• 한국수소및신에너지학회논문집
• /
• 제17권4호
• /
• pp.379-388
• /
• 2006

Two mesophilic trickling bed bioreactors filled with two different types of media, hydrophilic- and hydrophobic-cubes, were designed and conducted for hydrogen production under the anaerobic fermentation of sucrose. Each bioreactor consisted of the column packed with polymeric cubes and inoculated with heat-treated sludge obtained from anaerobic digestion tank. A defined medium containing sucrose was fed by the different hydraulic retention time(HRT), and recycle rate. Hydrogen concentrations in gas-phase were constant, averaging 40% of biogas throughout the operation. Hydrogen production rate was increased till $10.5\;L{\cdot}h^{-1}{\cdot}L^{-1}$ of bioreactor when influent sucrose concentrations and recycle rates were varied. At the same time, the hydrogen production rate with hydrophobic media application was higher than its hydrophilic media application. No methane was detected when the reactor was under a normal operation. The major fermentation by-products in the liquid effluent of the both trickling biofilters were acetate, butyrate and lactate. In order to run in the long term operation of both reactor filled with hydrophilic and hydrophobic media, biofilm accumulation on hydrophilic media and biogas produced should be controlled through some process such as periodical backwashing or gas-purging. Four sample were collected from each reactor on the opposite hydrogen production rate, and their bacterial communities were compared by terminal restriction fragment length polymorphism (T-RFLP) analysis of PCR products generated using bacterial 16s rRNA gene primers (8f and 926r). It was expressed a marked difference in bacterial communities of both reactors. The trickling bed bioreactor with hydrophobic media demonstrates the feasibility of the process to produce hydrogen gas. A likely application of this reactor technology can be hydrogen gas recovery from pre-treatment of high carbohydrate-containing wastewaters.

• Journal of the Korean Wood Science and Technology
• /
• 제37권6호
• /
• pp.537-545
• /
• 2009

본 연구는 일반 페인트 및 건조시멘트에 목탄을 첨가하여 제조된 건축자재의 제반 물리 화학적 특성 조사를 바탕으로 하여 목탄의 친환경 건축자재 혼합제로서의 활용 가능성을 모색하기 위한 목적으로 수행되었다. 목탄을 포함한 액상몰탈의 물리 화학적 물성 시험결과, 목탄 20% 이상을 포함한 액상몰탈의 경우, 점도에 대한 저항치인 주도와 불휘발분이 품질기준에 적합하였다. 목탄 첨가량이 증가할수록 건조시간은 지연되었으나, 모든 처리구에서 품질기준인 60분 이내에서 건조가 완료되었다. 기타 제반 물성에서는 모든 처리구에서 품질기준을 충족하였다. 이 결과로 볼 때, 액상 몰탈에 대한 적정 목탄 함량은 25%로 판단된다. 건조 시멘트 몰탈에 대한 압축강도는 목탄 5% 첨가구에서 가장 우수하였으며, 20% 이상 첨가구에서는 KS 기준치에 비해 낮은 것으로 조사되었다. 또한 목탄 첨가량 증가로 보수성은 지속적으로 증가하며, 암모니아가스 탈취율의 경우 일반 시멘트 몰탈이 59.5%, 목탄 10% 첨가 시멘트 몰탈은 71.6%의 암모니아를 흡착하였다.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.106-113
• /
• 2024

Understanding the tritium release and retention behavior of candidate tritium breeder materials is crucial for breeder blanket design. Recently, a melt spraying process was developed to prepare Li₄SiO₄ pebbles, which were subsequently subjected to the in-pile tritium production and extraction platform in China Mianyang Research Reactor (CMRR) to investigate their in-situ tritium release behavior and irradiation performance. The results demonstrate that HT is the main tritium release form, and adding hydrogen to the purge gas reduces tritium retention while increasing the HT percent in the purge gas. Post-irradiation experiments reveal that the irradiated pebbles darken in color and their grains swell, but the mechanical properties remain largely unchanged. It is concluded that the tritium residence time of Li₄SiO₄ made by melt spraying method at 467 ℃ is approximately 23.34 h. High-density Li₄SiO₄ pebbles exhibit tritium release at relatively low temperatures (<600 ℃) that is mainly controlled by bulk diffusion. The diffusion coefficient at 525 ℃ and 550 ℃ is 1.19 × 10^-11 cm²/s and 5.34 × 10^-11 cm²/s, respectively, with corresponding tritium residence times of 21.3 hours and 4.7 hours.

