• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.3
• /
• pp.435-444
• /
• 1999

This paper summarizes the size and output of the major animal industries in Australia and the feed resource available to maintain production. The most important feed source is pasture but there is also extensive use of cereal grains, pulses and by-products in the intensive animal industries and in supplementing the diet of grazing animals. These resources must be used in ways that ensure sustainable production. We outline a number of Decision Support Systems such as GrazFeed, GrassGro, and AusPig which play an important role in optimizing the way in which resources are used. Waste management with respect to mineral pollution of water courses and methane production as a greenhouse gas are important issues for the animal industries and are also considered.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.398-402
• /
• 1987

In the process industries control & organization consist of interconnections on different levels. The process controls that run these industries are a collection of well-defined functions in the form of standard modules interconnected by a communication network. Real-Time(throughput, response time), operator communication, flexibility, back-up and recovery needs have distribute organization of both system hardware and software. Multi-level systems are aften advocated for controlling complex systems, such as, electric, water, oil, gas plants. In practice, these systems encompass computers and person with their various communication requirements and limitations. Hence, Careful mutual adaptation of computer communications and organizational structure is necessary. This paper concentrates on these interactions between process control and organization on the basis of industrial case studies.

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.1-8
• /
• 2016

North Korea is currently undergoing an economic crisis of industrial productivity reduction, which resulted from decreased energy production and economic sanctions due to conflicts with the international society. This paper examined the technological status of North Korea's natural gas and coal industries which are essential sectors for recovery of the economy and North-South cooperation on energy industry. This paper also analyzed investment strategies in North Korean energy industries and calculated the size of economic ripple effect of the investment on North and South Korea. In order to analyze the effect of the investment on North Korean economy, we constructed an inter-industry relation table of North Korea for year 2014 and used an input-output model. The ripple effect of the investment in natural gas and coal industries turned out to be 1.012 billion dollars and 2.742 billion dollars respectively. In order to analyze the ripple effect of the investment on South Korean economy, we constructed an inter-industry relation table of South Korea for year 2013 and used a demand-driven model for inter-industry analysis. As a result, production, added-value and employment inducement coefficients of the investment were calculated as 2.02073, 0.62697 and 8.99409 for the natural gas industry and 2.02130, 0.62701 and 9.00413 for the coal industry respectively.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.669-691
• /
• 2022

In this analysis, from the perspective of the business ecosystem, the economic effects of the oil and gas E&P industry were estimated. Australia, Norway, and the US, which are countries that are active in oil and gas E&P projects, and Japan and Korea, which are not, were analyzed. According to the analysis results, every country has a induced production coefficient of the oil and gas E&P industry greater than 1. Norway and the US have formed an industrial ecosystem across all industries, evenly demanding intermediate inputs for the primary, secondary, and tertiary industries. In contrast, Korea and Japan have a very large input ratio from the tertiary industry and an industrial ecosystem centered on the tertiary industry. It should be considered that the high input ratio of certain industry in business ecosystem determine the scale of the induced effect. When the business ecosystem are formed with many industries evenly, and the induced coefficient is high, it is necessary to increase the amount of final demand of the industry to make the effects of coefficient to increase.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.137-142
• /
• 2005

Gas-Assisted Injection Molding(GAIM) is an innovative technology for producing plastic parts and has been received extensive attention in the plastic manufacturing industries. But, due to gas-polymer interacting during the gas injection phase, the process has significantly different characteristics from conventional injection molding and, therefore, the control of the process requires much technical knowledge in processing and materials. The experiment was performed about variations of gas-penetration length that is affected by filling imbalance resulting from the structure of runner. The Taguchi method was used for the design of experiment. The most effective factors for the gas-penetration length were the shot size and mold temperature. The most effective factors for the difference of the gas-penetration length were the melt temperature and shot size. This study also discussed the filling imbalance phenomenon in a unary branch runner type mold that has geometrically balanced runner.

• Journal of Sensor Science and Technology
• /
• v.27 no.5
• /
• pp.352-356
• /
• 2018

This paper relates to a technology for monitoring a liquefied gas storage tank in the special gas field where demand is increasing owing to the continuous growth of related fields such as the semiconductor, display, and ICT convergence electronics industries. We have proposed a system for real - time monitoring using wireless sensor network technology, and implemented a system consisting of a sensor unit, transmitter module, and receiver module to be attached to a liquefied gas storage tank. The system was applied to LCO2 tanks among various liquefied gas storage tanks to verify the feasibility. The storage tanks employed in the experiments has capacities of 16,179 l and was 1,920 mm in inner diameter. Furthermore, the density was 1.03 g/l. The measured data were compared with reference data on the remaining gas level versus the $CO_2$ height of the surface, expressed using a conventional water meter, provided by an existing storage tank supplier. The experimental results show that the data is similar to the standard data provided by the tank supplier, and has a high accuracy and reliability within an error range of 0.03%.

