditions were low temperature high oxygen (300K, $X_{O2}=0.21$) and high temperature low oxygen (1300K, $X_{O2}=0.04$) conditions. The latter case showed that the flame temperature is lower than the former case and its profile showed monotonic decrease from oxidizer to fuel side, without having local maximum flame temperature at high stretch rate. Also, heat release rate was one order lower and it has one peak profile because of low oxygen concentration and heat release rate integral is almost same for stretch rate. High temperature low oxygen air combustion shows low NO emission characteristics.

• 콘크리트학회논문집
• /
• 제15권6호
• /
• pp.778-784
• /
• 2003

콘크리트의 탄산화 과정에 있어서 이산화탄소 확산계수는 매우 중요한 부분을 차지하고 있으나 이에 대한 실험적인 연구는 국 내외 적으로 매우 부족한 실정이다. 이에 따라 본 연구에서는 기체확산계수 측정장치의 개발을 통한 이산화탄소 확산계수 실험을 콘크리트, 모르타르 및 시멘트 페이스트에 대해 수행하였다. 실험결과 이산화탄소의 확산은 시편의 탄산화 여부에 관계없이 모든 시편에 대해서 약 5시간 이내에 정상상태에 도달하였다. 또한, 물-시멘트비가 큰 시편의 경우 이산화탄소 확산계수도 커졌지만 상대습도가 높을수록 물-시멘트비에 따른 확산계수 증가폭은 감소하였으며, 물-시멘트비가 일정한 경우에는 상대습도가 높아질수록 확산계수가 감소하였다. 상대습도에 따른 이산화탄소 확산계수 변화량은 물-시멘트비가 낮을수록 감소하였다. 골재의 유 무에 따른 이산화탄소 확산계수는 시멘트 페이스트가 가장 크게 나타났으며, 콘크리트와 모르타르의 경우는 시멘트 페이스트에 비해 매우 작지만 상대습도 10%인 경우를 제외하고는 모르타르의 경우가 콘크리트의 경우보다 작은 것으로 나타났다. 본 연구에서 수행한 이산화탄소 확산계수에 대한 연구결과를 통해 콘크리트 구조물의 탄산화 깊이 예측을 위한 연구가 더욱 활성화될 수 있을 것으로 기대된다.

• Journal of Plant Biotechnology
• /
• 제47권1호
• /
• pp.100-106
• /
• 2020

Coix lacryma-jobi (Hanjeli) is known to posses anti-microbial properties. Therefore, phytochemical compounds of C. lacryma-jobi have been studied to produce novel antimicrobial agents as treatments against antibiotic-resistant bacteria.The objective of this study was to determine the phytochemical composition and antibacterial activity of the C. lacryma-jobi oil against Escherichia coli, Staphylococcus aureus, and Bacillus subtilis. The phytochemical composition of the oil was determined via gas chromatography mass spectrophotometry (GC-MS). Moreover, agar disk and agar well diffusion were employed to screen the antibacterial activity of the oil. An agar well diffusion test was implemented to determinate MIC's (minimum inhibitory concentrations). Dodecanoic acid, tetradecanoic acid, 2,3-dihydroxypropylester, 1,3-dioctanoin, N-methoxy-N-methyl-3,4-dihydro-2H-thiopyran6-carboxamide, propanamide, 5-Amino-1-(quinolin-8-yl)-1,2,3-triazole-4-carboxamide, and pyridine were identified in the C. lacryma-jobi oil. The MIC value of the oil was 0.031 g/L and the MBC of the oil was 0.125 g/L effective in all test bacteria. Dodecanoic acid displayed inhibitory activity against gram-positive and gram-negative bacteria. Therefore, our research demonstrated C. lacryma-jobi (Hanjeli) oil exhibited antibacterial activity against E. coli, S. aureus, and B. subtilis. These research suggest that C. lacryma-jobi root oil could be used for medicinal purposes; however clinical and in vivo tests must be performed to evaluate its potential as an antibacterial agent.

• 천문학회지
• /
• 제26권1호
• /
• pp.1-12
• /
• 1993

In order to explore the time dependence of the closure parameters of the two-fluid calculations for supernova remnants and the terminal shocks of stellar winds, we have considered a simple model in which the time evolution of the cosmic-ray distribution function was followed in the test-particle limit using the Bohm diffusion model. The particles are mostly accelerated to relativistic energy either in the free expansion phase of the SNRs or in the early phase of the stellar winds, so the evolution of the closure parameters during these early stages is substantial and should be followed correctly. We have also calculated the maximum momentum which is limited by either the age or the curvature of these spherical shocks. We found that SNRs expanding into the medium where the gas density decreases with the distance from the explosion center might be necessary to explain the observed power-law distribution of the galactic cosmic rays. The energy loss due to the escaping energetic particles has been estimated for the terminal shocks of the stellar winds.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.25-32
• /
• 1993

Granular activated carbon is commonly used in fixed-bed adsorbers to remove organic chemicals. In this experiment organic chemical solutions were prepared by adding the reagent grade organic chemical to distilled water. Isotherm adsorption tests of volatile organic chemicals were conducted using bottle-point technique and column test. Organic chemicals after passing through the column were extracted with hexane and analyzed with gas chromatography (Hewlett-Packard 5890) to check the adsorption capacity and breakthrough curve. The result were as follows: 1. The BET surface area of coconut activated carbon was 658~1,010 m$^2$/g where as coconut shell carbon was 6.6 m$^2$/g. Coconut activated carbon increased the BET surface area and adsorption capacity in bottle-point isotherm. 2. The adsorption capacity of coconut activated carbon for trichloroethylene (TCE) was reduced in the presence of humic substance. 3. A decrease in particle size of activated carbon resulted in higher adsorption capacity and lower intraparticle diffusion coefficient. It is reflected not only as a decrease in Freudlich adsorption capacity value (K) but also as an increase in Freudlich exponenent value (1/n).