• Journal of Pharmaceutical Investigation
• /
• 제27권3호
• /
• pp.181-187
• /
• 1997

The purpose of this work was to investigate pharmacokinetics of alcohol as a function of dose and time of administration of ethanol. The pharmacokinetics of alcohol 15 min after and before oral administration of aspartate-containing compositions to rats were also evaluated. The retention time of acetaldehyde, alcohol and isopropyl alcohol an internal standard in gas chromatogram was 3.6, 6.0 and 10.5 min, respectively. The maximum concentration of alcohol $(C_{max})$ and area under the blood concentration (AUC) were significanly increased as a function of ethanol dose in a nonlinear fashion. The significant diurnal variation of alcohol pharmacokinetics was also noted, showing fast metabolism and elimination when given orally in the night time. When APAP was given after administration alcohol (1g/kg) to rats, AUC and $C_{max}$ were increased when compared to alcohol only. However, AUC and $C_{max}$ were decreased when aspartate or standard complex compositions containing aceaminophen (APAP, 250mg). sodium L-aspartate(25 mg), dl-methionine (125 mg) and anhydrous caffeine (25 mg) was orally given by coupling malate/asparate shuttle in hepatocyte. The blood alcohol concentration profiles between aspartate and standard complex compositions were similar when given before or after administration alcohol (1g/kg) to rats. No significant difference of administration sequence was observed. However, it was noted that AUC and $C_{max}$ of standard complex compositions given before alcohol administration were significantly lower when compared with alcohol only. Based on these findings, dose, time of administration and composition of drugs to improve alcohol metabolism and elimination were considered to be important in the pharmacokinetics of alcohol. The administration sequence of drug compositions and alcohol might be also considerd.

• 상하수도학회지
• /
• 제13권4호
• /
• pp.35-44
• /
• 1999

In this study, it was attempted to remove nitrate and carbon in a single-stage reactor using acetate as substrate. Hybrid type upflow sludge baffled filter reactor was adopted using anaerobic sludge. Sludge bed in the bottom of reactor was intended to remove carbon and nitrate by denitrification and methanogenesis. And floating media in the upper part of reactor were intended to remove remaining carbon which was not removed due to the inhibition of nitrogen oxide on methane producing bacteria. The reactor removed over 96% of COD and most of nitrate with volumetric loading rate of $4.0kgCOD/m^3{\cdot}day$, hydraulic retention time of 24hr, 4,000mgCOD/L, and $266mgNO_3-N/L$. Nitrate in anaerobic sludge was converted to nitrogen gas(denitrification) or ammonia (ammonification) according to pH of influent, COD removal efficiency was easily affected by the change of volumetric loading rates and nitrate concentration. And when influent pH was about 4.7, most nitrate changed to ammonia while when influent pH was about 6.8~7.0, most nitrate denitrified independent of $COD/NO_3-N$ ratio. Most granules were gray and a few were black. In gray-colored granule, black inner side was covered with gray substance and SEM illustrated Methanoccoci type microorganisms which were compact spherical shape. Anaerobic filter removed residual COD effectively which was left in sludge bed due to the inhibition of nitrogen oxide.

• 한국식품영양과학회지
• /
• 제23권3호
• /
• pp.472-480
• /
• 1994

Allicin was synthesized for the purpose of identification an dquantitation of a pharmaceutical dosage form in soft capsules. The identified transformed products fro allicin were dially disulfide , 3-vinyl-[4H]-1, 2-dithiin and 2-vinyl-[4H]-1, 3-dithiin in gas chromatrographic conditions and dially disulfide and ajoene in HPLC. Allicin is thermally unstable , it may be completely decomposed to vinyl dithiin isomers in GC conditions. For that reason, allicin was not found directly in the pharmaceutical dosage forms. In HPLC conditions, mobile phase was methanol /water containing 0.1% formic acid(65/35) and column was $\mu$-Bondapak C18. Detection wa-velength was 254nm. The retention time of allicin was 6.98min. The calibration ranger for allicin was 10 $\mu\textrm{g}$/ml to 200$\mu\textrm{g}$/ml and correlation coefficient(r) was 0.987.