• The Journal of Engineering Geology
• /
• v.24 no.3
• /
• pp.423-429
• /
• 2014

Development of a reservoir pressure core sampler (PCS) with a built-in data logging system (DLS) for recording real-time temperature and pressure observations is critical in domestic hydrocarbon production to accurately measure and monitor reserves of shale gas, coalbed methane, and gas-hydrate. Another purpose of this new technology is to minimize the loss of gas from the core as the drill core is collected. This is accomplished by maintaining the pressure of the sample from the moment the drill core is obtained at depth, thus allowing an accurate analysis of shale gas, coalbed methane gas, and gashydrate within the core. Currently, the United States and European countries have monopolized the development and marketability of PCS technologies. We are thus developing a reservoir PCS by analyzing the operating principle and mechanisms of the existing PCS, and by conducting tests on the existing PCS. We further aim to develop a PCS with a maximum operating pressure of 100 bar, a maximum operating temperature of $-20^{\circ}C$ to $40^{\circ}C$, and a pressure loss rate of 10%.

• Journal of the Korean Institute of Gas
• /
• v.10 no.4 s.33
• /
• pp.17-22
• /
• 2006

Both of district heating(DH) system and natural gas(NG) supply system have benefits in clean energy supply and having energy efficiency and savings. The issue of duplicate investment and supply requirement of only for cook occur several conflicts such as destruction of the Beneficiary Pays Principle and Cross Subsidization, etc. Under the circumstance, the purposes of this research are to consider several issues of cross subsidization in NG and DH industries and to present the following alternatives for resolving related problems. First of all, a charging mechanism in the energy cost must be improved so as to maintain the positive relation between cost and benefit. That is, the beneficiary-pay principle must be strictly applied. Secondly, the extended supply of DH through HOB(Heat Only Boiler) must be strictly limited. Finally, we need to improve efficiency for the benefit of market participants.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.2
• /
• pp.158-168
• /
• 2007

The cement industry is one of the energy intensive industries such as petrochemical and steel industry. The energy efficiency of cement industry is high comparing to oversea's cement industries due to the enforcement of energy conservation policies. The purpose of this study is estimate emission factors for greenhouse gas ($CO_{2}$) in cement industry. The results of field study, quicklime contained quantity of five factories were $0.64{\sim}0.65$. Measurement emission (15,382 ton/day) is 40% higher than process emission (8,929 ton/day) on the IPCC Guidelines (1996). Add to combustion emission on the lines of IPCC Guidelines (1996) is similar to the emission of this study. The emission factor of greenhouse gas ($CO_{2}$) were as follows the emission factor between $9.01E-01{\sim}2.15E-01\;ton/ton$ for $CO_{2}$. The result of this study is higher than emission factor of IPCC (0.51) but it is similar to U.S. EPA's (0.952).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.390-390
• /
• 2012

Information technology industries has grown rapidly and demanded alternative memories for the next generation. The most popular random access memory, dynamic random-access memory (DRAM), has many advantages as a memory, but it could not meet the demands from the current of developed industries. One of highlighted alternative memories is magnetic random-access memory (MRAM). It has many advantages like low power consumption, huge storage, high operating speed, and non-volatile properties. MRAM consists of magnetic-tunnel-junction (MTJ) stack which is a key part of it and has various magnetic thin films like CoFeB, FePt, IrMn, and so on. Each magnetic thin film is difficult to be etched without any damages and react with chemical species in plasma. For improving the etching process, a high density plasma etching process was employed. Moreover, the previous etching gases were highly corrosive and dangerous. Therefore, the safety etching gases are needed to be developed. In this research, the etch characteristics of CoFeB magnetic thin films were studied by using an inductively coupled plasma reactive ion etching in $CH_4/O_2/Ar$ gas mixes. TiN thin films were used as a hardmask on CoFeB thin films. The concentrations of $O_2$ in $CH_4/O_2/Ar$ gas mix were varied, and then, the rf coil power, gas pressure, and dc-bias voltage. The etch rates and the selectivity were obtained by a surface profiler and the etch profiles were observed by a field emission scanning electron microscopy. X-ray photoelectron spectroscopy was employed to reveal the etch mechanism.