• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1639-1644
• /
• 1990

본 연구에서는 경계층 해석 방법의 범위 내에서 복사열전달의 영향을 고려하 는데 있어서 매질의 광학적 두끼ㅔ가 얇다고 가정하여 매질 내부에서의 자체적인 복사 열의 후ㅂ수는 무시하고, 가스의 방사 에너지가 모두 벽으로 전된다고 가정하였으며 복사 전달량은 평균광로(mean beam length)를 고려한 가스방사율을 도입하여 복사전달 량을 계산하였다.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.129-136
• /
• 2012

On this study, $CO_2$ gas, net of Ar gas, and mixed gas in solid wire(AWS ER 70S-6) and flux cored wire(AWS E71T-1) were used to weld on Mild steel(SS400). After the progress, the status changes of the welds in Mild steel(SS400) were investigated with compositional changes. For stable experiments, welding was conducted using the automatic feeder. Radiation testing, hardness testing, chemical composition analysis and penetrated cross-section were measured. Through these experiments, shapes of penetrated cross-section, chemical composition changes, and weld defects according to the variation of welding gas were known. Weld defects and weld cross-sectional shapes by the variation of the welding voltage were also detected.

• 분석과학
• /
• 제28권1호
• /
• pp.8-16
• /
• 2015

We prepared a novel electrochemical gas sensor (EG sensor) based on interdigitated electrode (IDE) coated with vinyl ionic liquids (ILs) as electrolyte and Pt-Ru-Mo/MWNT electrocatalysts for occurring redox-active of CNCl gas. The vinyl ILs such as 1-butyl-3-(vinylbenzyl)imidazolium chloride, $[BVBI]^+Cl^-$, and 3-hexyl-1-vinylimidazolium bromide, $[HVI]^+Br^-$, were synthesized by $SN_2$ reaction in order to use electrolyte. The Pt-Ru-Mo/MWNT electrocatalysts were also prepared by one-step radiation-induced reduction of metal ions in the presence of MWNTs as supports. The fabricated EG sensor with vinyl ILs electrolyte was evaluated through optical microscopy (OM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The prepared EG sensor is clearly detected over 2.0 ppm CNCl gas and is exhibited a liner relationship between current and concentration over a region of 10-100 ppm.

• 대한기계학회논문집B
• /
• 제21권10호
• /
• pp.1363-1370
• /
• 1997

Single liquid droplet combustion processes including heating, evaporation, droplet burning and flame radiation were theoretically investigated by adopting nongray gas radiation model for the radiative transfer equation (RTE). n-Heptane was chosen as a fuel and the numerical results were compared with the experimental data available in the literature. The discrete ordinate method (DOM) was employed to solve the radiative transfer equation and the weighted sum of gray gases model (WSGGM) was applied to account for nongray effect by CO$_{2}$, and H$_{2}$0. Therefore, detailed effects by nongray gas and its comparison with the gray gas model could be figured out in the results. It is found that the radiative heat flux is higher when the nongray model is used, thereby reducing the maximum gas temperature and the flame thickness, but the total burning time increases due to the deceased conductive heat flux in nongray model. Consequently, a better agreement with experimental data could be obtained by using nongray model.

• Nuclear Medicine and Molecular Imaging
• /
• 제41권6호
• /
• pp.566-569
• /
• 2007

목적: 의약품의 FDA 개정에 따라 $[^{18}F]$FDG에 휘발성 유기 용매의 분석을 GC로 수행하였다. $[^{18}F]$FDG 주사액은 약 3개월에 걸쳐 생산하면서 정도관리를 수행하였다. 대상 및 방법: $[^{18}F]$FDG 주사액에 존재하는 잔류유기용매의 종류를 줄이기 위해 $[^{18}F]$FDG자동합성장치를 ethanol을 이용해 세정하였다. $[^{18}F]$FDG주사액은 FID가 장착된 Hewlett-Packard 6890 Gas Chromatograph로 분석을 수행하였다. 생산된 $[^{18}F]$FDG의 시료는 상온에서 밀봉된 Vial에 보관하였고 일주일 내에 분석하였다. 결과: $[^{18}F]$FDG 생성물에서 ethanol의 양은 $16.8\sim2762.8ppm$이 검출 되었고 acetonitrile의 양은 $2.3\sim327.6ppm$이 검출 되었다. 결론: 약 3개월간 생산한 $[^{18}F]$FDG 주사액 중에 ethanol과 acetonitrile잔류 용매를 측정해본 결과 USP 허용기준인 ethanol 5000 ppm과 acetonitrile 400 ppm 이하가 유지됨을 확인하였다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 추계학술발표회요약집
• /
• pp.334-334
• /
• 1999

• 한국광학회지
• /
• 제1권1호
• /
• pp.33-39
• /
• 1990

방전여기 방식의 KrF 엑사이머 레이저의 컴퓨터 시뮬레이션 프로그램을 개발하여 방전 중의 $KrF^*$ 형성, 탈여기 및 흡수반응 등에 대한 완충가스의 영향에 관해 해석하였다. He 가스와 Ne 가스의 경우 $KrF^*$ 생성효율은 각각 7.5%, 19%였으며, $KrF^*$ 탈여기는 충전전압 30kV에서 각각 45, 30%의 비율을 차지하였다. 그러나 흡수과정에서는 완충가스의 영향이 10% 이하였다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2000년도 추계학술발표회 논문집
• /
• pp.221-227
• /
• 2000

• 한국안전학회지
• /
• 제32권2호
• /
• pp.14-20
• /
• 2017

A numerical study was conducted to identify the predictive performance for the bare-bead thermocouple (TC) using FDS (Fire Dynamics Simulator) in simulated thermal environments of fire. A relative prediction bias of TC temperature calculated from reverse-radiation correction by FDS was evaluated with the comparison of previous experimental data. As a result, it was identified that the TC temperatures predicted by FDS were lower than the temperatures measured by bare-bead TC for the ranges of heat flux and gas temperature considered. The relative prediction bias of TC temperature by FDS was gradually increased with the increase in radiative heat flux and also significantly increased with the decrease in the gas temperature. Quantitatively, at the gas temperature of $20^{\circ}C$, the TC temperature predicted by FDS had the relative bias of approximately -20% with the radiative heat flux of $20kW/m^2$ corresponding to thermal radiation level of the flashover. It is predicted from the present study that more accurate validation of fire modeling will be possible with the quantitative prediction bias occurred in the process of reverse-radiation correction of temperature predicted by FDS.

• 한국재료학회지
• /
• 제12권1호
• /
• pp.27-35
• /
• 2002

In laser materials processing, localized heating, melting and evaporation caused by focused laser radiation forms a vapor on the material surface. The plume is generally an unstable entity, fluctuating according to its own dynamics. The beam is refracted and absorbed as it traverses the plume, thus modifying its power density on the surface of the condensed phases. This modifies material evaporation and optical properties of the plume. A laser-produced plasma plume simulation is completed using axisymmetric, high-temperature gas dynamic model including the laser radiation power absorption, refraction, and reflection. The physical properties and velocity profiles are verified using the published experimental and numerical results. The simulation results provide the effect of plasma plume fluctuations on the laser power density and quantitative beam radius changes on the material surface. It is proved that beam absorption, reflection and defocusing effects through the plume are essential to obtain appropriate mathematical simulation results. It is also found that absorption of the beam in the plume has much less direct effect on the beam power density at the material surface than defocusing does and helium gas is more efficient in reducing the beam refraction and absorption effect compared to argon gas for common laser materials processing.