• 한국미생물·생명공학회지
• /
• 제30권1호
• /
• pp.91-97
• /
• 2002

Removal of malodorous gases from swine manure by a polyurethane biofilter inoculated with heterotrophic and autotrophic bacteria was investigated. Ammonia, hydrogen sulfide and other gases could be efficiently treated at 3~3.6 second of empty bed retention time by the polyurethane biofilter. In the range of SV $200~l,200h^{-1}$ , the average removal efficiency of odor was about 89% when the odor unit of inlet gas was below 4100. Odor elimination capacity of the polyurethane biofilter was$ 1.8$\times$10^{5}$ $~5.0$\times$10^{7}$OUㆍm$^{-3}$ㆍ$h^{-1}$ that were 84~90% of the inlet load. The critical loads of $NH_3$ and $H_2$S, which mean 97% removal with respect to the inlet loads, were 31 and $27 g.m^{-3}$ ㆍ$h^{-1}$ , respectively. The maximum elimination capacities of $NH_3$ and $H_2$S were 56 and $157 gㆍm^{-3}$ ㆍh$^{-1}$ , respectively. Although the removability for$ NH_3$ and $H_2$S was not influenced by $H_2$S$NH_3$ ratio (ppmv/ppmv), the $H_2$S removability was inhibited by high $H_2$S concentration more than 80 ppmv.

• Advances in environmental research
• /
• 제7권1호
• /
• pp.39-52
• /
• 2018

Direct membrane filtration (DMF) of wastewater has many advantages over conventional biological wastewater treatment processes. DMF is not only compact, but potentially energy efficient due to the lack of biological aeration. It also produces more biosolids that can be used to produce methane gas through anaerobic digestion. Most of ammoniacal nitrogen in wastewater is preserved in effluent and is used as fertilizer when effluent is recycled for irrigation. In this study, a technical feasibility of DMF was explored. Organic and nitrogen removal efficiencies were compared between DMF and membrane bioreactor (MBR). Despite the extremely high F/V ratio, e.g., $14.4kg\;COD/m^3/d$, DMF provided very high COD removal efficiencies at ~93%. Soluble microbial products (SMP) and extracellular polymeric substances (EPS) were less in DMF sludge, but membrane fouling rate was far greater than in MBR. The diversity of microbial community in DMF appeared very narrow based on the morphological observation using optical microscope. On the contrary, highly diverse microbial community was observed in the MBR. Microorganisms tended to form jelly globs and attach on reactor wall in DMF. FT-IR study revealed that the biological globs were structurally supported by feather-like materials made of secondary amines. Confocal laser scanning microscopy (CLSM) study showed microorganisms mainly resided on the external surface of microbial globs rather than the internal spaces.

• 약학회지
• /
• 제41권3호
• /
• pp.277-282
• /
• 1997

Methamphetamine, which is the most commonly abused drug in Korea, exists in terms of d-, l- isomers and a racemate(dl). d-Methamphetamine is a potent central nervous system stimulant, whereas l-Methamphetamine is sold freely as a nasal decongestant. In addition, methamphetamine appears in different ratios of optical isomers by the clandestine synthesis applied. In this study, enetiomeric separation of methamphetamines was estabilished to distinguish the chirality of methamphetamines trafficked and abused in Korea. A gas chromatograph/mass spectrometer(GC/MS) system equipped with an achiral capillary column is used to isolate the isomers of methamphetamine after (S)-N-(trifluoroacetyl)-l-prolyl(TFP) deravatization.After analyzing 10 illicit methamphetamine powders and 10 positive urine samples, following findings were found: d-Methamphetamine was well resolved from l-Methamphetamine by chromatographic separation of TFP derivatibes on DB-5 with retention time of 11.80 and 11.35 min respectively. The detection of d-Methamphetamine in all 10 powders and 10 urine samples proves that all methamphetamines abused in Korea are illegally manyfactured and administred.

• 한국연초학회지
• /
• 제28권2호
• /
• pp.67-74
• /
• 2006

This study was carried out to investigate the changes of essential oils in flue-cured leaf tobacco during aging for 21 months. The threshed leaf tobacco(BlO) produced in 2002 crop year was aged for 21 months in the warehouse of Oc-Cheon Leaf Tobacco Processing Factory. The leaf tobacco were sampled at three month intervals for analysis of volatile compounds. Volatile compounds were identified by GC/MS and comparison of gas chromatographic retention time with those of the authentic standard. The total of 75 compounds from the steam volatile concentrate of the flue-cured leaf tobacco were identified; they were 15 hydrocarbons, 12 alcohols, 3 aldehydes, 18 ketones, 7 esters, 10 acids, 3 phenols, 4 furans, 2 pyrrols and 1 pyridine. The major components of essential oil were neophytadiene, solanone, megastigmatrienone and phytol. After a aging period of 21 months, most of volatile compounds showed a gradual increasing tendency.